790D335X0040B2H - Vishay Presicion Group

790D

www.vishay.com Vishay Sprague

Revision: 18-Jun-12 1Document Number: 42072

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Resin-Molded, Radial-Lead

Solid Tantalum Capacitors

FEATURES

• Terminations: Tin/lead (SnPb), 100 % tin (Sn)

• Four case sizes precisely molded with a flame

retardant epoxy resin

• Stand off on all case sizes

• Available on tape for automatic insertion

equipment (only A- and B-case, C- and D-case

on request)

• Low leakage current

•Low impedance

• Extended value ranges available

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

Note

*Lead (Pb)-containing terminations are not RoHS-compliant.

Exemptions may apply.

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 125 °C

(above 85 °C, voltage derating is required)

Capacitance Range: 0.1 μF to 330 μF

Capacitance Tolerance: ± 10 %, ± 20 %

Voltage Rating: 6.3 VDC to 50 VDC

ORDERING INFORMATION

790D 157 X0 006 R 2 P E3

MODEL CAPACITANCE CAPACITANCE

TOLERANCE

DC VOLTAGE

RATING

CASE

CODE

STYLE

NUMBER

PACKAGING RoHS

COMPLIANT

790D =

Standard

and

extended

range

Expressed in

picofarads.

The first two

digits are the

significant

figures. The

third is the

number of

zeros following.

X0 = ± 20 %

X9 = ± 10 %

Expressed in

volts. To

complete the

three-digit

block, zeros

precede the

voltage rating.

A decimal

point is indicated

by an “R”

(6R3 = 6.3 V)

See

Ratings

and Case

Codes

table

Insulated

case

(standard)

See packing information

B: Bulk

G: Ammopack

(H = 16.5 mm)

H: Ammopack

(H = 18.5 mm)

I: Ammopack shouldered

leads (A case)

X: Reel pack

(H = 16.5 mm)

Y: Reel pack

(H = 18.5 mm)

Z: Reel pack shouldered

leads (A case)

E3 = 100 %

tin termination

(RoHS

compliant)

Blank = SnPb

termination

DIMENSIONS in inches [millimeters]

CASE CODE H MAX. D MAX. T MAX. E ± 0.15 [0.006] Ø 0.05 [0.002] (+ 10 %)

A 0.287 [7.3] 0.185 [4.7] 0.165 [4.2] 0.100 [2.54] 0.020 [0.5]

B 0.413 [10.5] 0.287 [7.3] 0.189 [4.8] 0.200 [5.08] 0.020 [0.5]

C 0.413 [10.5] 0.484 [12.3] 0.287 [7.3] 0.400 [10.16] 0.024 [0.6]

D 0.413 [10.5] 0.484 [12.3] 0.484 [12.3] 0.400 [10.16] 0.024 [0.6]

12 mm

min.

0.3 mm

MIN.

790D

www.vishay.com Vishay Sprague

Revision: 18-Jun-12 2Document Number: 42072

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

RATINGS AND CASE CODES

(μF)

RATED VOLTAGE UR AT + 85 °C

6.3 V 10 V 16 V 20 V 25 V 35 V 40 V 50 V

CATEGORY VOLTAGE UC AT + 125 °C

4.0 V 6.3 V 10 V 13 V 16 V 23 V 25 V 32 V

STD. EXT. STD. EXT. STD. EXT. STD. EXT. STD. EXT. STD. EXT. STD. EXT. STD. EXT.

0.10 AA

0.15 AA

0.22 AA

0.33 A

0.47 A

0.68 A

1.0 AA

1.5 ABB

2.2 A A B B

3.3 A A B A B

4.7 A A B B

6.8 A A B C

10 A B B C C

15 A B B B C C

22 A B B B C

33 B B C C D

47 B B C C D D

68 B C C

100 C D C D

150 C C D

220 C D

330 D

STANDARD RATINGS/EXTENDED RATINGS

CAPACITANCE

CR (μF) CASE CODE PART NUMBER

MAX. DCL

AT + 25 °C

(μA)

MAX. DF

120 Hz, AT + 25 °C

(%)

MAX. IMPEDANCE

100 kHz, AT + 25 °C

()

UR = 6.3 VDC AT + 85 °C, SURGE = 8 V; UC = 4 VDC AT + 125 °C, SURGE = 5 V

6.8 A 790D685X(1)6R3A2(2) 1.0 6 4.0

22 A 790D226X(1)6R3A2(2) 1.3 6 2.1

47 B 790D476X(1)6R3B2(2) 2.9 6 1.3

68 B 790D686X(1)6R3B2(2) 4.2 6 1.3

150 C 790D157X(1)6R3C2(2) 9.4 6 0.6

220 C 790D227X(1)6R3C2(2) 13.8 6 0.6

330 D 790D337X(1)6R3D2(2) 20.7 8 0.4

Notes

• Part number definitions:

(1) Insert 0 for ± 20 % tolerance or 9 for ± 10 %

(2) See Ordering Information, packaging code

• Extended ratings in bold print

790D

www.vishay.com Vishay Sprague

Revision: 18-Jun-12 3Document Number: 42072

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

UR = 10 VDC AT + 85 °C, SURGE = 13 V; UC = 6.3 VDC AT + 125 °C, SURGE = 8 V

4.7 A 790D475X(1)010A2(2) 1.0 6 4.0

15 A 790D156X(1)010A2(2) 1.5 6 2.5

33 B 790D336X(1)010B2(2) 3.3 6 1.3

47 B 790D476X(1)010B2(2) 4.7 6 1.4

68 B 790D686X(1)010B2(2) 6.8 6 1.3

100 C 790D107X(1)010C2(2) 10.0 6 0.6

150 C 790D157X(1)010C2(2) 15.0 6 0.6

220 D 790D227X(1)010D2(2) 22.0 8 0.4

UR = 16 VDC AT + 85 °C, SURGE = 20 V; UC = 10 VDC AT + 125 °C, SURGE = 13 V

2.2 A 790D225X(1)016A2(2) 1.0 6 5.5

3.3 A 790D335X(1)016A2(2) 1.0 6 4.4

10 A 790D106X(1)016A2(2) 1.6 6 2.7

15 B 790D156X(1)016B2(2) 2.4 6 1.6

22 B 790D226X(1)016B2(2) 3.5 6 1.3

33 B 790D336X(1)016B2(2) 5.2 6 1.6

47 C 790D476X(1)016C2(2) 7.5 6 0.8

68 C 790D686X(1)016C2(2) 10.8 6 0.6

100 C 790D107X(1)016C2(2) 16.0 6 0.7

100 D 790D107X(1)016D2(2) 16.0 6 0.5

150 D 790D157X(1)016D2(2) 24.0 8 0.4

UR = 20 VDC AT + 85 °C, SURGE = 26 V; UC = 13 VDC AT + 125 °C, SURGE = 16 V

2.2 A 790D225X(1)020A2(2) 1.0 6 5.5

6.8 A 790D685X(1)020A2(2) 1.3 6 3.5

15 B 790D156X(1)020B2(2) 3.0 6 1.5

22 B 790D226X(1)020B2(2) 4.4 6 2.1

47 C 790D476X(1)020C2(2) 9.4 6 0.7

68 C 790D686X(1)020C2(2) 13.6 6 0.8

100 D 790D107X(1)020D2(2) 20.0 6 0.7

UR = 25 VDC AT + 85 °C, SURGE = 32 V; UC = 16 VDC AT + 125 °C, SURGE = 20 V

1.5 A 790D155X(1)025A2(2) 1.0 6 6.0

4.7 A 790D475X(1)025A2(2) 1.1 6 4.5

10 B 790D106X(1)025B2(2) 2.5 6 1.6

15 B 790D156X(1)025B2(2) 3.7 6 2.4

22 B 790D226X(1)025B2(2) 5.5 6 2.1

33 C 790D336X(1)025C2(2) 8.2 6 0.8

47 D 790D476X(1)025D2(2) 11.8 6 1.0

UR = 35 VDC AT + 85 °C, SURGE = 45 V; UC= 23 VDC AT + 125 °C, SURGE = 29 V

3.3 A 790D335X(1)035A2(2) 1.2 6 6.0

10 B 790D106X(1)035B2(2) 3.5 6 2.6

33 C 790D336X(1)035C2(2) 11.6 6 1.3

STANDARD RATINGS/EXTENDED RATINGS

CAPACITANCE

CR (μF) CASE CODE PART NUMBER

MAX. DCL

AT + 25 °C

(μA)

MAX. DF

120 Hz, AT + 25 °C

(%)

MAX. IMPEDANCE

100 kHz, AT + 25 °C

()

Notes

• Part number definitions:

(1) Insert 0 for ± 20 % tolerance or 9 for ± 10 %

(2) See Ordering Information, packaging code

• Extended ratings in bold print

790D

www.vishay.com Vishay Sprague

Revision: 18-Jun-12 4Document Number: 42072

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

UR = 40 VDC AT + 85 °C, SURGE = 52 V; UC = 25 VDC AT + 125 °C, SURGE = 32 V

0.10 A 790D104X(1)040A2(2) 1.0 6 30.0

0.15 A 790D154X(1)040A2(2) 1.0 6 24.0

0.22 A 790D224X(1)040A2(2) 1.0 6 18.0

0.33 A 790D334X(1)040A2(2) 1.0 6 14.0

0.47 A 790D474X(1)040A2(2) 1.0 6 11.0

1.0 A 790D105X(1)040A2(2) 1.0 6 6.5

1.5 B 790D155X(1)040B2(2) 1.0 6 5.2

2.2 B 790D225X(1)040B2(2) 1.0 6 4.0

3.3 A 790D335X(1)040A2(2) 1.3 6 2.8

3.3 B 790D335X(1)040B2(2) 1.3 6 2.8

4.7 B 790D475X(1)040B2(2) 1.8 6 2.0

6.8 B 790D685X(1)040B2(2) 2.7 6 1.6

10 C 790D106X(1)040C2(2) 4.0 6 1.3

15 C 790D156X(1)040C2(2) 6.0 6 1.0

22 C 790D226X(1)040C2(2) 8.8 6 0.8

33 D 790D336X(1)040D2(2) 13.2 6 0.6

47 D 790D476X(1)040D2(2) 18.8 6 0.5

UR = 50 VDC AT + 85 °C, SURGE = 65 V; UC = 32 VDC AT + 125 °C, SURGE = 41 V

0.10 A 790D104X(1)050A2(2) 1.0 6 30

0.15 A 790D154X(1)050A2(2) 1.0 6 24

0.22 A 790D224X(1)050A2(2) 1.0 6 18

0.68 A 790D684X(1)050A2(2) 1.0 6 8.0

1.0 A 790D105X(1)050A2(2) 1.0 6 6.5

1.5 B 790D155X(1)050B2(2) 1.0 6 5.2

2.2 B 790D225X(1)050B2(2) 1.1 6 4.0

3.3 B 790D335X(1)050B2(2) 1.6 6 2.8

4.7 B 790D475X(1)050B2(2) 2.3 6 2.0

6.8 C 790D685X(1)050C2(2) 3.4 6 1.6

10 C 790D106X(1)050C2(2) 5.0 6 1.3

15 C 790D156X(1)050C2(2) 7.5 6 1.0

STANDARD RATINGS/EXTENDED RATINGS

CAPACITANCE

CR (μF) CASE CODE PART NUMBER

MAX. DCL

AT + 25 °C

(μA)

MAX. DF

120 Hz, AT + 25 °C

(%)

MAX. IMPEDANCE

100 kHz, AT + 25 °C

()

Notes

• Part number definitions:

(1) Insert 0 for ± 20 % tolerance or 9 for ± 10 %

(2) See Ordering Information, packaging code

• Extended ratings in bold print

790D

www.vishay.com Vishay Sprague

Revision: 18-Jun-12 5Document Number: 42072

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

MAXIMUM PERMISSIBLE RIPPLE VOLTAGE AT + 25 °C

TYPICAL CURVES OF IMPEDANCE VS FREQUENCY

0.1

Urms

0.7

0.5

0.2

0.3

50 V

10 V

25 V

6.3 V

16 V

35/40 V

0.1K 0.5 1K 5 10K 50 100K 500

FREQUENCY IN Hz

CASE SIZE “A”

0.1

Urms

0.7

0.5

0.2

0.3

0.1K 0.5 1K 5 10K 50 100K 500

FREQUENCY IN Hz

CASE SIZE “B”

50 V

10 V

25 V

6.3 V

16 V

35/40 V

0.1

rms

0.7

0.5

0.2

0.3

0.1K 0.5 1K 5 10K 50 100K 500

FREQUENCY IN Hz

CASE SIZE “C”

50 V

10 V

25 V

6.3 V

16 V

35/40 V

0.1

Urms

0.7

0.5

0.2

0.3

0.1K 0.5 1K 5 10K 50 100K 500

FREQUENCY IN Hz

CASE SIZE “D”

50 V

10 V

25 V

6.3 V

16 V

35/40 V

FREQUENCY IN Hz

0.1

1K 10K 100K 1M 10M 100M

47 µF

6.3 V

6.8 µF

330 µF

150 µF

FREQUENCY IN Hz

1K 10K 100K 1M 10M 100M

100

0.1

47 µF

6.8 µF

1µF

22 µF

35 V

790D

www.vishay.com Vishay Sprague

Revision: 18-Jun-12 6Document Number: 42072

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Non preferred configuration on request only

PERFORMANCE CHARACTERISTICS

1. Operating Temperature: - 55 °C to + 85 °C with rated

voltage UR applied. + 85 °C to 125 °C with linear

voltage derating to category voltage UC(see general

information) applied.

2. Capacitance and Tolerance: Capacitance measured at

100 Hz and + 25 °C shall be within the specified tolerance

limits of the nominal rating.

3. Reverse Voltage: 15 % of rated voltage at + 25 °C

5 % of rated voltage at + 85 °C

4. Surge Voltage: 130 % of UR at + 85 °C

130 % of UC at + 125 °C

5. Impedance at 100 kHz: Measured at + 20 °C ± 5 °C,

impedance shall not exceed the values listed in

datasheet.

6. Stability at low and high temperatures: Capacitance

change with temperature, dissipation factor and DC

leakage current shall not exceed the limits of the

following table.

7. Life Test: 2000 h at + 85 °C with rated voltage applied

2000 h at + 125 °C with category voltage applied

C/C  10 % of initial value

IL  1.25 initial limit

DF  initial limit

8. Humidity Test: 56 days at + 40 °C, 90 % relative

humidity

C/C  8 % of initial value

IL  initial limit

DF  initial limit

9. Charge and Discharge Test:

1 million cycles at + 85 °C,

0.5 s charge at UR

0.5 s discharge

Series resistance < 0.5 

C/C  5 % of initial value

IL  initial limit

DF  initial limit

10. Marking:

Top: Rating and polarity

Front: Type, date code, Sprague trademark

PACKAGING QUANTITIES

CASE CODE REEL

X/Y

AMMO

G/H

BULK

A 1000 1000 500

B 1000 1000 250

C 300 (1) 300 (1) 100

D 200 (1) 200 (1) 50

TEMP.

CAPACITANCE

CHANGE

CRUR  1900

CRUR > 1900

DISSIPATION

FACTOR

LEAKAGE

CURRENT

- 55 °C - 10 % 9 % -

11 %

+ 25 °C -

6 % 0.01 CR x UR or

1 μA whichever

is greater

8 %

+ 85 °C + 12 %

9 % 0.1 CR x UR or

10 μA whichever

is greater

11 %

+ 125 °C + 15 %

12 % 0.125 CR x UR or

12.5 μA

whichever

is greater

14 %

790D

www.vishay.com Vishay Sprague

Revision: 18-Jun-12 7Document Number: 42072

For technical questions, contact: tantalum@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

TAPE AND REEL PACKING

DESIGNATIONS SYMBOL DIMENSIONS (mm)

Pitch of component P 12.7 ± 1.0

Feed hole pitch P0 12.7 ± 0.3

Tape width W 18 (+ 1/- 0.5)

Hold down tape width W05.0

Hole position W19 (+ 0.75/-0.5)

Hold down tape position W2 0 (+ 3/-0)

Feed hole diameter D04.0 ± 0.3

Tape thickness T 0.5 ± 0.2

Component alignment h0 ± 2

Lead clinch height H016.0 ± 0.5

Hole center to component center P2 6.35 ± 1.3

Lead wire spacing

Feed hole center to wire center

CASE A

2.5 + 0.6/- 0.1

5.1 ± 0.7

CASE B

5 + 0.6/- 0.1

3.85 ± 0.7

CASE B

5 + 0.6/- 0.1

3.85 ± 0.7

Reel pack options H = 16.5

H = 18.5

Y Z X

Ammopack options H = 16.5

H = 18.5

H I G

Quantity per reel/box 1000 1000 1000

PRODUCT INFORMATION

Quick Reference Guide www.vishay.com/doc?40037

Selector Guide www.vishay.com/doc?49054

Parameter Comparison Guide www.vishay.com/doc?40033

Mounting of Through-Hole Components www.vishay.com/doc?40108

Frequently Asked Questions www.vishay.com/doc?40110

Reel packing

Ammopacking

W0W1W

h

30 MAX.

P1FP0 Ø D

SPRAGUE

191

201

320 to 330

329 - 331

Ø 20

41 to 45

Direction of unreel

“A” and “B” cases only (meets IEC 286-2)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 12-Mar-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree

to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and

damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay

or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to

obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.