The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT 16 PO5G GT 11 GT 14 -- Connectors for coaxial shielded cables -- <Several types and configurations: In-line, board mounted, combinations of coaxial cable with signal/power, Multi-position and color/ keying variations.> GT 13 GT5 Series GT 5 Termination of coaxial cables in automotive, medical and instrumentation applications utilizes a single motion to crimp the center conductor, shield and outer insulation. GT 17 GT 19 GT 3 GT 6W GT 7 GT 10 GT 9 GT 25 In-car communication, car sensors (temperature, pressure), automotive audio systems, GPS antenna systems, RACS antenna audio/video antenna systems, CRT displays, medical and measuring instrumentation, variety of communication equipment, office automation equipment, LAN systems. GT 8 Applications GT 15 USCAR Standard titled "Square Outer Conductor (SAE/USCAR-19)" excludes Water Proof type (GT5W) Cost efficient termination Highly efficient and reliable single motion "Twin Crimp TM " termination allows high volume production with semi-automatic equipment. Space-saving Design Lock-release latching system Shock / vibration resistant electrical connections Verification of the full contact insertion Color and polarizing variations Excellent High Frequency Performance Refer to V.S.W.R. data on the following pages. GT 18W Features *"Twin Crimp " is a registered trade mark of Hirose Electric. 7 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines SAE/USCAR-19 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 GT 16 GT 13 B Test Data (Using 1.5D-2V Type cable) High Frequency Characteristics (V.S.W.R.) 3.0 PO5G 2.8 2.6 GT 11 2.4 2.2 GT 14 2.0 1.8 GT 19 GT 17 1.6 1.4 1.2 1 1.0 2.0 3.0GHZ B Termination sequence 1. Strip the cable. 2. Crimp the cable to the terminal. 3.5 9.5 5 GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 Note: Typical data using fully assemblied and connected GT5-1S-HU and the GT5-1PP-HU. GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series 8 3. Insert the terminal in the housing until is fully locked. 4. Fully insert the retainer. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT5 Series GT 5 21.7 4.6 5.8 GT 13 F Connector Terminals 4.6 GT 16 Conductor Size (AWG) Inner Insulation Diameter Outer Diameter Packaging RoHS #30 or equivalent 0.6 to 0.9mm 1.4 to 1.8mm 1,300 pcs. per reel GT5-2428/1.1-2.2SCF 755-0123-6-70 #24 to 28 or equivalent 1.0 to 1.4mm 2.0 to 2.4mm 1,300 pcs. per reel GT5-2428/1.6-2.5SCF(70) 755-0078-3-70 #24 to 28 or equivalent 1.5 to 2.0mm 2.3 to 2.7mm 1,300 pcs. per reel 1.5 to 2.0mm 2.6 to 3.4mm 1,300 pcs. per reel 755-0022-9-70 #30 or equivalent #20 to 22 or equivalent GT5-2022/F2.7-3.5SCF(70) 755-0077-0-70 #20 to 22 or equivalent 2.0 to 2.5mm 3.3 to 3.7mm 1,100 pcs. per reel GT5-2022/F3.3-3.8SCF(70) 755-0054-5-70 #20 to 22 or equivalent 2.5 to 2.9mm 3.6 to 4.0mm 1,100 pcs. per reel GT5-30/F3.3-5SCF(70) 755-0016-6-70 #30 or equivalent GT5-2428/F3.3-5SCF(70) 755-0012-5-70 #24 to 28 or equivalent 2.5 to 2.9mm 4.6 to 5.0mm 1,100 pcs. per reel GT5-2022/F3.3-5SCF(70) 755-0034-8-70 #20 to 22 or equivalent GT5-30/F4-5SCF(70) 755-0020-3-70 #30 or equivalent GT5-2428/F4-5SCF(70) 755-0024-4-70 #24 to 28 or equivalent 755-0036-3-70 3.0 to 3.6mm YES 4.6 to 5.0mm 1,100 pcs. per reel #20 to 22 or equivalent Part Material Finish Insulator PBT Color: Dark gray Crimp terminals Phosphor bronze Tin plating Outer terminals Brass Tin plating M Connector Terminals GT 19 Note: Products marked with an asterisk (*) indicate polyethylene foam insulation. 23.05 5.8 GT 3 5.8 GT 6W Outer Diameter Packaging 0.6 to 0.9mm 1.4 to 1.8mm 900 pcs. per reel 1.5 to 2.0mm 2.6 to 3.4mm 900 pcs. per reel GT5-2022/F2.7-3.5PCF(70) 755-0076-8-70 #20 to 22 or equivalent 2.0 to 2.5mm 3.3 to 3.7mm 900 pcs. per reel GT5-2022/F3.3-3.8PCF(70) 755-0053-2-70 #20 to 22 or equivalent 2.5 to 2.9mm 3.6 to 4.0mm 900 pcs. per reel 2.5 to 2.9mm 4.6 to 5.0mm 900 pcs. per reel CL No. Conductor Size (AWG) GT5-30/0.7-1.5PCF(70) 755-0017-9-70 #30 or equivalent GT5-30/1.6-2.9PCF(70) 755-0021-6-70 #30 or equivalent GT5-2428/1.6-2.9PCF(70) 755-0001-9-70 #24 to 28 or equivalent RoHS GT 7 Inner Insulation Diameter Part Number GT 17 #24 to 28 or equivalent GT5-2022/1.6-2.9SCF(70) 755-0071-4-70 GT 14 GT5-2428/1.6-2.9SCF(70) 755-0002-1-70 GT5-2022/F4-5SCF(70) GT 11 755-0065-1-70 GT5-30/1.6-2.9SCF(70) * * * * * * * CL No. PO5G Part Number GT5-30/0.7-1.5SCF(70) GT5-2022/1.6-2.9PCF(70) 755-0094-0-70 #20 to 22 or equivalent GT5-30/F3.3-5PCF(70) 755-0015-3-70 #30 or equivalent YES Part Material Finish Insulator PBT Color: Dark gray Crimp terminals Brass Tin plating Outer terminals Brass Tin plating GT5-2022/F3.3-5PCF(70) 755-0033-5-70 #20 to 22 or equivalent GT5-30/F4-5PCF(70) 755-0019-4-70 #30 or equivalent GT5-2428/F4-5PCF(70) 755-0023-1-70 #24 to 28 or equivalent GT5-2022/F4-5PCF(70) 755-0035-0-70 #20 to 22 or equivalent 3.0 to 3.6mm 4.6 to 5.0mm 900 pcs. per reel GT 15 Note: Products marked with an asterisk (*) indicate polyethylene foam insulation. 23.05 5.8 GT 8 5.8 Low-insertion M Connector Terminals GT 18W GT5-2428/F3.3-5PCF(70) 755-0011-2-70 #24 to 28 or equivalent GT 10 * * * * * * * GT 9 HRS No. Conductor Size (AWG) Inner Insulation Diameter Outer Diameter Packaging 0.6 to 0.9mm 1.4 to 1.8mm 900 pcs. per reel GT5L-30/0.7-1.5PCF(70) 755-0068-0-70 #30 or equivalent GT5L-30/1.6-2.9PCF(70) 755-0067-7-70 #30 or equivalent 2.6 to 3.4mm GT5L-2428/1.6-2.9PCF(70) 755-0066-4-70 #24 to 28 or equivalent 1.5 to 2.0mm 2.6 to 3.4mm GT5L-2428/1.6-2.5PCF(70) 755-0079-6-70 #24 to 28 or equivalent 2.3 to 2.7mm 900 pcs. per reel RoHS YES Part Material Finish Insulator PBT Color: Dark gray Crimp terminals Brass Tin plating Outer terminals Brass Tin plating GT 25 Part Number 9 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines Terminals for coaxial shielded cable The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 GT 13 BKeying Configurations For Single-Conductor coaxial shielded cable F Connectors 9.6 GT 16 Housings Figure q Figure w Figure e Figure r Figure t Figure y Figure u Figure i Figure o 13 GT 11 11.1 PO5G 25 GT 14 GT5-1S-HU Material CL No. Key polarizing Corresponding M Connector code Housing- In-line Color Corresponding M Connector USCAR-19 Assembly- Board Mounting Coding RoHS GT5-1S-HU 755-0004-7 Light gray Figure q GT5-1PP-HU(70) GT5-1P-DS(70) - GT5-1S-HU(A) 755-0037-6 Brown Figure w GT5-1PP-HU(A)(70) GT5-1P-DS(A)(70) A GT5-1S-HU(B) 755-0038-9 Green Figure e GT5-1PP-HU(B)(70) GT5-1P-DS(B)(70) B GT5-1S-HU(C) 755-0080-5 Blue Figure r GT5-1PP-HU(C)(70) GT5-1P-DS(C)(70) C GT5-1S-HU(D) 755-0081-8 Purple Figure t GT5-1PP-HU(D)(70) GT5-1P-DS(D)(70) D GT5-1S-HU(E) 755-0082-0 Pink Figure y GT5-1PP-HU(E)(70) GT5-1P-DS(E)(70) E GT5-1S-HU( I ) - Black Figure u GT5-1PP-HU( I ) GT5-1P-DS( I ) I GT5-1S-HU(J) - Cream white Figure i GT5-1PP-HU(J) GT5-1P-DS(J) J GT5-1S-HU(K) - Pastel orange Figure o GT5-1PP-HU(K) GT5-1P-DS(K) K PBT Retainer (-Optional-Used with the housings: GT5-1S-HU, GT5-1PP-HU, GT5N-1PP-HU, GT5H-1PP-HU) YES Retainer 7.85 14.8 GT 10 Material Color RoHS 755-0006-2 PBT Dark gray YES Housing (Not requiring use of the retainer) 9.6 GT 18W CL No. GT5-1P/S-R GT 8 GT 15 Part Number 10 13 1.2 11.1 GT 9 25 GT5R-1S/ HU Part Number CL No. Material Color RoHS GT5R-1S-HU 755-0047-0 PBT Light gray YES BShown with inserted retainer. (26.35) 2.8 GT 7 GT 6W GT 3 GT 19 GT 17 Part Number GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT5 Series 14.8 GT 13 30 Figure w Figure e Figure r Figure t Figure y Figure u Figure i Figure o 13.4 GT 16 Figure q Outside ground connection Key polarizing USCAR-19 code Coding RoHS Color - GT5-1S-HU(A) Brown Figure w A GT5-1S-HU(B) Green Figure e B GT5-1S-HU(C) Blue Figure r C GT5-1S-HU(D) Purple Figure t D 755-0105-4-70 GT5-1S-HU(E) Pink Figure y E GT5-1PP-HU( I )(70) - GT5-1S-HU( I ) Black Figure u I GT5-1PP-HU(J)(70) - GT5-1S-HU(J) Cream white Figure i J GT5-1PP-HU(K)(70) - GT5-1S-HU(K) Pastel orange Figure o K GT5-1S-HU GT5-1PP-HU(A)(70) 755-0039-1-70 GT5-1PP-HU(B)(70) 755-0040-0-70 GT5-1PP-HU(C)(70) 755-0103-9-70 GT5-1PP-HU(D)(70) 755-0104-1-70 GT5-1PP-HU(E)(70) Note : Refer to pages 27 for panel mounting in-line bracket. (31.35) YES Retainer(GT5-1P/S-R) Part Material Housing PBT ____ Ground terminal Phosphor bronze Tin plating Finish 30 25 (41.4) (11.4) GT5H-1PP-HU GT5-1S-HU 0.8 GT 7 9.85 13.4 11.8 CL No. Color Material GT5H-1PP-HU (10) 755-0093-7 10 Light Gray PBT GT5-1S-HU YES GT5R-1S-HU (41.4) (11.4) 17 GT5-1P/S-R (1.35) 3 (1.35) CL No. Color Material GT5N-1PP-HU 755-0090-9 Light Gray PBT GT 25 Retainer(GT5-1P/S-R) GT 9 GT5-1P/S-R 9.2 Part Number GT5-1S-HU 0.6 15.9 GT5N-1PP-HU GT 8 9.95 12.2 30 GT 15 BFully mated connector assemblies. 30 25 13.5 Retainer(GT5-1P/S-R) Corresponding F Connector RoHS Housing Housing (For use with N type mounting bracket) 6.8 (1.35) GT 18W Part Number GT5-1P/S-R 20.25 GT 10 GT5-1P/S-R (1.35) GT 6W BFully mated connector assemblies. 14.3 GT 3 Housings (For use with H type mounting bracket) BShown with inserted retainer. GT 19 Figure q 755-0005-0-70 GT 17 Light Gray GT5-1PP-HU(70) GT 14 Corresponding F Connector Housing GT 11 CL No. PO5G Mounting bracket attachment side Part Number GT 5 Housings Corresponding F Connector RoHS Housing GT5-1S-HU GT5R-1S-HU YES 11 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines BKeying Configurations M Connectors The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. mounting, enhanced [ Panel ] shielding type BRecommended Panel Cut-out 19 10.4 M3 11.6 11.8 26 19 30 BMounted and fully mated connector assemblies 30 GT5-1S-HU 15 Panel thickness:1.6 6.2 GT 14 14 13.4 7 11.15 GT 11 12.4 9.95 PO5G 15 5.8 GT 5 GT 16 GT 13 Housings Part Number GT5A-1PP-HU(70) CL No. 755-0025-7-70 Part Material Finish Housing PBT Color: Light gray Ground terminal Brass Tin plating Corresponding F Connector Housing RoHS GT5-1S-HU, GT5R-1S-HU YES 13 11.8 12.4 GT 7 9.95 Note 1: Retainer is unnecessary. Note 2: Use JIS B 1111 and 1101 M3 screws for the mounting screws. GT 6W GT 3 GT 19 GT 17 M3 4 15 7 13.4 14 9.5 GT 8 GT 15 6.2 GT 18W 11.15 GT 10 30 GT 9 Part Number GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series 12 GT5P-1PP-HU(70) CL No. 755-0030-7-70 Part Material Finish Housing PBT Color: Light gray Ground terminal Brass Tin plating Note 1: Retainer is unnecessary. Note 2: Use JIS B 1111 and 1101 M3 screws for the mounting screws. Corresponding F Connector Housing RoHS GT5-1S-HU, GT5R-1S-HU YES GT5-1P/S-R The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT5 Series 26 19 16.8 11.8 12.65 GT5-1S-HU Chassis PO5G 1.2 8.1 7 15.9 GT 11 13.4 5 Assembly Diagram(1:1) 11.15 GT 16 GT5-1P/S-R 1 2.6 GT 13 27.4 12.3 GT 5 BMounted and fully mated connector assemblies 5 1.2 GT 14 GT 17 GT5B-1PP-HU(70) CL No. 755-0051-7-70 GT 19 Part Number Corresponding F Connector Housing RoHS Part Material Finish Housing PBT Color: Light gray Ground terminal Copper alloy Tin plating GT5-1S-HU, GT5R-1S-HU YES GT 3 Note 1: Retainer is unnecessary. Note 2: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws for the mounting screws. 11.8 12.8 19 26 27.4 12.3 GT5-1S-HU GT 7 12.65 BMounted and fully mated connector assemblies GT 6W 30 GT5-1P/S-R 2.6 7 8.1 13.4 14 11.15 GT 18W Assembly Diagram (1:1) GT 10 Chassis 3.6 GT 15 4 3.2 GT 8 GT 9 GT5S-1PP-HU(70) CL No. 755-0050-4-70 Part Material Finish Housing PBT Color: Light gray Ground terminal Copper alloy Tin plating Corresponding F Connector Housing RoHS GT5-1S-HU, GT5R-1S-HU YES GT 25 Part Number Note 1: Retainer is unnecessary. Note 2: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws for the mounting screws. 13 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines 30 3.2 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. 13.9 13.9 12.8 3 13.9 12.8 11.8 20.4 15.4 GT 13 GT 5 21.3 Connector assembly, Printed Circuit Board Mounting Type Figure w Figure e Figure r Figure t Figure y Figure i Figure o PO5G GT 16 Figure q GT 11 12.8 BFully Mated connector assemblies 21.3 GT5-1 GT5-1P/S-R Note 15.4 GT 17 Key polarizing Corresponding F Connector M Connector-Board Type RoHS code Housing CL No. Color GT5-1P-DS(70) 755-0007-5-70 Light Gray Figure q GT5-1P-DS GT5-1S-HU GT5-1P-DS(A)(70) 755-0041-3-70 Brown Figure w GT5-1P-DS(A) GT5-1S-HU(A) GT5-1P-DS(B)(70) 755-0042-6-70 Green Figure e GT5-1P-DS(B) GT5-1S-HU(B) GT5-1P-DS(C)(70) 755-0083-3-70 Blue Figure r GT5-1P-DS(C) GT5-1S-HU(C) GT5-1P-DS(D)(70) 755-0084-6-70 Purple Figure t GT5-1P-DS(D) GT5-1S-HU(D) Part Material GT5-1P-DS(E)(70) 755-0085-9-70 Pink Figure y GT5-1P-DS(E) GT5-1S-HU(E) Housing PBT - GT5-1P-DS( I )(70) - Black Figure u GT5-1P-DS( I ) GT5-1S-HU( I ) 0.64 x 1.1 Terminals Brass Tin plating GT5-1P-DS(J)(70) - Cream white Figure i GT5-1P-DS(J) GT5-1S-HU(J) Insulator PBT Dark gray GT5-1P-DS(K)(70) - Pastel orange Figure o GT5-1P-DS(K) GT5-1S-HU(K) Outer terminals Phosphor bronze Tin plating Part Number Panel YES 7.7 GT 19 GT 3 GT 6W BRecommended PCB Mounting Pattern Finish Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board thickness of 1.6 mm) for the mounting screws. * Eight types of keys are available. Please use a mating F connector housing of a matching key type. BFully Mated connector assemblies GT 10 GT 7 Figure u T=1.6 GT 14 GT5-1P-DS(70) GT 8 GT 15 GT 18W GT5E-1P-DS(70) GT 9 BRecommended PCB Mounting Pattern Part Number GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series 14 GT5E-1P-DS(70) CL No. 755-0092-4-70 Part Material Finish Housing PA Natural 0.64 x 1.1 Terminals Brass Tin plating Insulator PBT Dark gray Outer terminals Phosphor bronze Tin plating Lock pin Brass Tin plating Corresponding F Connector Housing RoHS GT5-1S-HU YES GT5R-1S-HU The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT5 Series GT 5 16.6 GT 13 F Connectors BKeying Configurations Housings GT 16 25 Figure w Figure e Figure r 1.2 PO5G 13.3 0.4 11.5 Figure q GT 11 CL No. Color Material Key polarizing USCAR-19 RoHS code Coding 755-0044-1 Light Gray Figure q D2 GT5-2S-HU(A) 755-0059-9 Brown Figure w A2 GT5-2S-HU(B) 755-0060-8 Green Figure e B2 GT5-2S-HU(C) 755-0097-8 Blue Figure r C2 GT5-2S-HU(D) 755-0098-0 Light Gray Figure q PBT GT5-2P/S-R YES BShown with inserted retainer. GT 19 GT5-2S-HU Note 1: Used with separate retainer (GT5-2P/S-R). Note 2: Please use a mating F connector of a matching key type. BRecommended Mounting Bracket dimensions. 17.75 0.6 1 1.52 4.75min. 5 2.8 Tin plating GT 10 CAV NO 4.2 7.8 9.8 6.8 1.6 1.5 1.3 14.5 21.8 8 5 41.4 1.2 GT5-2S-HU GT 8 BKeying Configurations GT 9 Key polarizing RoHS code Color 755-0045-4-70 Light Gray Figure q GT5-2PP-HU(A)(70) 755-0063-6-70 Brown Figure w GT5-2PP-HU(B)(70) 755-0064-9-70 Green Figure e YES Part Material GT5-2PP-HU(C)(70) 755-0099-3-70 ____ Blue Figure r Housing PBT - Light Gray Figure q Ground terminal Phosphor bronze Tin plating Figure q Figure w Finish Figure e Figure r GT 25 CL No. GT5-2PP-HU(70) GT5-2PP-HU(D)(70) GT 15 GT5-2P/S-R GT 18W BFully mated connector assemblies GT5-2P/S-R GT 7 30 25 GT 6W Housings[Panel Mounted Housing] GT 3 M Connectors Part Number GT 17 Part Number GT 14 25 Note1: Used with separate retainer (GT5-2P/S-R). Coding D2 at USCAR-19 is GT5-2PP-HU. Note2: Refer to page 27 for panel mounting in-line bracket. 15 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines Two-position type-Each Single-Conductor coaxial shielded cable The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 GT 13 Housing 18.8 GT 16 30 25 BFully Mated connector assemblies 41.4 GT 11 PO5G 13.4 15.8 GT5-2S-HU GT5-2P/S-R GT5-2P/S-R Part Number CL No. Material Color RoHS GT5N-2PP-HU 755-0055-8 PBT Light gray YES Retainer - 2 position (Used with GT5-2S-HU, GT5-2PP-HU, and GT5N-2PP-HU) CAV NO 2.8 GT 19 CL No. Material Color RoHS GT5-2P/S-R 755-0046-7 PBT Dark gray YES Housing 3 3 22.4 3 BKeying Configurations 3 GT 3 Part Number GT 7 GT 6W 14.8 10.9 GT 17 GT 14 Note :Used with separate retainer (GT5-2P/S-R). 18.8 GT 18W 4 14.15 GT 10 Figure q Figure w BRecommended Board Mounting Pattern Figure e Figure r BMounted and fully mated connector assemblies 5.45 7 7.7 21.3 GT 15 27.4 GT 8 GT 9 GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series Part Number CL No. Material Color Key polarizing USCAR-19 code Coding RoHS GT5-2P-DS(70) 755-0043-9-70 Light Gray Figure q D2 GT5-2P-DS(A)(70) 755-0061-0-70 Brown Figure w A2 GT5-2P-DS(B)(70) 755-0062-3-70 Green Figure e B2 GT5-2P-DS(C)(70) 755-0101-3-70 Blue Figure r C2 GT5-2P-DS(D)(70) 755-0102-6-70 Light Gray Figure q PBT YES Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board thickness of 1.6 mm) for the mounting screws. Coding D2 at USCAR-19 is GT5-2P-DS. 16 GT5-2P-DS (70) GT5-2P-DS (A)(70) GT5-2P-DS (B)(70) GT5-2P-DS (C)(70) Recommended Panel Cut-out The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT5 Series GT 5 GT 13 F Connector Terminals 2.8 GT 16 2.3 PO5G 19 GT 11 GT 14 GT 17 GT7A-2022SCF(70) 757-0003-7-70 Material Copper alloy Finish Tin plating Outer Diameter Packaging #20 to 22 1.4 to 2.4mm 5,000pcs.per reel #20 to 22 2.6 to 3.1mm 3,000pcs.per reel Conductor Size (AWG) RoHS GT 3 CL No. 757-0001-1-70 GT 19 Part Number GT7-2022SCF(70) YES Note 1: Sold by the reel. (See above table for number of Packaging.) Note 2: This component is used only with applicable HRS housings. GT 6W M Connector Terminals GT 7 2.8 1.9 2.7 GT 18W 20.7 GT 10 GT 15 GT 8 GT 9 CL No. GT7-2022PCF(70) 757-0002-4-70 GT7A-2022PCF(70) 757-0004-0-70 Material Brass Finish Tin plating Outer Diameter Packaging #20 to 22 1.4 to 2.4mm 5,000pcs.per reel #20 to 22 2.6 to 3.1mm 3,000pcs.per reel Conductor Size (AWG) RoHS YES GT 25 Part Number Note 1: Sold by the reel. (See above table for number of Packaging.) Note 2: This component is used only with applicable HRS housings. 17 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines Power Supply Terminals The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 GT 13 Combinaton Type (Two Single-Conductor Coaxial shielded Cables + One Power contact) F Connectors BShown with inserted retainer. 21.1 GT 16 Housing PO5G Retainer Part Number CL No. Material Color RoHS GT5-2/1S-HU 755-0009-0 PBT Light gray YES 10.8 Note : Used with separate retainer (GT5-2/1S-R). Retainer (exclusively for GT5-2/1S-HU) 16.6 17.28 Part Number CL No. Material Color RoHS GT5-2/1S-R 755-0003-4 PBT Dark gray YES M Connectors BRecommended Board Mounting Pattern 31.9 26.9 GT 18W GT 10 GT 7 GT 6W 2.8 GT 3 GT 19 GT 17 GT 14 GT 11 12.5 25 Connector assembly, Printed Circuit Board mounting For power supply 21.3 GT 15 23.3 For inner conductor GT 8 13.4 For outside conductor Thickness : 1.6mm Part Number CL No. RoHS GT5-2/1P-DS(70) 755-0014-0-70 YES Finish PBT Color: Light gray 0. 64x1.1 Terminal Brass Tin plating Insulator PBT Dark gray Outer terminal Phosphor bronze Tin plating Tub terminal for DS 070 Brass Tin plating Note: Use JIS B 1115 and 1122 class 4, nominal diameter 3, length 6 screws (for a board thickness of 1.6 mm) for the mounting screws. 18 13.3 0.3 26.9 Material 23.7 Part Housing 25 . R3 4- GT 9 BRecommended Panel Cut-out GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series Board The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT5 Series GT 5 GT 13 Housing - with External Ground GT 16 Retainer 17.75 5 GT 11 2.8 1 1.52 4.75min. Mounting bracket attachment side 755-0008-8-70 Material Finish PBT Color: Light gray Ground terminal Phosphor bronze Tin plating RoHS YES Tin plating finish 5 Note 1: Used with separate retainer (GT5-2/1PP-R ). Note 2: Refer to page 27 for panel mounting in-line bracket. 14.5 9.8 Part Housing GT 17 GT5-2/1PP-HU(70) CL No. 4.2 6.8 Part Number 7.8 1.6 1.5 GT 14 Outside ground connection PO5G BRecommended Mounting Bracket Dimensions 0.6 26.3 13.4 30 8 GT 19 Housing - without External Ground GT 3 13.4 15.8 Material Color RoHS PBT Light gray YES GT 10 CL No. 755-0013-8 GT 7 Part Number GT5N-2/1PP-HU GT 6W 23.3 30 25 Note : Used with separate retainer GT5-2/1PP-R. GT 15 16.6 15.36 GT 18W Retainer (Used with GT5N-2/1PP-HU and GT5-2/1PP-HU) 3.5 GT 8 GT 9 GT 25 GT5-2 / 1PP-R Part Number CL No. Material Color RoHS GT5-2/1PP-R 755-0010-0 PBT Dark gray YES 19 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines BShown with inserted retainer. M Connectors The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. BShown with inserted retainer. GT5-4P/S-R GT 16 33.6 F Connector 31.9 GT 5 GT 13 4-Position - Single conductor shielded Coaxial cable GT 14 GT 11 12.5 11.5 PO5G 25 Part Number CL No. Material Color GT5-4S-HU 755-0056-0 PBT Light gray USCAR-19 Coding RoHS D4 YES M Connector GT 19 GT 17 Note: Used with separate retainer (GT5-4P/S-R). CL No. Material Color 755-0057-3 PBT Light gray 31.9 Part Number GT5N-4PP-HU 8.5 USCAR-19 Coding RoHS D4 YES Note 1: The product should be used with a low-force insertion/withdrawal M connector terminal. Note 2: Used with separate retainer GT5-4P/S-R. Retainer (Used with GT5-4S-HU and GT5N-4PP-HU) 27.6 14.8 2.8 GT 8 20 13.8 16.2 GT 6W GT 7 GT 10 3 9.2 GT 15 GT 18W 30 21.5 14.6 1.2 GT 3 35.8 31.9 GT 9 GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series Part Number CL No. Material Color RoHS GT5-4P/S-R 755-0058-6 PBT Dark gray YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT5 Series GT 5 GT 13 Connector assembly, Printed Circuit Board Mounting GT 16 12.6 Lot No. Material Color / Finish PBT Brass PBT Phosphor bronze Light gray Tin plating Dark gray Tin plating GT 14 Item Housing 0.641.1Terminal Insulator Outer terminal 45.8 YES CAV NO GT 17 21.3 15.1 3 0.5 5.25 GT 19 10.6 PIN No 3 D4 14.3 755-0087-4-70 35.8 GT5-4P-DS(70) USCAR-19 RoHS Coding GT 11 CL No. 40.8 PO5G Part Number 4 GT 3 10 24 B Recommended Board Mounting Pattern GT 6W GT 7 For center conductors 14.2 2- For outer conductors R0 .5 GT 18W 0.3 GT 10 B Recommended Panel Cut-out GT 15 Panel Outline B Mounted and fully mated connector assemblies 36.2 GT 8 21.3 R3 GT 25 PCB GT 9 2- M3 Screw Board Panel 21 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines M Connector The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 GT 13 For Single Conductor Coaxial shielded Cable - Waterproof Type F Connector 36 Part Number CL No. Material Color RoHS GT5W-1S-HU 755-0027-2 PBT Light gray YES Note: Specific retainer is determined by the type of the cable used. Retainer (Used with GT5W-1PP-HU, GT5JW-1PP-HU, GT5W-1S-HU and GT5W-1P-HU) GT 6W GT 3 GT 19 GT 17 GT 14 GT 11 18.65 PO5G 16.6 GT 16 Housing GT 7 15.4 22 8.7 15.9 GT 10 GT 18W GT 15 GT 8 GT 9 GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series Part Number GT5W-1P/S-R CL No. 755-0028-5 Material Color PBT Dark gray Silicon rubber Compound Dark blue RoHS YES Note: Outer diameter of the cable must be within 2.9 to 3.4 mm. Consult nearest HRS representative for other diameters. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT5 Series GT 5 34 GT 13 GT 16 18.4 Housing Material Color PBT Light gray Connector seal Silicon rubber Compound White RoHS YES Note: Use correct retainer. GT 19 Housings - Bracket Mounting GT 17 755-0026-0 Part Housing GT 14 GT5W-1P-HU CL No. GT 11 18.2 PO5G Part Number GT 3 GT 6W GT 7 GT 10 Please check elsewhere for information about the bracket for GT5JW-1PP-HU. GT 18W BMounted and fully mated connector assemblies BRecommended Bracket Dimensions Diagram(for GT5W-1PP-HU) GT 15 GT 8 GT 9 Part Material Color 755-0070-1 Housing PBT Light gray GT5JW-1PP-HU 755-0069-2 Connector seal Silicon rubber Compound White Part Number RoHS GT 25 CL No. GT5W-1PP-HU YES 23 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines M Connectors The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. G Terminals 6.3 For Direct Coaxial Shielded Cable Termination 2.5 GT 5 GT 13 14.6 10.8 3 GT 16 9.3 0.4 0.6 1.2 PO5G 2.8 2.3 6.9 BBoard Termination Pattern 1 Lands GT 11 1 9Termination cross section BRecommended Completed 28 1.9 GT 17 GT 14 1.5D-2V or equivalent Part Number CL No. Material Finish GTA-1.6CF (70) 755-0032-2 -70 Brass Tin plating Packaging R1 RoHS 1,500 pcs. Per reel YES 7 2 3.5 GT 19 BCompleted Termination cross section 3.5 1.5D-2V or equivalent GT 3 Presolder GT 6W 3.5 Heat-shrink tubing Part Number CL No. Material Finish GTB-1.6CF(70) 755-0049-5-70 Brass Tin plating Packaging RoHS 1,500 pcs. Per reel YES GT 18W GT 10 GT 7 BBoard Termination Pattern 3.5 GT 15 BCompleted Termination cross section 1.9 1.5D-2V or equivalent 6.9 6.3 GT 8 R 1 3 7 3.5 Heat-shrink tubing GT 9 10.6 2.9 2.3 Lands 0.4 Part Number CL No. Material Finish G-1.6PCF(70) 755-0029-8-70 Brass Tin plating Packaging RoHS 1,500 pcs. Per reel YES 1.2 BBoard Termination Pattern 7 24 2 2 GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT5 Series 2.5 6.15 0.25 GT 5 0.25 GT 13 10.5 15 2 0.25 5.25 3 GT 16 0.8 0.5 BRecommended Board Termination Pattern 9 Lands 1 3.3 BCompleted Termination Cross Section 1.9 GT 11 Pre-solder R1 GT 14 Part Number CL No. Material Finish GTA-0.7CF 755-0074-2 Brass Tin plating Packaging RoHS 2.8 1,500 pcs. Per reel YES 3.5 GT 17 13.6 9.8 2.8 0.15 0.25 GT 19 8.55 0.25 0.5 1.1 Pre-solder GT 7 Lands CL No. Material Finish 755-0075-5 Brass Tin plating Packaging RoHS 1,500 pcs. Per reel YES R1 Lands GTB-0.7CF GT 6W BRecommended Board Termination Pattern 1.9 2.6 2.4 BRecommended Completed Termination cross 1.8 1.9 section GT 3 4.75 2.4 2.5 0.8 0.5 1.5 Part Number PO5G 3 0.6 1.2 2.9 R0. 0.7 3.5 0.7D equivalent GT 10 7.4 GT 18W GT 15 GT 8 BRecommended Board Termination Pattern GT 9 BRecommended Completed Termination cross section GT 25 Part Number CL No. Material Finish Packaging RoHS GTE-3.7CF 755-0122-3 Brass Tin plating 1,100 pcs. Per reel YES 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines For Direct Coaxial Cable Termination The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. A 6 GT 16 5 PO5G 0.6 C Raised point of contact GT 11 3 8 3.5 0.2 R1 6 T-0.4 Part Number CL No. Material Finish Packaging RoHS GT-1.6PG-C(70) 755-0031-0-70 Brass Tin plating 1 YES BAttachment Diagram Panel GT 14 GT 17 4.6 For use with coaxial cables 2.9 to 3.4 mm. outside diameter. Setscrew (M2.5) 5.4 For Improved Electronic Noise Compatibility 5 GT 6W 2.63 GT 3 GT 19 Bottom Shield cover 3.3 GT 7 5.6 Part Number CL No. Material Finish RoHS GT5-1P/S-CSB(70) 755-0048-2-70 Brass Tin plating YES Top Shield cover 6.45 GT 9 GT 8 R1. 6 GT 15 GT 18W GT 10 Mounted Condition Installed Mounted Condition Installed 26 34 5 (0 .25 ) 8.2 6.5 2.5 2.5 B (0.52) B C 7.5 A GT 13 GT 5 BRecommended Panel Cut-out For Mid-Cable Termination GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series Part Number CL No. Material Finish RoHS GT5C-1P-CSB( 70) 755-0088-7-70 Brass Tin plating YES 5.6 T=0.25 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT5 Series GT 5 4.5 9.8 GT 13 24.5 GT 16 7.5 PO5G 12 8 751-0039-6-70 Material SPCC Finish Tin plating Used with connectors YES GT 19 GT5-1PP-HU(70), GT5-1PP-HU(B)(70) GT5-1PP-HU(A)(70), GT5-1PP-HU(D)(70) GT5-1PP-HU(C)(70), GT5-1PP-HU(I)(70) GT5-1PP-HU(E)(70), GT5-1PP-HU(K)(70) GT5-1PP-HU(J)(70), GT5-2PP-HU(70) GT5-2/1PP-HU(70), GT5-2PP-HU(B)(70) GT5-2PP-HU(A)(70), GT5-2PP-HU(D)(70) GT5-2PP-HU(C)(70) RoHS GT 17 GT-BK(70) CL No. 1.1 GT 14 Part Number GT 11 T=1 GT 3 B Termination Tools User's manuals are available. Please ask your Hirose Electric account representative. GT 6W Automatic crimping machine Item Specification 1.5tons Stroke length 30mm Number of strokes 200spm(50Hz) 75kg Motor 0.2kW Crimping speed GT 8 * Crimp height setting tables are available for each cable type. Please contact your nearest Hirose Electric account representative. Different cables will require different crimp height settings. AC100V GT 15 Part Number CM-105 2000 to 4000pcs. Per hour 200spm(60Hz) GT 18W Weight Remarks GT 10 Specification GT 7 Specifications GT 9 GT 25 27 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines Panel Mounting In-line Bracket The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. GT 5 GT 13 GT 16 Harnes Tool Name of Applicabe Terminal GT5-30/0.7-1.5PCF(70) GT5-30/0.7-1.5SCF(70) GT5-2428/1.1-2.2SCF GT5-2428/1.6-2.5PCF(70) GT5-2428/1.6-2.5SCF(70) GT 11 PO5G GT5-30/1.6-2.9PCF(70) GT5-30/1.6-2.9SCF(70) GT5-2428/1.6-2.9PCF(70) GT 19 GT 17 GT 14 GT5-2428/1.6-2.9SCF(70) GT5-2022/1.6-2.9SCF(70) GT5-2022/F2.7-3.5PCF(70) GT5-2022/F2.7-3.5SCF(70) GT5-2022/F3.3-3.8PCF(70) GT5-2022/F3.3-3.8SCF(70) GT5-2428/F3.3-5PCF(70) GT5-2428/F3.3-5SCF(70) GT5-2022/F3.3-5PCF(70) GT 9 GT 8 GT 15 GT 18W GT 10 GT 7 GT 6W GT 3 GT5-2022/F3.3-5SCF(70) GT 25 Coaxial cable connection of Antennas, Sensors, and Communication Trunk Lines GT5 Series 28 GT5-30/F4-5PCF(70) GT5-30/F4-5SCF(70) GT5-2428/F4-5PCF(70) GT5-2428/F4-5SCF(70) GT5-2022/F4-5PCF(70) GT5-2022/F4-5SCF(70) G-1.6PCF(70) GTA-0.7CF GTB-0.7CF GTA-1.6CF(70) GTB-1.6CF(70) Name of Applicabe Applicator AP105-GT5-30/0.7-1.5P AP105-GT5-30/0.7-1.5S AP105-GT5-2428/1.1-2.2S-ID AP105-GT5-2428/1.6-2.5P AP105-GT5-2428/1.6-2.5S AP105-GT5-30/1.6-2.9P-ID AP105-GT5-30/1.6-2.9P AP105-GT5-30/1.6-2.9P-A AP105-GT5-30/1.6-2.9S-ID AP105-GT5-30/1.6-2.9S AP105-GT5-2428/1.6-2.9P AP105-GT5-2428/1.6-2.9PWS AP105-GT5-2428/1.6-2.9P-B AP105-GT5-2428/1.6-2.9S AP105-GT5-2428/1.6-2.9SWS AP105-GT5-2428/1.6-2.9S-B AP105-GT5-2022/1.6-2.9S AP105-GT5-2022/F2.7-3.5P AP105-GT5-2022/F2.7-3.5S AP105-GT5-2022/F3.3-3.8P AP105-GT5-2022/F3.3-3.8S AP105-GT5-2428/F3.3-5P-ID AP105-GT5-2428/F3.3-5S-ID AP105-GT5-2022/F3.3-5P-ID AP105-GT5-2022/F3.3-5P AP105-GT5-2022/F3.3-5P2.2D-ID AP105-GT5-2022/F3.3-5S-ID AP105-GT5-2022/F3.3-5S AP105-GT5-2022/F3.3-5S2.2D-ID AP105-GT5-30/F4-5P-ID AP105-GT5-30/F4-5S-ID AP105-GT5-2428/F4-5P-ID AP105-GT5-2428/F4-5P-3C2V AP105-GT5-2428/F4-5S-ID AP105-GT5-2428/F4-5S-3C2V AP105-GT5-2022/F4-5P-ID AP105-GT5-2022/F4-5P AP105-GT5-2022/F4-5P-18ID AP105-GT5-2022/F4-5P-RG58 AP105-GT5-2022/F4-5S-ID AP105-GT5-2022/F4-5S AP105-GT5-2022/F4-5S-18ID AP105-GT5-2022/F4-5S-RG58 AP105-G-1.6P AP105-GTA . B-0.7P AP105-GTA . B-0.7P AP105-GTA . B-1.6P AP105-GTA . B-1.6P CL No. CL901-5021-8 CL901-5080-7 CL901-5171-0 CL901-5100-2 CL901-5101-5 CL901-5019-6 CL901-5017-0 CL901-5040-2 CL901-5020-5 CL901-5018-3 CL901-5029-0 CL901-5031-1 CL901-5103-0 CL901-5030-9 CL901-5032-4 CL901-5104-3 CL901-5088-9 CL901-5091-3 CL901-5092-6 CL901-5075-7 CL901-5076-0 CL901-5037-8 CL901-5038-0 CL901-5058-8 CL901-5059-0 CL901-5070-3 CL901-5060-0 CL901-5061-2 CL901-5071-6 CL901-5033-7 CL901-5034-0 CL901-5035-2 CL901-5056-2 CL901-5036-5 CL901-5057-5 CL901-5054-7 CL901-5052-1 CL901-5121-2 CL901-5105-6 CL901-5055-0 CL901-5053-4 CL901-5102-8 CL901-5106-9 CL901-5041-5 CL901-5047-1 CL901-5047-1 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: AP105-GT5-2022/F3.3-3.8P AP105-GT5-2022/F3.3-3.8S AP105-GT5-2022/F3.3-5P AP105-GT5-2022/F3.3-5P(01 AP105-GT5-2022/F3.3-5P(69 AP105-GT5-2022/F3.3-5P(70 AP105-GT5-2022/F3.3-5P-ID AP105-GT5-2022/F3.3-5S AP105-GT5-2022/F3.3-5S(01 AP105-GT5-2022/F3.3-5S(69 AP105-GT5-2022/F3.3-5S(70 AP105-GT5-2022/F3.3-5SID AP105-GT5-2022/F4-5P AP105-GT5-2022/F4-5P(61) AP105-GT5-2022/F4-5P(62) AP105-GT5-2022/F4-5P(63) AP105-GT5-2022/F4-5P(64) AP105-GT5-2022/F4-5P(65) AP105-GT5-2022/F4-5P(66) AP105-GT5-2022/F4-5P(67) AP105-GT5-2022/F4-5P(68) AP105-GT5-2022/F4-5P-18ID AP105-GT5-2022/F4-5S AP105-GT5-2022/F4-5S(61) AP105-GT5-2022/F4-5S(62) AP105-GT5-2022/F4-5S(63) AP105-GT5-2022/F4-5S(64) AP105-GT5-2022/F4-5S(65) AP105-GT5-2022/F4-5S(66) AP105-GT5-2022/F4-5S(67) AP105-GT5-2022/F4-5S(68) AP105-GT5-2022/F4-5S-18ID AP105-GT5-2428/1.6-2.5S AP105-GT5-2428/1.6-2.9P AP105-GT5-2428/1.6-2.9PWS AP105-GT5-2428/1.6-2.9S AP105-GT5-2428/1.6-2.9SWS AP105-GT5-2428/F4-5P-3C2V AP105-GT5-2428/F4-5P-ID AP105-GT5-2428/F4-5S3C2V AP105-GT5-2428/F4-5S-ID AP105-GT5-30/0.7-1.5P AP105-GT5-30/0.7-1.5P(01) AP105-GT5-30/0.7-1.5P(61) AP105-GT5-30/0.7-1.5P(62) AP105-GT5-30/0.7-1.5P(63) AP105-GT5-30/0.7-1.5P(64) AP105-GT5-30/0.7-1.5P(65) AP105-GT5-30/0.7-1.5P(66) AP105-GT5-30/0.7-1.5P(67) AP105-GT5-30/0.7-1.5P(68) AP105-GT5-30/0.7-1.5P(69) AP105-GT5-30/0.7-1.5S AP105-GT5-30/0.7-1.5S(61) AP105-GT5-30/0.7-1.5S(62) AP105-GT5-30/0.7-1.5S(63) AP105-GT5-30/0.7-1.5S(64) AP105-GT5-30/0.7-1.5S(65) AP105-GT5-30/0.7-1.5S(66) AP105-GT5-30/0.7-1.5S(67) AP105-GT5-30/0.7-1.5S(68) AP105-GT5-30/1.6-2.9P AP105-GT5-30/1.6-2.9P(01) AP105-GT5-30/1.6-2.9P(61) AP105-GT5-30/1.6-2.9P(62) AP105-GT5-30/1.6-2.9P(63) AP105-GT5-30/1.6-2.9P(64) AP105-GT5-30/1.6-2.9P(65) AP105-GT5-30/1.6-2.9P(66) AP105-GT5-30/1.6-2.9P(67) AP105-GT5-30/1.6-2.9P(68) AP105-GT5-30/1.6-2.9P(69) AP105-GT5-30/1.6-2.9P(70) AP105-GT5-30/1.6-2.9P-ID AP105-GT5-30/1.6-2.9S AP105-GT5-30/1.6-2.9S(01) AP105-GT5-30/1.6-2.9S(61) AP105-GT5-30/1.6-2.9S(62) AP105-GT5-30/1.6-2.9S(63) AP105-GT5-30/1.6-2.9S(64) AP105-GT5-30/1.6-2.9S(65) AP105-GT5-30/1.6-2.9S(66) AP105-GT5-30/1.6-2.9S(67) AP105-GT5-30/1.6-2.9S(68) AP105-GT5-30/1.6-2.9S(69) AP105-GT5-30/1.6-2.9S(70) AP105-GT5-30/1.6-2.9S-ID AP105-GT5-30/F4-5P-ID AP105-GT5-30/F4-5P-ID(01) AP105-GT5-30/F4-5P-ID(61) AP105-GT5-30/F4-5P-ID(62) AP105-GT5-30/F4-5P-ID(63) AP105-GT5-30/F4-5P-ID(64) AP105-GT5-30/F4-5P-ID(65) AP105-GT5-30/F4-5P-ID(66) AP105-GT5-30/F4-5PID(67) AP105-GT5-30/F4-5P-ID(68) AP105-GT5-30/F4-5P-ID(69) AP105-GT5-30/F4-5P-ID(70) AP105-GT5-30/F45S-ID