GOLONE LCD & LCM MAX:12.0mm for LED BL SGL- VCM240128 12.0(MAX) 144.0 0.3 138.0 0.4 133.2 0.3 *Display Format 240X128 Dots *Driving Method 1 / 128duty 5.0 114.0 0.3 *LCD Type Yellow or Gray STN 240x128 97.0 0.1 79.8 0.3 64.0 0.3 104.0 0 49.0 0.1 45.5 0.1 *Back Light LED/4.2VDC EL/100VAC,400Hz 1 DOTS 10 2.5 P2.54X17=43.18 1.6 4- 3.0 10.0 0.05 0.05 4.0 0.40 Electro-Optical Characteristics Symbol Condition Item Supply Voltage Logic Vdd - LCD Drive Vdd-Vee Input Voltage "H" level "L" level Frame Frequency Logic Current Consumption LCD Drive ViH ViL f FLM ldd lee LCD Drive Voltage I/O Connection (Vss=OV) Vdd=5V +_ 5% Vdd=5V Vdd=5V Vee-Vss=13.6V Min Typ. Max. Unit 4.75 5.0 5.25 - - 17.0 0.8Vdd - Vdd 0 - 0.2Vdd 75 80 70 - 13.8 23.0 f FLM=75Hz - 1.9 3.5 Ta=-10 =0 0 =0 0 - - - V V Hz mA 1 FG Frame Ground(Connected To Metal Bezel) 2 Vss Signal Ground 3 Vdd Power Supply for LCD 4 Vee Power Supply for LCD Drive 5 WR Data Write(Write Data to the Mondule at "L") 6 RD Data Read(Read Data from the Module at "L") 7 CE Chip Enable for The Module(Active at "L") 8 C/D 9 RESET Ta=25 (Recommend Voltage) Vdd-Vee =0 0 =0 0 - 15 - - - - V 10 Ta=50 =0 0 Response Time Rise Time Tr Decay Time Td Viewing Angle Contrast Ratio K =0 0 - 150 200 - 200 250 =0 0 40 - - =90 0 40 - - 2.0 3.0 - Ta=25 =0 0 =0 0 =0 0 =0 0 Function Pin No. Symbol 18 ms deg - Note 1)Duty=1/128 Note 2)All Dots on State 20 WR="L" :C/D="H" :Command,C/D="L" :Data Write WR="H" :C/D="H" :Command,C/D="L" :Data Read 17 D0 FS Controller Reset(Module Reset) D7 Data Line Font Select:Open or Connect to Vdd:6 8Dots Font Connect to Vss :8 8Dots Font