US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
0.755 ±0.02
19,18 ±0,51
0.736 ±0.034
18,70 ±0,86
Recommended Land Pattern
0.185
4,70
0.210
5,33
0.365 ±0.02
9,27 ±0,51
Internal code
0.160
4,06
0.470
11,94
12
3
Height
(See table)
0.004/0,102
0.290
7,37
0.015
0,38
0.150
3,81
0.098
2,5
0.100
2,54
0.125
3,18
0.311 ±0.015
7,90 ±0,38
0.515±0.015
13,08 ±0,37
0.130
3,30 *
0.150
3,81
0.260
6,60
C
L
*
Width of flat area on winding Dimensions are in inches
mm
SER20xx-xxxL
XXXX Y
Maximum
height Weight
SER2009 0.34 / 8,64 6.65 – 6.89 g
SER2010 0.37
SER2011 0.42
SER2012 0.47
SER2013 0.51
SER2014 0.55
/ 9,40 7.46 – 7.90 g
/ 10,67 8.63 – 9.08 g
/ 11,94 9.92 – 10.3 g
/ 12,95 10.8 – 11.4 g
/ 13,97 11.7 – 12.4 g
+0.004
–0.008
+0,10
–0,20
Document 349-1 Revised 06/04/18
Shielded Power Inductor
–
SER2000
Document 349-1
1
2
3
Caution:
Te
rminal 3 is provided for mounting
stability only
. This ter
minal is connected
to the winding of the inductor and m
ust
not be connected to ground or an
y
circuitry.
Packaging
SER2009 200 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 9.25 pocket depth
SER2010 200 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 10.5 pocket depth
SER2011 170 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 11.6 pocket depth
SER2012 150 per 13″ reel; Plastic tape: 44 mm wide, 0.4 mm thick, 32 mm pocket spacing, 13.0 pocket depth
SER2013 150 per 13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 14.0 pocket depth
SER2014 125 per 13″ reel; Plastic tape: 44 mm wide, 0.5 mm thick, 32 mm pocket spacing, 15.0 pocket depth
Designer’s Kit C374 contains 2 each of nine parts.
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Ambient temperature –40°C to +85°C with (40°C rise) Irms current.
Maximum part temperature +125°C (ambient + temp rise). Derating.
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
• Designed for high current power supply applications
• Flat wire windings provide exceptionally low DCR
• Isat ratings as high as 100 A
Sample
& buy
Support
& FAQ
Web
page
Tools &
softw
are
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded Power Inductors
–
SER2000 Series
Document 349-2 Revised 06/04/18
Document 349-2
Inductance
DCR DCR SRF
Irms (A)6
±20%2 typ3 max3 typ4 Isat5 20°C 40°C Height
Part number1 (µH) (m) (m) (MHz) (A) rise rise (mm)
SER2009-301ML_ 0.30 0.630 0.740 550 100 41 54 8,64
SER2010-301ML_ 0.30 0.900 1.00 182 100 36 45 9,40
SER2009-501ML_ 0.50 0.630 0.740 544 60 41 54 8,64
SER2010-501ML_ 0.50 0.900 1.00 148 81 36 45 9,40
SER2011-501ML_ 0.50 1.20 1.34 161 100 30 40 10,67
SER2009-601ML_ 0.60 0.630 0.740 648 49 41 54 8,64
SER2010-601ML_ 0.60 0.900 1.00 115 70 36 45 9,40
SER2011-601ML_ 0.60 1.20 1.34 124 90 30 40 10,67
SER2012-601ML_ 0.60 1.44 1.60 115 97 25 35 11,94
SER2009-681ML_ 0.68 0.630 0.740 454 45 41 54 8,64
SER2010-681ML_ 0.68 0.900 1.00 136 62 36 45 9,40
SER2011-681ML_ 0.68 1.20 1.34 135 78 30 40 10,67
SER2012-681ML_ 0.68 1.44 1.60 103 85 25 35 11,94
SER2013-681ML_ 0.68 1.70 1.82 104 98 23 30 12,95
SER2009-801ML_ 0.80 0.630 0.740 567 38 41 54 8,64
SER2010-801ML_ 0.80 0.900 1.00 92 53 36 45 9,40
SER2011-801ML_ 0.80 1.20 1.34 113 70 30 40 10,67
SER2012-801ML_ 0.80 1.44 1.60 91 75 25 35 11,94
SER2013-801ML_ 0.80 1.70 1.82 93 85 23 30 12,95
SER2014-801ML_ 0.80 1.94 2.15 104 98 21 27 13,97
SER2009-901ML_ 0.90 0.630 0.740 557 33 41 54 8,64
SER2010-901ML_ 0.90 0.900 1.00 96 48 36 45 9,40
SER2011-901ML_ 0.90 1.20 1.34 104 62 30 40 10,67
SER2012-901ML_ 0.90 1.44 1.60 85 69 25 35 11,94
SER2013-901ML_ 0.90 1.70 1.82 98 73 23 30 12,95
SER2014-901ML_ 0.90 1.94 2.15 102 87 21 27 13,97
SER2009-102ML_ 1.0 0.630 0.740 488 29 41 54 8,64
SER2010-102ML_ 1.0 0.900 1.00 81 42 36 45 9,40
SER2011-102ML_ 1.0 1.20 1.34 97 56 30 40 10,67
SER2012-102ML_ 1.0 1.44 1.60 75 64 25 35 11,94
SER2013-102ML_ 1.0 1.70 1.82 98 68 23 30 12,95
SER2014-102ML_ 1.0 1.94 2.15 88 70 21 27 2713,97
SER2009-122ML_ 1.2 0.630 0.740 81 28 41 54 8,64
SER2010-122ML_ 1.2 0.900 1.00 69 37 36 45 9,40
SER2011-122ML_ 1.2 1.20 1.34 81 49 30 40 10,67
SER2012-122ML_ 1.2 1.44 1.60 73 54 25 35 11,94
SER2013-122ML_ 1.2 1.70 1.82 82 58 23 30 12,95
SER2014-122ML_ 1.2 1.94 2.15 78 63 21 27 13,97
SER2009-202ML_ 2.0 0.630 0.740 40 16 41 54 8,64
SER2010-202ML_ 2.0 0.900 1.00 48 27 36 45 9,40
SER2011-202ML_ 2.0 1.20 1.34 56 37 30 40 10,67
SER2012-202ML_ 2.0 1.44 1.60 51 35 25 35 11,94
SER2013-202ML_ 2.0 1.70 1.82 61 40 23 30 12,95
SER2014-202ML_ 2.0 1.94 2.15 62 45 21 27 13,97
SER2013-362ML_ 3.6 1.70 1.82 38 25 23 30 12,95
SER2013-402ML_ 4.0 1.70 1.82 35 20 23 30 12,95
SER2014-402ML_ 4.0 1.94 2.15 36 25 21 27 13,97
SER2013-472ML_ 4.7 1.70 1.82 30 18 23 30 12,95
Parts shown in bold are included in Coilcraft Designer’s Kit C374.
1. Please specify termination and packaging codes:
SER2014-202MLD
Termination: L = RoHS compliant tin-silver over copper.
Special order:
T = RoHS tin-silver-copper
(95.5/4/0.5) or S = non-RoHS tin-lead
(63/37).
Packaging: D = 13″ machine-ready reel. EIA-481
embossed plastic tape.
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter D instead.
2. Inductance measured at 100 kHz, 0.1 Vrms, 0 Adc on an
Agilent/HP 4263B LCR meter or equivalent.
3. DCR measured on a Keithley 580 micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A network
analyzer and an Agilent/HP 16092A test fixture.
5. DC current at 25°C that causes a 10% (typ) inductance
drop from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from
25°C ambient. This information is for reference only and
does not represent absolute maximum ratings.
Click for temperature derating information. When Irms is
greater than Isat, Isat is the more critical specification,
and Irms is shown in gray type. See Temperature Rise
vs Current curve below.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
70
60
50
40
30
20
0
10
Temperature rise (from 25°C)
Current (A rms)
100304020 50 60
70
SER2009
SER2010
SER2011
SER2012
SER2013
SER2014
Temperature Rise vs Current
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded Power Inductors
–
SER2000 Series
Document 349-2 Revised 06/04/18
L vs Frequency
Document 349-3
0.1 1 10010
Inductance (µH)
Frequency (MHz)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
0.3 µH
1.2 µH
2.0 µH
0.5 µH
0.6 µH
0.8 µH
0.9 µH
1.0 µH
0.68 µH
0.1 1 10010
Inductance (µH)
Frequency (MHz)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
2.0 µH
0.3 µH
0.5 µH
0.6 µH
0.68 µH
0.8 µH
0.9 µH
1.0 µH
1.2 µH
0.1 1 10010
Inductance (µH)
Frequency (MHz)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
2.0 µH
0.5 µH
0.6 µH
0.68 µH
0.8 µH
0.9 µH
1.0 µH
1.2 µH
0.1 1 10010
Inductance (µH)
Frequency (MHz)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
2.0 µH
0.6 µH
0.68 µH
0.8 µH
0.9 µH
1.0 µH
1.2 µH
0.1 1 10010
Inductance (µH)
Frequency (MHz)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
0.68 µH
0.8 µH
0.9 µH
1.0 µH
1.2 µH
4.7 µH
3.6 µH
2.0 µH
0.1 1 10010
Inductance (µH)
Frequency (MHz)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
2.0 µH
4.0 µH
0.8 µH
0.9 µH
1.0 µH
1.2 µH
SER2010
SER2011
SER2012
SER2013
SER2014
SER2009
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded Power Inductors
–
SER2000 Series
Document 349-2 Revised 06/04/18
L vs Current
0.1 1 10010
Inductance (µH)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
Current (A)
2.0 µH
1.2 µH
0.68 µH 0.50 µH
1.0 µH 0.90 µH 0.80 µH 0.60 µH 0.30 µH
0.1 1 10010
Inductance (µH)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
Current (A)
2.0 µH
1.2 µH
0.68 µH 0.50 µH
0.60 µH 0.30 µH
1.0 µH 0.90 µH 0.80 µH
SER2010
0.1 1 10010
Inductance (µH)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
Current (A)
2.0 µH
1.2 µH
0.68 µH
0.50 µH
1.0 µH 0.90 µH 0.80 µH
0.60 µH
SER2011
Document 349-4
0.1 1 10010
Inductance (µH)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
Current (A)
2.0 µH
1.2 µH
0.68 µH 0.60 µH
1.0 µH 0.90 µH 0.80 µH
0.1 1 10010
Inductance (µH)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
Current (A)
4.7 µH
3.6 µH
2.0 µH
1.2 µH
0.68 µH
1.0 µH 0.90 µH 0.80 µH
0.1 1 10010
Inductance (µH)
0.1
1.0
2.0
4.0
6.0
8.0
10.0
0.2
0.4
0.6
0.8
Current (A)
4.0 µH
2.0 µH
1.2 µH
1.0 µH 0.90 µH 0.80 µH
SER2012
SER2013
SER2014
SER2009
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Coilcraft:
SER2013-362MLD SER2014-202MLD SER2010-901MLB SER2009-301MLD SER2010-681MLD SER2014-
202MLB SER2011-901MLB SER2012-202MLB SER2013-202MLB SER2011-801MLD SER2014-402MLB
SER2009-122MLB SER2010-301MLB SER2010-202MLB SER2012-601MLB SER2011-122MLD SER2014-122MLD
SER2013-102MLB SER2014-122MLB SER2009-501MLD SER2009-601MLD SER2009-801MLB SER2010-
601MLB SER2013-901MLB SER2011-501MLB SER2012-122MLD SER2013-681MLD SER2009-501MLB
SER2010-122MLB SER2013-472MLB SER2014-801MLB SER2010-501MLB SER2013-122MLB SER2009-301MLB
SER2009-102MLB SER2012-901MLB SER2009-901MLD SER2011-601MLD SER2010-601MLD SER2010-
202MLD SER2013-202MLD SER2011-901MLD SER2011-801MLB SER2009-122MLD SER2012-681MLD
SER2014-901MLD SER2009-102MLD SER2014-801MLD SER2013-681MLB SER2010-901MLD SER2010-102MLD
SER2010-122MLD SER2012-601MLD SER2014-402MLD SER2009-901MLB SER2013-801MLB SER2011-
501MLD SER2013-472MLD SER2012-122MLB SER2011-601MLB SER2012-801MLB SER2010-301MLD
SER2010-501MLD SER2012-202MLD SER2009-202MLB SER2013-102MLD SER2014-901MLB SER2009-202MLD
SER2009-801MLD SER2012-801MLD SER2013-402MLD SER2012-102MLB SER2013-362MLB SER2009-
601MLB SER2014-102MLB SER2011-102MLB SER2013-122MLD SER2014-102MLD SER2009-681MLB
SER2012-681MLB SER2011-681MLB SER2010-801MLD SER2011-681MLD SER2010-801MLB SER2009-681MLD
SER2012-901MLD SER2013-901MLD SER2013-801MLD SER2011-122MLB SER2010-681MLB SER2011-
202MLB SER2013-402MLB SER2010-102MLB SER2011-202MLD SER2011-102MLD SER2012-102MLD
