MW24 series
24 Watt Medical Grade AC Adapter
Electrical Specifications
Input
Voltage................................ 100 - 240 VAC
Current................................ 0.43 Amp @ 115 VAC
Frequency........................... 47 - 63 Hz
Input connector................... 3 Pin IEC 320 input receptacle
Max. Earth leakage current:
Output
Line regulation.................... TYP +/- 1%
Load regulation................... TYP +/- 5%
Set point............................. +/- 3% at 60% load
Hold up time........................ 20 ms min at full load, 115 VAC
Transient response............. 2 ms for 50% load change typical
Over voltage protection....... Built-in
Over current protection....... Built-in
Short circuit protection........ Pulsing mode, auto recovery
Efficiency............................ 80% min at full load and 115 VAC
Ripple/noise (Vp-p)............... +/- 1% (20 MHz bandwidth)
Output connector................ Barrel type (5.5 x 2.5 x 9.5 mm)
Features
Wide range AC input
Fully regulated output
High efficiency
Medical grade approval
Also available in white
5 year warranty
Environmental
Operating temperature.......... 0 C to 40 C
Storage temperature............. -55 C to 85 C
Weight = 0.45 lbs
EMI/EMC
Meets FCC class B, CISPR 11 class B
Safety
UR/cUR UL2601-1
CE Marked EN60601-1-2:2001
Polarity
Elpac Power Supplies 1562 Reynolds Ave. Irvine, CA 92614 USA TEL +1 949-476-6070 www.elpac.com info@elpac.com
Com +V
1.30" [33.0 mm]
2.5" [64.5 mm]
4.25" [108.0 mm]
Model No. Voltage Power Current
MW2412-760-NC-BK 12V 24W 2.0A
MW2415-760-NC-BK 15V 24W 1.6A
MW2418-760-NC-BK 18V 24W 1.33A
MW2424-760-NC-BK 24V 24W 1.0A
Rev 0604
Test Voltage Normal Single-fault
132 VAC 60 Hz 55 uA 90 uA
264 VAC 60 Hz 110 uA 180 uA
