Ordering number : ENN6517 DCD010 Silicon Epitaxial Planar Type DCD010 Diodes Features * Rectifier applications. Ideally suited for use in hybrid ICs because of very small-sized package. Small interterminal capacitance. unit : mm 1251A [DCD010] 0.4 Electrical Connection 3 1 : Anode 2 : Cathode 3 : Cathode / Anode 0 to 0.1 1 0.95 0.95 2 1.9 2.9 1 : Anode 2 : Cathode 3 : Cathode / Anode 2 0.8 1.1 1 0.16 1.5 2.5 3 0.5 * Package Dimensions 0.5 * SANYO : CP Specifications Absolute Maximum Ratings at Ta=25C Parameter Peak Reverse Voltage Reverse Voltage Peak Forward Current Average Rectified Current Surge Current Allowable Power Dissipation Junction Temperature Storage Temperature Symbol VRM VR IFM IO IFSM P Tj Tstg Conditions Ratings 20 20 200 100 300 200 125 --55 to +125 (1s) Unit V V mA mA mA mW C C Electrical Characteristics at Ta=25C Parameter Forward Voltage Reverse Current Interterminal Capacitance Note) VF and IR are values per element. C is the value for two elements. Symbol VF IR1 C Conditions min Ratings typ IF=10mA VR=15V VR=6V, f=1MHz max 1.0 0.1 4.0 Unit V A pF Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all SANYO products described or contained herein. SANYO Electric Semiconductor Co.,Ltd. Semiconductor Company SANYO Electric Co.,Ltd. Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN http://semicon.sanyo.com/en/network TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 42000 GI IM No.6517-1/2 DCD010 IF -- VF 0 0.4 0.8 10 7 5 3 2 C 75C 25C --25C 1.0 7 5 3 2 0.1 7 5 3 2 0.01 1.2 1.6 2.0 Forward Voltage, VF -- V 2.4 0 Allowable Power Dissipation, PD -- W D2 125C D1 100C 1.0 7 5 3 2 D2 100C 0.1 7 5 3 2 D1 75C D2 75C 0.8 1.6 1.2 Forward Voltage, VF -- V IT02092 PD -- Ta 0.3 D1 125C 10 7 5 3 2 0.4 IT02091 IR -- VR 100 7 5 3 2 D2 Ta=12 5 --25C 125 C 0.1 7 5 3 2 75C 25C 10 7 5 3 2 0.01 Reverse Current, IR -- mA Forward Current, IF -- mA D1+D2 1.0 7 5 3 2 IF -- VF 100 7 5 3 2 D1 Ta=125 C 75C 25C --25C Ta= Forward Current, IF -- mA 100 7 5 3 2 0.25 0.2 0.15 0.1 0.05 0 0.01 0 5 10 15 Reverse Voltage, VR -- V 20 IT02093 0 25 50 75 100 Ambient Temperature, Ta -- C 125 IT02094 Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 2000. Specifications and information herein are subject to change without notice. PS No.6517-2/2