www.tracopower.com Page 1
Features
DC/DC Converter
TES 3 Series 3 Watt
Models
The TES 3 converter series is intended for all applications where PCB’s are
assembled on an automated SMD production line. The smaller size DIL-pack-
age and the light weight allows easy handling by pick-and-place machines.
With their small footprint these converters are the state-of-the-art solution for all
on-board power applications demanding an isolated and regulated output
voltage.
Surface Mount DIL-Package
15 Standard Models
Regulated Output V oltage
Wide 2:1 Input Range
High Efficiency up to 83%
I/O-Isolation 1500 VDC
Operating Temperature –40 to +75°C
Short Circuit Protection
High Accuracy of Pin Co-Planarity
Reflow Soldering to
CECC00 802, Issue 2
2 Year Product Warranty
Ordercode Input voltage range Output voltage Output current max. Ef ficiency typ.
TES 3-1210 3.3 VDC 700 mA 75 %
TES 3-1211 5 VDC 600 mA 79 %
TES 3-1212 9 – 18 VDC 12 VDC 250 mA 82 %
TES 3-1222 ± 12 VDC ± 125 mA 81 %
TES 3-1223 ± 15 VDC ± 100 mA 81 %
TES 3-2410 3.3 VDC 700 mA 76 %
TES 3-2411 5 VDC 600 mA 80 %
TES 3-2412 18 – 36 VDC 12 VDC 250 mA 83 %
TES 3-2422 ± 12 VDC ± 125 mA 82 %
TES 3-2423 ± 15 VDC ± 100 mA 82 %
TES 3-4810 3.3 VDC 700 mA 76 %
TES 3-4811 5 VDC 600 mA 80 %
TES 3-4812 36 – 75 VDC 12 VDC 250 mA 83 %
TES 3-4822 ± 12 VDC ± 125 mA 82 %
TES 3-4823 ± 15 VDC ± 100 mA 82 %
www.tracopower.com Page 2
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current no load /full load 12 Vin models 20 mA / 300 mA typ.
24 Vin models 5 mA / 150 mA typ.
48 Vin models 3 mA / 75 mA typ.
Start-up voltage / 12 Vin models 6 VDC / 8VDC typ.
under voltage shut down 24 Vin models 12 VDC / 16VDC typ.
48 Vin models 24 VDC / 32VDC typ
Surge voltage (1 sec. max.) 12 Vin models 25 V max.
24 Vin models 50 V max.
48 Vin models 100 V max.
Reverse voltage protection 0.5 A max.
Reflected input ripple current Can be reduced by ext. 1–2.2 µF polyester film
capacitor
Input filter Pi filter
Output Specifications
V oltage set accuracy ± 1 %
Regulation – Input variation Vin min. to Vin max. ± 0.3 % max.
– Load variation 10 – 100 %
– single output models ± 1.0 % max.
– dual output models balanced load ± 1.0 % max.
– dual output models unbalanced load ± 2.0 % max.
Ripple and noise 50 mVpk-pk max.
Temperature coefficient ± 0.02 % / °C
Current limitation > 110% of Iout max., foldback
Short circuit protection Hiccup mode, indefinite
(no automatic recovery)
Capacitive load – single output models 470 µF
– dual output models 180 µF
General Specifications
Temperature ranges – Operating –40 °C ... +75 °C
– Case temperature +100 °C max.
– Storage –40 °C ... +125 °C
Humidity (non condensing) 95 % rel H max.
Reliability , calculated MTBF (MIL-HDBK-217E) >1‘000‘000 h @ 25 °C
Isolation voltage Input/Output 1‘500 VDC
Isolation capacity Input/Output 65 pF typ.
Isolation resistance Input/Output >1‘000 Mohm
Switching frequency 300 kHz typ. (Frequency modulation PFM)
Safety standards UL 1950, EN 60950, IEC 60950
Compliance up to 60 VDC input voltage
(SELV limit)
Safety approvals UL/cUL File E188913
DC/DC Converter
TES 3 Series 3 Watt
www.tracopower.com Page 3
Specifications can be changed without notice
Outline Dimensions mm (inches)
2.54
(0.1)
2.16
(0.085)
17.78
(0.7)
0.5 (0.02)
1
24
10.2
(0.402)
Top View
32.3
(1.272)
0
.15 (0.006)
1.0
(0.04)
13
Detail A
Seating
Plane
S
M10:1
1.0 (0.04)
1.3 (0.051)
16.1
(0.634)
14.8
(0.583)
18.8
(0.740)
Detail
A
0.15
12
Physical Specifications
Case material non conductive black plastic
(flammability to UL 94-V0)
Package weight 10 g (0.35 oz)
Reflow soldering profile Peak temp. 230°C (10 sec max.)
185°C for 90 sec max.
Convection reflow solder process is recommended
Pin-Out
Pin Single Dual
1–Vin (GND) –Vin (GND)
2–Vin (GND) –Vin (GND)
3NC NC
10 NC Common
11 NC NC
12 NC –V Output
13 +V Output + V Output
14 NC NC
15 –V Output Common
22 NC NC
23 +Vin (Vcc) +Vin (Vcc)
24 +Vin (Vcc) +Vin (Vcc)
DC/DC Converter
TES 3 Series 3 Watt
Page 4
Specifications can be changed without notice
Solder Pad Dimensions mm (inches)
Jenatschstrasse 1 • CH-8002 Zurich • Switzerland
Tel. +41-1284 2911 • Fax +41-1201 1168 • e-mail: sales@traco.ch • internet: http://www.tracopower.com
Rev. 10/01
1.5 Min.
(0.059 Min.)
2.8
(0.11)
20
.0
(0.787)
2.16
(
0.085)
2.54
(0.1)
17.78
(0.7)
27.94
(1.1)
1
2.54
(0.1)
2.54
(0.1)
2.54
(0.1)
DC/DC Converter
TES 3 Series 3 Watt
