Web page Tools & software Sample & buy Support & FAQ Document 349-1 Shielded Power Inductor - SER2000 * Designed for high current power supply applications * Flat wire windings provide exceptionally low DCR * Isat ratings as high as 100 A Designer's Kit C374 contains 2 each of nine parts. Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Ambient temperature -40C to +85C with (40C rise) Irms current. Maximum part temperature +125C (ambient + temp rise). Derating. Storage temperature Component: -40C to +125C. Tape and reel packaging: -40C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. Recommended Land Pattern 0.290 7,37 0.755 0.02 19,18 0,51 0.160 4,06 SER20xx-xxxL XXXX Y 0.736 0.034 18,70 0,86 0.365 0.02 9,27 0,51 1 3 2 0.470 11,94 CL 0.015 0,38 Internal code 0.311 0.015 7,90 0,38 1 +0.004 0.098 -0.008 0.150 3,81 +0,10 2,5 -0,20 0.185 4,70 2 0.260 6,60 0.210 5,33 0.150 3,81 Maximum height SER2009 SER2010 SER2011 SER2012 SER2013 SER2014 Height (See table) 0.34 / 8,64 0.37 / 9,40 0.42 / 10,67 0.47 / 11,94 0.51 / 12,95 0.55 / 13,97 Weight 6.65 - 6.89 g 7.46 - 7.90 g 8.63 - 9.08 g 9.92 - 10.3 g 10.8 - 11.4 g 11.7 - 12.4 g 0.004/0,102 0.130* 3,30 0.125 3,18 *Width of flat area on winding Packaging SER2009 200 per 13 reel; SER2010 200 per 13 reel; SER2011 170 per 13 reel; SER2012 150 per 13 reel; SER2013 150 per 13 reel; SER2014 125 per 13 reel; 3 Caution: Terminal 3 is provided for mounting stability only. This terminal is connected to the winding of the inductor and must not be connected to ground or any circuitry. Plastic tape: 44 mm Plastic tape: 44 mm Plastic tape: 44 mm Plastic tape: 44 mm Plastic tape: 44 mm Plastic tape: 44 mm 0.5150.015 13,08 0,37 0.100 2,54 Dimensions are in inches mm wide, 0.4 mm thick, 32 mm pocket spacing, 9.25 pocket depth wide, 0.4 mm thick, 32 mm pocket spacing, 10.5 pocket depth wide, 0.4 mm thick, 32 mm pocket spacing, 11.6 pocket depth wide, 0.4 mm thick, 32 mm pocket spacing, 13.0 pocket depth wide, 0.5 mm thick, 32 mm pocket spacing, 14.0 pocket depth wide, 0.5 mm thick, 32 mm pocket spacing, 15.0 pocket depth US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 349-1 Revised 06/04/18 (c) Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 349-2 Shielded Power Inductors - SER2000 Series 6 1. Please specify termination and packaging codes: SER2014-202MLD Termination: L = RoHS compliant tin-silver over copper. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13 machine-ready reel. EIA-481 embossed plastic tape. B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. 2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4263B LCR meter or equivalent. 3. DCR measured on a Keithley 580 micro-ohmmeter. 4. SRF measured using an Agilent/HP 4395A network analyzer and an Agilent/HP 16092A test fixture. 5. DC current at 25C that causes a 10% (typ) inductance drop from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. When Irms is greater than Isat, Isat is the more critical specification, and Irms is shown in gray type. See Temperature Rise vs Current curve below. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Temperature Rise vs Current 70 60 SE R2 014 SE R2 013 SE R2 012 SE R2 01 1 SE R2 01 0 SE R2 00 9 Irms (A) DCR SRF max3 typ4 Isat5 20C 40C Height (m) (MHz) (A) rise rise (mm) 0.740 550 100 41 54 8,64 1.00 182 100 36 45 9,40 0.740 544 60 41 54 8,64 1.00 148 81 36 45 9,40 1.34 161 100 30 40 10,67 0.740 648 49 41 54 8,64 1.00 115 70 36 45 9,40 1.34 124 90 30 40 10,67 1.60 115 97 25 35 11,94 0.740 454 45 41 54 8,64 1.00 136 62 36 45 9,40 1.34 135 78 30 40 10,67 1.60 103 85 25 35 11,94 1.82 104 98 23 30 12,95 0.740 567 38 41 54 8,64 1.00 92 53 36 45 9,40 1.34 113 70 30 40 10,67 1.60 91 75 25 35 11,94 1.82 93 85 23 30 12,95 2.15 104 98 21 27 13,97 0.740 557 33 41 54 8,64 1.00 96 48 36 45 9,40 1.34 104 62 30 40 10,67 1.60 85 69 25 35 11,94 1.82 98 73 23 30 12,95 2.15 102 87 21 27 13,97 0.740 488 29 41 54 8,64 1.00 81 42 36 45 9,40 1.34 97 56 30 40 10,67 1.60 75 64 25 35 11,94 1.82 98 68 23 30 12,95 2.15 88 70 21 27 2713,97 0.740 81 28 41 54 8,64 1.00 69 37 36 45 9,40 1.34 81 49 30 40 10,67 1.60 73 54 25 35 11,94 1.82 82 58 23 30 12,95 2.15 78 63 21 27 13,97 0.740 40 16 41 54 8,64 1.00 48 27 36 45 9,40 1.34 56 37 30 40 10,67 1.60 51 35 25 35 11,94 1.82 61 40 23 30 12,95 2.15 62 45 21 27 13,97 1.82 38 25 23 30 12,95 1.82 35 20 23 30 12,95 2.15 36 25 21 27 13,97 1.82 30 18 23 30 12,95 Temperature rise (from 25C) Inductance DCR 20%2 typ3 Part number1 (H) (m) SER2009-301ML_ 0.30 0.630 SER2010-301ML_ 0.30 0.900 SER2009-501ML_ 0.50 0.630 SER2010-501ML_ 0.50 0.900 SER2011-501ML_ 0.50 1.20 SER2009-601ML_ 0.60 0.630 SER2010-601ML_ 0.60 0.900 SER2011-601ML_ 0.60 1.20 SER2012-601ML_ 0.60 1.44 SER2009-681ML_ 0.68 0.630 SER2010-681ML_ 0.68 0.900 SER2011-681ML_ 0.68 1.20 SER2012-681ML_ 0.68 1.44 SER2013-681ML_ 0.68 1.70 SER2009-801ML_ 0.80 0.630 SER2010-801ML_ 0.80 0.900 SER2011-801ML_ 0.80 1.20 SER2012-801ML_ 0.80 1.44 SER2013-801ML_ 0.80 1.70 SER2014-801ML_ 0.80 1.94 SER2009-901ML_ 0.90 0.630 SER2010-901ML_ 0.90 0.900 SER2011-901ML_ 0.90 1.20 SER2012-901ML_ 0.90 1.44 SER2013-901ML_ 0.90 1.70 SER2014-901ML_ 0.90 1.94 SER2009-102ML_ 1.0 0.630 SER2010-102ML_ 1.0 0.900 SER2011-102ML_ 1.0 1.20 SER2012-102ML_ 1.0 1.44 SER2013-102ML_ 1.0 1.70 SER2014-102ML_ 1.0 1.94 SER2009-122ML_ 1.2 0.630 SER2010-122ML_ 1.2 0.900 SER2011-122ML_ 1.2 1.20 SER2012-122ML_ 1.2 1.44 SER2013-122ML_ 1.2 1.70 SER2014-122ML_ 1.2 1.94 SER2009-202ML_ 2.0 0.630 SER2010-202ML_ 2.0 0.900 SER2011-202ML_ 2.0 1.20 SER2012-202ML_ 2.0 1.44 SER2013-202ML_ 2.0 1.70 SER2014-202ML_ 2.0 1.94 SER2013-362ML_ 3.6 1.70 SER2013-402ML_ 4.0 1.70 SER2014-402ML_ 4.0 1.94 SER2013-472ML_ 4.7 1.70 50 40 30 20 10 0 0 10 20 30 40 50 60 70 Current (A rms) Parts shown in bold are included in Coilcraft Designer's Kit C374. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 349-2 Revised 06/04/18 (c) Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 349-3 Shielded Power Inductors - SER2000 Series 10.0 8.0 6.0 10.0 8.0 6.0 4.0 4.0 2.0 2.0 H 1.0 0.8 1.2 H 1.0 H 0.9 H 0.8 H 0.68 H 0.6 H 0.5 H 0.6 0.4 Inductance (H) Inductance (H) L vs Frequency 2.0 H 2.0 1.2 H 1.0 H 0.9 H 0.8 H 0.68 H 0.6 H 1.0 0.8 0.6 0.4 0.3 H 0.2 0.1 0.2 SER2009 0.1 1 10 0.1 100 SER2012 0.1 1 10 100 Frequency (MHz) 10.0 8.0 6.0 10.0 8.0 6.0 4.7 H 4.0 4.0 3.6 H 2.0 2.0 H 1.0 0.8 1.2 H 1.0 H 0.9 H 0.8 H 0.68 H Inductance (H) Inductance (H) Frequency (MHz) 2.0 H 2.0 1.2 H 1.0 H 0.9 H 0.8 H 0.68 H 0.6 H 0.5 H 1.0 0.8 0.6 0.4 0.6 0.4 0.3 H 0.2 0.1 0.2 SER2010 0.1 1 10 0.1 100 SER2013 0.1 1 10 100 Frequency (MHz) 10.0 8.0 6.0 10.0 8.0 6.0 4.0 4.0 4.0 H 2.0 2.0 H Inductance (H) Inductance (H) Frequency (MHz) 2.0 H 2.0 1.2 H 1.0 H 0.9 H 0.8 H 0.68 H 0.6 H 0.5 H 1.0 0.8 0.6 0.4 0.2 0.1 1.2 H 1.0 H 0.9 H 0.8 H 1.0 0.8 0.6 0.4 0.2 SER2011 0.1 1 10 100 0.1 SER2014 0.1 Frequency (MHz) US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg 1 10 100 Frequency (MHz) Document 349-2 Revised 06/04/18 (c) Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 349-4 Shielded Power Inductors - SER2000 Series 10.0 8.0 6.0 10.0 8.0 6.0 4.0 4.0 2.0 H 2.0 Inductance (H) Inductance (H) L vs Current 1.2 H 1.0 0.8 0.6 0.4 0.2 0.1 1.0 H 0.90 H 0.80 H 0.68 H 0.60 H 0.50 H 0.30 H SER2009 0.1 10 1 2.0 H 2.0 1.2 H 1.0 0.8 0.6 1.0 H 0.4 0.1 100 4.0 4.0 2.0 H Inductance (H) Inductance (H) 10.0 8.0 6.0 1.2 H 1.0 0.8 0.6 0.4 0.1 1.0 H 0.90 H 0.80 H 0.68 H 0.60 H 0.50 H 0.30 H SER2010 0.1 10 1 10 1 3.6 H 2.0 H 1.2 H 1.0 0.8 0.6 1.0 H 0.4 0.1 100 2.0 H Inductance (H) Inductance (H) 4.0 1.2 H 1.0 0.8 0.6 0.2 0.1 0.68 H 0.60 H 10 1 0.68 H SER2013 0.1 10 1 100 4.0 H 2.0 H 2.0 1.2 H 1.0 0.8 0.6 1.0 H 0.4 0.90 H 0.80 H 0.2 0.50 H SER2011 0.1 0.80 H Current (A) 4.0 0.80 H 0.90 H 0.2 10.0 8.0 6.0 1.0 H 0.90 H 100 4.7 H 2.0 10.0 8.0 6.0 0.4 0.60 H SER2012 0.1 Current (A) 2.0 0.68 H Current (A) 10.0 8.0 6.0 0.2 0.80 H 0.2 Current (A) 2.0 0.90 H 100 0.1 SER2014 0.1 Current (A) US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg 10 100 Document 349-2 Revised 06/04/18 1 Current (A) (c) Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: SER2013-362MLD SER2014-202MLD SER2010-901MLB SER2009-301MLD SER2010-681MLD SER2014202MLB SER2011-901MLB SER2012-202MLB SER2013-202MLB SER2011-801MLD SER2014-402MLB SER2009-122MLB SER2010-301MLB SER2010-202MLB SER2012-601MLB SER2011-122MLD SER2014-122MLD SER2013-102MLB SER2014-122MLB SER2009-501MLD SER2009-601MLD SER2009-801MLB SER2010601MLB SER2013-901MLB SER2011-501MLB SER2012-122MLD SER2013-681MLD SER2009-501MLB SER2010-122MLB SER2013-472MLB SER2014-801MLB SER2010-501MLB SER2013-122MLB SER2009-301MLB SER2009-102MLB SER2012-901MLB SER2009-901MLD SER2011-601MLD SER2010-601MLD SER2010202MLD SER2013-202MLD SER2011-901MLD SER2011-801MLB SER2009-122MLD SER2012-681MLD SER2014-901MLD SER2009-102MLD SER2014-801MLD SER2013-681MLB SER2010-901MLD SER2010-102MLD SER2010-122MLD SER2012-601MLD SER2014-402MLD SER2009-901MLB SER2013-801MLB SER2011501MLD SER2013-472MLD SER2012-122MLB SER2011-601MLB SER2012-801MLB SER2010-301MLD SER2010-501MLD SER2012-202MLD SER2009-202MLB SER2013-102MLD SER2014-901MLB SER2009-202MLD SER2009-801MLD SER2012-801MLD SER2013-402MLD SER2012-102MLB SER2013-362MLB SER2009601MLB SER2014-102MLB SER2011-102MLB SER2013-122MLD SER2014-102MLD SER2009-681MLB SER2012-681MLB SER2011-681MLB SER2010-801MLD SER2011-681MLD SER2010-801MLB SER2009-681MLD SER2012-901MLD SER2013-901MLD SER2013-801MLD SER2011-122MLB SER2010-681MLB SER2011202MLB SER2013-402MLB SER2010-102MLB SER2011-202MLD SER2011-102MLD SER2012-102MLD