IC Sockets XR2 OMRON's IC Connectors Have Excellent Reliability and Can Tolerate Momentary Interruptions in Power. * Round pins and 4-point (4-finger) contact construction with contact entry holes that are large for easy insertion. * IC lead contacts placed high for solid connections. * A wide product range: open-frame, closed-frame, singlerow, carrier-type DIP terminals, wrap terminals, soldersleeve terminals, and low-profile DIP terminals. * Conforms to UL standards (file no. E 103202) and CSA standards (file no. LR 62678). Construction Contact Dimensions Inner clip Base DIP Terminals 1.83 dia. Wrap Terminals Low-profile DIP Terminals 1.83 dia. Solder-sleeve Terminals 1.83 dia. 1.83 dia. Outer sleeve Carrier 1.35 dia. 0.79 dia. Inner clip 0.51 dia. 0.635 0.635 Outer sleeve Ratings and Characteristics Applicable Wrap Post Wire Sizes Item Rated current Rated voltage Contact resistance Insulation resistance Dielectric strength Contact insertion (See note.) Contact removal (See note.) Insertion durability AWG30, AWG28, AWG26, AWG24 (Solid wire: 0.25 to 0.51 mm dia.) Gold plated Gold flash plated 1A 300 VAC 20 m max. (at 20 mV, 100 mA max.) 1,000 M min. (at 500 VDC) 1,000 VAC for 1 min (leakage current: 1 mA max.) 400 gf (3.92 N) max. 3 wires Applicable IC Lead Dimensions 65 gf (0.64 N) min. with gold plating or with solder plating DIP, Wrap, and Solder-sleeve Terminals 100 times (0.75-m gold plating), 20 times 50 times (0.25-m gold plating) Ambient temperature Operating: -55 to 125C (with no icing) Note: The contact insertion force and contact removal force are for a test gauge, t = 0.432 mm. Materials and Finish Base Carrier Inner clip Outer sleeve Wrap Post Length Fiber-glass reinforced PBT resin (UL94V-0)/black Aluminum Beryllium copper/nickel base, gold plated Brass/nickel base, gold flash plating Depth x width (mm) Flat lead 0.29 0.09 x 0.46 0.08 (See note.) Round lead 0.53 dia. max. 0.41 dia. min. Note: Do not use wire where the diagonal is more than 0.56 mm. Low-profile DIP Terminals Depth x width (mm) Flat lead 0.29 0.09 x 0.46 0.08 (See note.) Round lead 0.50 dia. max. 0.41 dia. min. Note: Do not use wire where the diagonal is more than 0.52 mm. Note: For non-standard plating, contact your OMRON representative. IC Sockets XR2 111 XR2A Open-frame Sockets Dimensions XR2A-@@11-N XR2A-2463-N XR2A-2473-N XR2A-@@01-N XR2A-2461-N XR2A-2471-N XR2A-@@21-N XR2A-2467-N XR2A-2477-N (With DIP terminals) Dimensions No. of contacts Dimensions (mm) A 0.51 dia. 1.33 dia. DIP terminals XR2A-@@02 (With wrap terminals) 0.635 x 0.635 Wrap terminals Mounting holes (bottom view) 0.8 0.05 dia. (DIP terminals) 1.0 0.05 dia. (Wrap terminals) B 8 7.62 7.62 14 7.62 15.24 16 7.62 17.78 18 7.62 20.32 20 7.62 22.86 22 10.16 25.40 24 (See note 1.) 15.24 27.94 24 (See note 2.) 10.16 27.94 24 (See note 3.) 7.62 27.94 28 15.24 33.02 32 15.24 38.10 40 15.24 48.26 42 15.24 50.80 48 15.24 58.42 50 22.86 60.96 64 22.86 78.74 Note: 1. XR2A-2401-N/XR2A-2402/ XR2A-2411N/XR2A-2421-N 2. XR2A-2461-N/XR2A-2463-N/ XR2A-2467-N 3. XR2A-2471-N/XR2A-2473-N/ XR2A-2477-N Ordering Information Appearance No of contacts Row pitch (A) (mm) Sockets with DIP terminals With 0.25-m gold plating Sockets with wrap terminals With 0.75-m gold plating With gold flash plating With 0.75-m gold plating 8 7.62 XR2A-0811-N XR2A-0801-N XR2A-0821-N XR2A-0802 14 7.62 XR2A-1411-N XR2A-1401-N XR2A-1421-N XR2A-1402 16 7.62 XR2A-1611-N XR2A-1601-N XR2A-1621-N XR2A-1602 18 7.62 XR2A-1811-N XR2A-1801-N XR2A-1821-N XR2A-1802 20 7.62 XR2A-2011-N XR2A-2001-N XR2A-2021-N XR2A-2002 22 10.16 XR2A-2211-N XR2A-2201-N XR2A-2221-N XR2A-2202 24 15.24 XR2A-2411-N XR2A-2401-N XR2A-2421-N XR2A-2402 24 10.16 XR2A-2463-N XR2A-2461-N XR2A-2467-N -- 24 7.62 XR2A-2473-N XR2A-2471-N XR2A-2477-N XR2A-2472 28 15.24 XR2A-2811-N XR2A-2801-N XR2A-2821-N XR2A-2802 32 15.24 XR2A-3211-N XR2A-3201-N XR2A-3221-N XR2A-3202 40 15.24 XR2A-4011-N XR2A-4001-N XR2A-4021-N XR2A-4002 42 15.24 XR2A-4211-N XR2A-4201-N XR2A-4221-N XR2A-4202 48 15.24 XR2A-4811-N XR2A-4801-N -- XR2A-4802 50 22.86 XR2A-5011-N XR2A-5001-N -- -- 64 22.86 XR2A-6411-N XR2A-6401-N -- XR2A-6402 112 IC Sockets XR2 XR2A Open-frame Sockets (with Low-profile DIP Terminals) Dimensions Dimensions XR2A-@@15 XR2A-2466 XR2A-2476 XR2A-@@05 XR2A-2465 XR2A-2475 XR2A-@@25 XR2A-2468 XR2A-2478 (With low-profile DIP terminals) No. of contacts Dimensions (mm) A 0.79 dia. Mounting holes (bottom view) 0.9 0.05 dia. B 8 7.62 7.62 14 7.62 15.24 16 7.62 17.78 18 7.62 20.32 20 7.62 22.86 22 10.16 25.40 24 (See note 1.) 15.24 27.94 24 (See note 2.) 10.16 27.94 24 (See note 3.) 7.62 27.94 28 15.24 33.02 32 15.24 38.10 40 15.24 48.26 42 15.24 50.80 48 15.24 58.42 64 22.86 78.74 Note: 1. XR2A-2415/XR2A-2405/ XR2A-2425 2. XR2A-2466/XR2A-2465/ XR2A-2468 3. XR2A-2476/XR2A-2475/ XR2A-2478 Ordering Information Appearance No. of contacts Row pitch (A) (mm) Sockets with DIP terminals With 0.25-m gold plating With 0.75-m gold plating With gold flash plating 8 7.62 XR2A-0815 XR2A-0805 XR2A-0825 14 7.62 XR2A-1415 XR2A-1405 XR2A-1425 16 7.62 XR2A-1615 XR2A-1605 XR2A-1625 18 7.62 XR2A-1815 XR2A-1805 XR2A-1825 20 7.62 XR2A-2015 XR2A-2005 XR2A-2025 22 10.16 XR2A-2215 XR2A-2205 XR2A-2225 24 15.24 XR2A-2415 XR2A-2405 XR2A-2425 24 10.16 XR2A-2466 XR2A-2465 XR2A-2468 24 7.62 XR2A-2476 XR2A-2475 XR2A-2478 28 15.24 XR2A-2815 XR2A-2805 XR2A-2825 32 15.24 XR2A-3215 XR2A-3205 XR2A-3225 40 15.24 XR2A-4015 XR2A-4005 XR2A-4025 42 15.24 XR2A-4215 XR2A-4205 -- 48 15.24 XR2A-4815 XR2A-4805 -- 64 22.86 XR2A-6415 XR2A-6405 -- IC Sockets XR2 113 XR2B Closed-frame Sockets Dimensions XR2B-1611-N XR2B-1601-N Mounting holes (bottom view) 0.8 0.05 dia. (DIP terminals) 0.51 dia. 1.33 dia. XR2B-@@11-N XR2B-@@01-N Dimensions No. of contacts 0.51 dia. 1.33 dia. Ordering Information Appearance No. of contacts Row pitch (A) (mm) Sockets with DIP terminals With 0.25-m gold plating With 0.75-m gold plating 16 7.62 XR2B-1611-N XR2B-1601-N 24 15.24 XR2B-2411-N XR2B-2401-N 28 15.24 XR2B-2811-N XR2B-2801-N 32 15.24 XR2B-3211-N XR2B-3201-N 40 15.24 XR2B-4011-N XR2B-4001-N 114 IC Sockets XR2 Dimensions (mm) A B 16 7.62 17.78 24 15.24 27.94 28 15.24 33.02 32 15.24 38.10 40 15.24 48.26 XR2T Open-frame Sockets with Seal Tape * Equipped with seal tape to prevent flux cleaning liquids from entering the Socket. * The same round-pin, 4-point contact structure as the RX2A is used for the contacts. * The seal tape is made of transparent polyethyle (adhesive portion) and yellow polypropolyene (non-adhesive portion). Dimensions Dimensions XR2T-@@11-N XR2T-2463-N XR2T-2473-N XR2T-@@01-N XR2T-2461-N XR2T-2471-N XR2T-@@21-N XR2T-2467-N XR2T-2477-N No. of contacts Dimensions (mm) Adhesive side A Non-adhesive side Seal tape 0.51 dia. 1.33 dia. Mounting holes (bottom view) 0.8 0.05 dia. (DIP terminals) B 8 7.62 7.62 14 7.62 15.24 16 7.62 17.78 18 7.62 20.32 20 7.62 22.86 22 10.16 25.40 24 (See note 1.) 15.24 27.94 24 (See note 2.) 10.16 27.94 24 (See note 3.) 7.62 27.94 28 15.24 33.02 32 15.24 38.10 40 15.24 48.26 48 15.24 58.42 Note: 1. XR2T-2411-N/XR2T-2401-N/ XR2A-2421-N 2. XR2T-2463-N/XR2T-2461-N/ XR2T-2467-N 3. XR2T-2473-N/XR2T-2471-N/ XR2T-2477-N Ordering Information Appearance No. of contacts Row pitch (A) (mm) Sockets with DIP terminals With 0.25-m gold plating With 0.75-m gold plating With gold flash plating 8 7.62 XR2T-0811-N XR2T-0801-N XR2T-0821-N 14 7.62 XR2T-1411-N XR2T-1401-N XR2T-1421-N 16 7.62 XR2T-1611-N XR2T-1601-N XR2T-1621-N 18 7.62 XR2T-1811-N XR2T-1801-N XR2T-1821-N 20 7.62 XR2T-2011-N XR2T-2001-N XR2T-2021-N 22 10.16 XR2T-2211-N XR2T-2201-N XR2T-2221-N 24 15.24 XR2T-2411-N XR2T-2401-N XR2T-2421-N 24 10.16 XR2T-2463-N XR2T-2461-N XR2T-2467-N 24 7.62 XR2T-2473-N XR2T-2471-N XR2T-2477-N 28 15.24 XR2T-2811-N XR2T-2801-N XR2T-2821-N 32 15.24 XR2T-3211-N XR2T-3201-N XR2T-3221-N 40 15.24 XR2T-4011-N XR2T-4001-N XR2T-4021-N 48 15.24 XR2T-4811-N XR2T-4801-N --- IC Sockets XR2 115 XR2C Single-row Sockets Dimensions XR2C-@@11-N XR2C-@@01-N XR2C-@@21-N (With DIP terminals) 0.51 dia. 1.33 dia. Mounting holes (bottom view) XR2C-@@15 XR2C-@@05 XR2C-@@25 (With low-profile DIP terminals) 0.8 0.05 dia. (DIP terminals) 1.0 0.05 dia. (Wrap terminals 0.9 0.05 dia. (Low-profile DIP Dimensions 0.79 dia. No. of contacts XR2C-@@02 (With wrap terminals) A (mm) 20 48.26 32 78.74 0.64 x 0.64 Ordering Information Appearance No. of contacts Sockets with DIP terminals With 0.25-m gold plating With 0.75-m gold plating With gold flash plating 10 XR2C-1011-N -- -- 16 XR2C-1611-N -- -- 20 XR2C-2011-N XR2C-2001-N XR2C-2021-N 32 XR2C-3211-N XR2C-3201-N XR2C-3221-N Sockets with low-profile DIP terminals 20 XR2C-2015 XR2C-2005 XR2C-2025 32 XR2C-3215 XR2C-3205 XR2C-3225 20 -- XR2C-2002 -- 32 -- XR2C-3202 -- Sockets with wrap terminals 116 IC Sockets XR2 XR2H ZIP (Zigzag) Sockets Dimensions XR2H-@@11-N (With DIP terminals) Dimensions No. of contacts Dimensions (mm) A B 16 17.78 21.5 20 22.86 26.5 24 27.94 31.6 28 33.02 36.7 Mounting holes (bottom view) 0.8 0.05 dia. Ordering Information Appearance Sockets with DIP terminals No. of contacts With 0.25-m gold plating 16 XR2H-1611-N 20 XR2H-2011-N 24 XR2H-2411-N 28 XR2H-2811-N IC Sockets XR2 117 XR2P Single-row Round Pin Plugs Single-row Round Pins for Low-profile Stacking * Single row with 2.54-mm pitch. * Low-profile stacking possible in combination with Single-row IC Sockets (XR2C). * Easily divided into the desired number of contacts. Ratings and Characteristics Materials and Finish Rated current 1A Base Rated voltage 300 VAC Contact resistance (See note.) 20 m max. (at 20 mV, 10 mA max.) Insulation resistance 1,000 M min. (at 500 VDC) Dielectric strength 1,000 VAC for 1 min (leakage current: 1 mA max.) Applicable Sockets Ambient operating temperature -55 to 125C (with no icing at low temperature) XR2C-@@11-N IC Sockets (single row) XR2C-3215 IC Socket (single row, low profile) Fiber-glass reinforced PBT resin (UL94V-0)/black Contacts Mating end Terminal Brass/nickel base with 0.25-m gold plating Note: The contact and vibration resistance are the values when the Plug is mated with an XR2C. Dimensions XR2P-@@41 (With DIP straight terminals) Mounting holes (bottom view) Thirty-two, 0.8 0.05 dia. 1.8 dia. 0.45 dia. Dimensions 0.45 dia. Terminals (board side) Ordering Information No. of contacts Model 10 XR2P-1041 16 XR2P-1641 20 XR2P-2041 32 XR2P-3241 No. of contacts A (mm) 10 22.86 16 38.1 20 48.26 32 78.74 Mated Dimensions XR2P-@@41 with XR2C-@@11-N Single-row IC Socket XR2P-@@41 XR2P-3241 XR2C-3215 XR2C-@@11-N 118 XR2P-3241 with XR2C-3215 Single-row Low-profile IC Socket IC Sockets XR2 XR2P-3241 with XR2E-3204 Single-row Carrier Socket with Solder-sleeve Terminals XR2P-3241 XR2E-3204 Tools and Accessories XR2Z-13 XR2Z-11 IC Holder (made from PBT) Note: Order the following models in multiples of the minimum order. Model No. of IC Socket contacts IC socket width Order in multiples of XR2Z-11 14, 16, 18, 20, 24 7.62 m 100 XR2Z-13 24, 28, 32, 40, 42, 48 15.24 mm 500 Note: This Holder protects the IC from falling out due to shock. The IC will not fall out even with a 980 m/s2 shock. Applicable IC height: 2.7 to 5.6 mm. XY2C-0101 XY2C-0103 IC Removal Tool Model No. of IC Socket contacts IC socket width XY2C-0101 14, 16, 18, 20 7.62 m XY2C-0103 24, 28, 32, 40 15.24 mm Precautions Correct Use Soldering * When soldering, make sure that the outer sleeve of the IC Socket does not stick out of the circuit board through-holes. * Make sure that no flux enters the IC Socket from the top. Removing ICs * Use the XY2C-0101 or XY2C-0103 IC Removal Tool to remove ICs. * Do not use a screwdriver to remove the IC. It may damage the circuit board. * Do not use a testing rod or check pin to check contacts or circuits. This may damage the inner clips or plating and may lead to improper contact. * Four-point contact construction is used for plated products to make them more tolerant of momentary power interruptions. We recommend using gold-plated contacts in areas subject to vibration and shock. Automated Soldering Conditions (Jet Flow) Applicable IC Lead Dimensions 1. Use leads that are within the range shown here. For details, refer to the first page of this datasheet. Use an IC with leads longer than 3 mm. If the leads are too long, the IC will not sit flush on the board. 2. Use an IC with tapered leads for easy insertion, a minimum amount of bending, and minimum damage to the leads. NG OK OK 1. Soldering temperature: 2505C 2. Continuous soldering time: Within 5 s IC Sockets XR2 119 All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ON-LINE OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 Global - http://www.omron.com USA - http://www.components.omron.com 847-882-2288 08/12 Cat. No. X304-E-1a IC Sockets XR2 Specifications subject to change without notice Printed in USA Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Omron: XR2A-0825 XR2A-1425 XR2A-1625 XR2A-2025 XR2C-2015 XR2T-1621-N XR2T-2021-N XR2A-0802 XR2A1401-N XR2A-1801-N XR2A-2001-N XR2A-2401-N XR2A-2801-N XR2A-2811-N XR2A-2815 XR2A-3201-N XR2A-3211-N XR2A-4001-N XR2C-1511-N XR2C-2000-HSG XR2C-2002 XR2C-2005 XR2C-2011-N XR2C-3200HSG XR2C-3205 XR2H-1611-N XR2P-1541 XR2P-3241 XR2Z-13 XR2A-0811-N XR2A-1411-N XR2A-1611-N XR2A-2411-N XR2A-4011-N XR2C-1611-N XR2P-1641 XR2A-3211-NZ XR2C-0311-N XR2C-1501-N XR2A-2201N XR2C-1011-N XR2P-1041 XR2P-2041 XR2T-2401-N XR2T-2411-N XR2T-2421-N XR2C-2611-N XR2C-3211-N XR2C-3215 XR2A-3221-N