SPEC NO: DSAI6419 REV NO: V.4 DATE: JUN/15/2011 PAGE: 1 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1203007538
1.6X0.8mm SMD CHIP LED LAMP
Part Number: APT1608SYCK-AMT
Super Bright Yellow
Package Dimensions
Applications
zTraffic signaling.
zBacklighting (illuminated advertising , general lighting).
zInterior and exterior automotive lighting.
zSubstitution of micro incandescent lamps.
zReading lamps.
zSignal and symbol luminaire for orientation.
zMarker lights (e.g. Steps, exit ways, etc).
zDecorative and entertainment lighting.
zIndoor and outdoor commercial and residential
architectural lighting.
Description
The Super Bright Yellow device is made with AlGaInP
(on GaAs substrate) light emitting diode chip.
Features
zHigh reliability LED package.
z1.6mmx0.8mm SMT LED,0.75mm thickness
zLow power consumption.
zWide viewing angle.
zIdeal for backlight and indicator.
zVarious colors and lens types available.
zPackage: 2000pcs / reel .
zMoisture sensitivity level : level 3.
zRoHS compliant.
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.1(0.004") unless otherwise noted.
3. The specifications, characteristics and technical data described in the datasheet are subject to change without notice.
4. The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAI6419 REV NO: V.4 DATE: JUN/15/2011 PAGE: 2 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1203007538
Selection Guide
Part No. Dice Lens Type
Iv (mcd) [2]
@ 20mA
V
iewing
Angle [1]
Code. Min. Max. 2θ1/2
APT1608SYCK-AMT Super Bright Yellow (AlGaInP) Water Clear
M 80 120
120°
N 120 200
P 200 300
Parameter Symbol Value Unit
Power dissipation PD 75 mW
Reverse Voltage VR 5 V
Junction temperature TJ 120 °C
Operating Temperature Top -40 To +10 0 °C
Storage Temperature Ts tg -40 To + 1 2 0 °C
DC Forward Current[1] IF 30 mA
Peak Forward Current [2] IFM 175 mA
Electrostatic Discharge Threshold (HBM) 3000 V
Thermal Resistance (Junction/ambient) [1] Rth j-a 350 °C/W
Notes:
1.The dominant Wavelength (λ d) above is the setup value of the sorting machine. (Tolerance λ d : ±1nm. )
2. Forward Voltage: +/-0.1V.
Electrical / Optical Characteristics at Ta=25°C
Notes:
1. Rth(j-a) Results from mounting on PC board FR4 (pad size16 mm2 per pad),
2. 1/10 Duty Cycle, 0.1ms Pulse Width.
Absolute Maximum Ratings at Ta=25°C
Parameter Symbol
Value
Unit
Code. Min. Typ. Max.
Wavelength at peak emission IF=20mA λpeak 590 nm
Dominant Wavelength IF=20mA λ dom [1]
2 584 586
nm
3 586 588
4 588 590
5 590 592
Spectral bandwidth at 50%ΦREL MAX IF=20mA Δλ 20 nm
Forward Voltage IF=20mA VF [2] 2.0 2.5 V
Reverse Current (VR = 5V) IR 10 uA
Temperature coefficient of λpeak
IF=20mA, -10 °C T100 °C TC λpeak 0.13 nm/°C
Temperature coefficient of λdom
IF=20mA, -10 °C T100 °C TC λdom 0.04 nm/°C
Temperature coefficient of VF
IF=20mA, -10 °C T100 °C TCV -1.9 mV/°C
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.
2. Luminous intensity/ luminous Flux: +/-15%.
SPEC NO: DSAI6419 REV NO: V.4 DATE: JUN/15/2011 PAGE: 3 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1203007538
Super Bright Yellow APT1608SYCK-AMT
SPEC NO: DSAI6419 REV NO: V.4 DATE: JUN/15/2011 PAGE: 4 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1203007538
APT1608SYCK-AMT
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
Reel Dimension
Reflow soldering is recommended and the soldering profile is shown below.
Other soldering methods are not recommended as they might cause damage to the product.
SPEC NO: DSAI6419 REV NO: V.4 DATE: JUN/15/2011 PAGE: 5 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1203007538
PACKING & LABEL SPECIFICATIONS APT1608SYCK-AMT
SPEC NO: DSAI6419 REV NO: V.4 DATE: JUN/15/2011 PAGE: 6 OF 6
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: C.H.HAN ERP: 1203007538
Reliability Test Items And Conditions
The reliability of products shall be satisfied with items listed below
Lot Tolerance Percent Defective (LTPD) : 10%
No. Test Item Standards Test Condition Test Times /
Cycles
Number of
Damaged
1 Continuous operating test - Ta =25°C ,IF = maximum rated current* 1,000 h 0 / 22
2 High Temp. operating test EIAJ ED-
4701/100(101) Ta = 100°C IF = maximum rated current* 1,000 h 0 / 22
3 Low Temp. operating test - Ta = -40°C, IF = maximum rated current* 1,000 h 0 / 22
4 High temp. storage test EIAJ ED-
4701/100(201) Ta = maximum rated storage temperature 1,000 h 0 / 22
5 Low temp. storage test EIAJ ED-
4701/100(202) Ta = -40°C 1,000 h 0 / 22
6 High temp. & humidity storage test EIAJ ED-
4701/100(103) Ta = 60°C, RH = 90% 1,000 h 0 / 22
7 High temp. & humidity operating test EIAJ ED-
4701/100(102)
Ta = 60°C, RH = 90%
IF = maximum rated current* 1,000 h 0 / 22
8 Soldering reliability test EIAJ ED-
4701/100(301)
Moisture soak : 30°C,70% RH, 72h
Preheat : 150~180°C(120s max.)
Soldering temp : 260°C(10s)
3 times 0 / 18
9 Thermal shock operating test - Ta = -40°C(15min) ~ 100°C(15min)
IF = derated current at 100°C 1,000 cycles 0 / 22
10 Thermal shock test - Ta = -40°C(15min) ~ maximum rated
storage temperature(15min) 1,000 cycles 0 / 22
11 Electric Static Discharge (ESD) EIAJ ED-
4701/100(304) C = 100pF , R2 = 1.5K V = 3000V Once each
Polarity 0 / 22
12 Vibration test - a = 196m/s² , f = 100~2KHz ,
t = 48min for all xyz axes 4 times 0 / 22
* : Refer to forward current vs. derating curve diagram
Items Symbols Conditions Failure Criteria
luminous Intensity lv IF = 20mA Testing Min. Value <Spec.Min.Value x 0.5
Forward Voltage VF IF = 20mA Testing Max. Value Spec.Max.Value x 1.2
Reverse Current IR VR = Maximum Rated Reverse Voltage Testing Max. Value Spec.Max.Value x 2.5
High temp. storage test - - Occurrence of notable decoloration, deformation
and cracking
Failure Criteria