CCD TOF Signal Processor with Programmable Timing and V-Driver ADDI9036 Data Sheet FEATURES GENERAL DESCRIPTION 12-bit, 45 MHz ADC CDS with variable gain 0 dB to 36 dB, 10-bit VGA Black level clamp with variable level control Precision Timing core with 174 ps resolution Integrated, 7-channel H-driver and RG clock drivers 7-channel LD driver Integrated 16-channel V-driver Complete on-chip ISA timing generator I2C serial interface MIPI CSI-2 transmit interface with support for 1 or 2 data lanes On-chip driver for external crystal 8 GPOs 6 mm x 6 mm, 117-ball WLCSP package with 0.5 mm pitch The ADDI9036 is a complete, 45 MHz, front-end solution for charge coupled device (CCD) time of flight (TOF) imaging applications. The ADDI9036 includes an analog front end (AFE), a programmable instruction set architecture (ISA) timing generator (ISATG), a 7-channel laser diode (LD) driver, a 7-channel H-driver, and a 16-channel vertical driver (V-driver). The Precision Timing(R) core allows adjustment of the CCD horizontal clocks and LD outputs with approximately 174 ps resolution at 45 MHz operation. The AFE includes black level clamping, a correlated double sampler (CDS), a variable gain amplifier (VGA), and a 12-bit analog-to-digital converter (ADC). The AFE data is output through the MIPI(R) CSI-2 transmit interface. The internal registers can be programmed by an I2C serial interface. APPLICATIONS The ADDI9036 is packaged in a 6 mm x 6 mm, 117-ball WLCSP and is specified over an operating temperature range of -20C to +85C. TOF CCD cameras FUNCTIONAL BLOCK DIAGRAM REFT REFB VREF ADDI9036 DATA0P AUXIN CDS 12 12-BIT ADC VGA CCDIN DEPTH PROCESSING BLOCK LINE MEMORY DATA0N MIPI Tx INTERFACE 5 7 3V LDO 7 HORIZONTAL DRIVERS 3V OUT 3.4V IN 6 LD MASKING RG HL DATA1N LD ALIGNMENT LD1 TO LD7 CLKN DATA1P CLAMP TAL1 TO TAL5 CLKP 7 HCLK MASKING Precision Timing CORE CLI CLO INTERNAL SIGNALS H1 TO H5 5 V1 TO V8 (3-LEVEL) V9 TO V16 (2-LEVEL) 16 24 VERTICAL DRIVERS INTERNAL REGISTERS I2C_SDA I2C_SCL ISATG GPO1 TO GPO8 RST/SYNC 16467-001 8 Figure 1. For more information about the ADDI9036, contact Analog Devices, Inc., at afe.ccd@analog.com. Rev. Sp0 Document Feedback Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 (c)2018 Analog Devices, Inc. All rights reserved. Technical Support www.analog.com ADDI9036 Data Sheet NOTES (c)2018 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D16467F-0-11/18(Sp0) Rev. Sp0 | Page 2 of 2