74LVC1G17 Single Schmitt trigger buffer Rev. 06 -- 27 August 2007 Product data sheet 1. General description The 74LVC1G17 provides a buffer function with Schmitt trigger action. It is capable of transforming slowly changing input signals into sharply defined outputs. The input can be driven from either 3.3 V or 5 V devices. This feature allows the use of this device in a mixed 3.3 V and 5 V environment. This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the damaging backflow current through the device when it is powered down. 2. Features Wide supply voltage range from 1.65 V to 5.5 V High noise immunity Complies with JEDEC standard JESD8-7 (1.65 V to 1.95 V) JESD8-5 (2.3 V to 2.7 V) JESD8B/JESD36 (2.7 V to 3.6 V) 24 mA output drive (VCC = 3.0 V) CMOS low power consumption Latch-up performance exceeds 250 mA Direct interface with TTL levels Unlimited rise and fall times Inputs accept voltages up to 5 V Multiple package options ESD protection: HBM JESD22-A114E exceeds 2000 V MM JESD22-A115-A exceeds 200 V Specified from -40 C to +125 C 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name Description Version 74LVC1G17GW -40 C to +125 C TSSOP5 plastic thin shrink small outline package; 5 leads; body width 1.25 mm SOT353-1 74LVC1G17GV -40 C to +125 C SC-74A plastic surface-mounted package; 5 leads SOT753 74LVC1G17GM -40 C to +125 C XSON6 plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm SOT886 74LVC1G17GF -40 C to +125 C XSON6 plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm SOT891 4. Marking Table 2. Marking codes Type number Marking 74LVC1G17GW VJ 74LVC1G17GV V17 74LVC1G17GM VJ 74LVC1G17GF VJ 5. Functional diagram 2 A Y 4 2 mnb150 4 mnb151 Fig 1. Logic symbol Fig 2. IEC logic symbol A Y mnb152 Fig 3. Logic diagram 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 2 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer 6. Pinning information 6.1 Pinning 74LVC1G17 74LVC1G17 n.c. 1 A 2 GND 3 5 4 n.c. 1 6 VCC A 2 5 n.c. 74LVC1G17 VCC GND Y 4 3 Y n.c. 1 6 VCC A 2 5 n.c. GND 3 4 Y 001aaf191 001aaf190 Transparent top view Fig 4. Pin configuration SOT353-1 and SOT753 Fig 5. Pin configuration SOT886 001aaf402 Transparent top view Fig 6. Pin configuration SOT891 6.2 Pin description Table 3. Pin description Symbol Pin Description SOT353-1/SOT753 SOT886/SOT891 n.c. 1 1, 5 not connected A 2 2 data input GND 3 3 ground (0 V) Y 4 4 data output VCC 5 6 supply voltage 7. Functional description Table 4. Function table[1] Input Output A Y L L H H [1] H = HIGH voltage level; L = LOW voltage level 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 3 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer 8. Limiting values Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V). Symbol Parameter VCC supply voltage IIK input clamping current VI input voltage IOK output clamping current Conditions VI < 0 V [1] IO output current ICC supply current IGND ground current Ptot total power dissipation Tstg storage temperature Max Unit -0.5 +6.5 V -50 - mA -0.5 +6.5 V - 50 mA Active mode [1][2] -0.5 VCC + 0.5 V Power-down mode [1][2] -0.5 +6.5 V - 50 mA - 100 mA -100 - mA - 250 mW -65 +150 C VO > VCC or VO < 0 V output voltage VO Min VO = 0 V to VCC Tamb = -40 C to +125 C [3] [1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed. [2] When VCC = 0 V (Power-down mode), the output voltage can be 5.5 V in normal operation. [3] For TSSOP5 and SC-74A packages: above 87.5 C the value of Ptot derates linearly with 4.0 mW/K. For XSON6 packages: above 45 C the value of Ptot derates linearly with 2.4 mW/K. 9. Recommended operating conditions Table 6. Recommended operating conditions Symbol Parameter VCC Min Typ Max Unit supply voltage 1.65 - 5.5 V VI input voltage 0 - 5.5 V VO output voltage Tamb Conditions Active mode 0 - VCC V VCC = 0 V; Power-down mode 0 - 5.5 V -40 - +125 C Typ[1] Max Unit ambient temperature 10. Static characteristics Table 7. Static characteristics At recommended operating conditions. Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions Min Tamb = -40 C to +85 C VOH HIGH-level output voltage VI = VCC or GND IO = -100 A; VCC = 1.65 V to 5.5 V VCC - 0.1 - - V IO = -4 mA; VCC = 1.65 V 1.2 - V IO = -8 mA; VCC = 2.3 V 1.9 - - V IO = -12 mA; VCC = 2.7 V 2.2 - - V IO = -24 mA; VCC = 3.0 V 2.3 - - V IO = -32 mA; VCC = 4.5 V 3.8 - - V 74LVC1G17_6 Product data sheet - (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 4 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer Table 7. Static characteristics ...continued At recommended operating conditions. Voltages are referenced to GND (ground = 0 V). Symbol Parameter Conditions VOL VI = VCC or GND LOW-level output voltage IO = 100 A; VCC = 1.65 V to 5.5 V Min Typ[1] Max Unit - - 0.1 V IO = 4 mA; VCC = 1.65 V - - 0.45 V IO = 8 mA; VCC = 2.3 V - - 0.3 V IO = 12 mA; VCC = 2.7 V - - 0.4 V IO = 24 mA; VCC = 3.0 V - - 0.55 V IO = 32 mA; VCC = 4.5 V - - 0.55 V - 0.1 5 A power-off leakage current VI or VO = 5.5 V; VCC = 0 V - 0.1 10 A ICC supply current VI = 5.5 V or GND; VCC = 1.65 V to 5.5 V; IO = 0 A - 0.1 10 A ICC additional supply current VI = VCC - 0.6 V; IO = 0 A; VCC = 2.3 V to 5.5 V; per pin - 5 500 A CI input capacitance - 5 - pF IO = -100 A; VCC = 1.65 V to 5.5 V VCC - 0.1 - - V IO = -4 mA; VCC = 1.65 V 0.95 - V II input leakage current IOFF VI = 5.5 V or GND; VCC = 0 V to 5.5 V Tamb = -40 C to +125 C VOH HIGH-level output voltage VI = VCC or GND LOW-level output voltage VOL II input leakage current - IO = -8 mA; VCC = 2.3 V 1.7 - - V IO = -12 mA; VCC = 2.7 V 1.9 - - V IO = -24 mA; VCC = 3.0 V 2.0 - - V IO = -32 mA; VCC = 4.5 V 3.4 - - V IO = 100 A; VCC = 1.65 V to 5.5 V - - 0.1 V IO = 4 mA; VCC = 1.65 V - - 0.7 V IO = 8 mA; VCC = 2.3 V - - 0.45 V VI = VCC or GND IO = 12 mA; VCC = 2.7 V - - 0.6 V IO = 24 mA; VCC = 3.0 V - - 0.80 V IO = 32 mA; VCC = 4.5 V - - 0.80 V - - 100 A VI = 5.5 V or GND; VCC = 0 V to 5.5 V IOFF power-off leakage current VI or VO = 5.5 V; VCC = 0 V - - 200 A ICC supply current VI = 5.5 V or GND; VCC = 1.65 V to 5.5 V; IO = 0 A - - 200 A ICC additional supply current per pin; VI = VCC - 0.6 V; IO = 0 A; VCC = 2.3 V to 5.5 V - - 5000 A [1] All typical values are measured at maximum VCC and Tamb = 25 C. 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 5 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer Table 8. Transfer characteristics At recommended operating conditions. Voltages are referenced to GND (ground = 0 V). Symbol Parameter positive-going threshold voltage VT+ negative-going threshold voltage VT- -40 C to +125 C Unit Min Typ[1] Max Min Max VCC = 1.8 V 0.82 1.0 1.14 0.79 1.14 V VCC = 2.3 V 1.03 1.2 1.40 1.00 1.40 V VCC = 3.0 V 1.29 1.5 1.71 1.26 1.71 V VCC = 4.5 V 1.84 2.1 2.36 1.81 2.36 V VCC = 5.5 V 2.19 2.5 2.79 2.16 2.79 V see Figure 7 and Figure 8 see Figure 7 and Figure 8 VCC = 1.8 V 0.46 0.6 0.75 0.46 0.78 V VCC = 2.3 V 0.65 0.8 0.96 0.65 0.99 V VCC = 3.0 V 0.88 1.0 1.24 0.88 1.27 V VCC = 4.5 V 1.32 1.5 1.84 1.32 1.87 V VCC = 5.5 V 1.58 1.8 2.24 1.58 2.27 V VCC = 1.8 V 0.26 0.4 0.51 0.19 0.51 V VCC = 2.3 V 0.28 0.4 0.57 0.22 0.57 V VCC = 3.0 V 0.31 0.5 0.64 0.25 0.64 V VCC = 4.5 V 0.40 0.6 0.77 0.34 0.77 V VCC = 5.5 V 0.47 0.6 0.88 0.41 0.88 V hysteresis voltage see Figure 7, Figure 8 and Figure 9 VH [1] -40 C to +85 C Conditions All typical values are measured at Tamb = 25 C. 10.1 Transfer characteristic waveforms VO VI VT+ VT- VI VH VT- VT+ Fig 7. Transfer characteristic VO mnb155 mnb154 Fig 8. Definitions of VT+, VT- and VH 74LVC1G17_6 Product data sheet VH (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 6 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer mna641 10 ICC (mA) 8 6 4 2 0 1 0 2 VI (V) 3 VCC = 3.0 V Fig 9. Typical transfer characteristics 11. Dynamic characteristics Table 9. Dynamic characteristics Voltages are referenced to GND (ground = 0 V). For test circuit see Figure 11. Symbol Parameter propagation delay tpd -40 C to +85 C Conditions Min Max Min Max VCC = 1.65 V to 1.95 V 1.0 4.1 11.0 1.0 14.0 ns VCC = 2.3 V to 2.7 V 0.7 2.8 6.5 0.7 8.5 ns VCC = 2.7 V 0.7 3.2 6.5 0.7 8.5 ns VCC = 3.0 V to 3.6 V 0.7 3.0 5.5 0.7 7.0 ns 0.7 2.2 5.0 0.7 6.5 ns - 16.6 - - - pF A to Y; see Figure 10 [2] VCC = 4.5 V to 5.5 V power dissipation capacitance CPD -40 C to +125 C Unit Typ[1] VI = GND to VCC; VCC = 3.3 V [3] [1] Typical values are measured at Tamb = 25 C and VCC = 1.8 V, 2.5 V, 2.7 V, 3.3 V and 5.0 V respectively. [2] tpd is the same as tPLH and tPHL. [3] CPD is used to determine the dynamic power dissipation (PD in W). PD = CPD x VCC2 x fi x N + (CL x VCC2 x fo) where: fi = input frequency in MHz; fo = output frequency in MHz; CL = output load capacitance in pF; VCC = supply voltage in V; N = number of inputs switching; (CL x VCC2 x fo) = sum of outputs. 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 7 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer 12. Waveforms VI VM A input GND t PHL t PLH VOH VM Y output VOL mnb153 Measurement points are given in Table 10. VOL and VOH are typical output voltage levels that occur with the output load. Fig 10. The input A to output Y propagation delay times Table 10. Measurement points Supply voltage Input Output VCC VM VM 1.65 V to 1.95 V 0.5 x VCC 0.5 x VCC 2.3 V to 2.7 V 0.5 x VCC 0.5 x VCC 2.7 V 1.5 V 1.5 V 3.0 V to 3.6 V 1.5 V 1.5 V 4.5 V to 5.5 V 0.5 x VCC 0.5 x VCC VEXT VCC VI RL VO G DUT RT CL RL mna616 Test data is given in Table 11. Definitions for test circuit: RL = Load resistance. CL = Load capacitance including jig and probe capacitance. RT = Termination resistance should be equal to the output impedance Zo of the pulse generator. VEXT = External voltage for measuring switching times. Fig 11. Load circuitry for switching times 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 8 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer Table 11. Test data Supply voltage Input Load VEXT VCC VI tr = t f CL RL tPLH, tPHL 1.65 V to 1.95 V VCC 2.0 ns 30 pF 1 k open 2.3 V to 2.7 V VCC 2.0 ns 30 pF 500 open 2.7 V 2.7 V 2.5 ns 50 pF 500 open 3.0 V to 3.6 V 2.7 V 2.5 ns 50 pF 500 open 4.5 V to 5.5 V VCC 2.5 ns 50 pF 500 open 13. Application information mnb156 50 ICC (mA) (1) 40 30 20 (2) 10 0 2 3 4 5 VCC (V) 6 Linear change of VI between 0.8 V to 2.0 V. (1) Positive-going edge. (2) Negative-going edge. Fig 12. Average supply current as a function of supply voltage 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 9 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer 14. Package outline TSSOP5: plastic thin shrink small outline package; 5 leads; body width 1.25 mm E D SOT353-1 A X c y HE v M A Z 5 4 A2 A (A3) A1 1 Lp 3 L e w M bp detail X e1 0 1.5 3 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max. A1 A2 A3 bp c D(1) E(1) e e1 HE L Lp v w y Z(1) mm 1.1 0.1 0 1.0 0.8 0.15 0.30 0.15 0.25 0.08 2.25 1.85 1.35 1.15 0.65 1.3 2.25 2.0 0.425 0.46 0.21 0.3 0.1 0.1 0.60 0.15 7 0 Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT353-1 REFERENCES IEC JEDEC JEITA MO-203 SC-88A EUROPEAN PROJECTION ISSUE DATE 00-09-01 03-02-19 Fig 13. Package outline SOT353-1 (TSSOP5) 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 10 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer Plastic surface-mounted package; 5 leads SOT753 D E B y A X HE 5 v M A 4 Q A A1 c 1 2 3 Lp detail X bp e w M B 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A A1 bp c D E e HE Lp Q v w y mm 1.1 0.9 0.100 0.013 0.40 0.25 0.26 0.10 3.1 2.7 1.7 1.3 0.95 3.0 2.5 0.6 0.2 0.33 0.23 0.2 0.2 0.1 OUTLINE VERSION REFERENCES IEC JEDEC SOT753 JEITA SC-74A EUROPEAN PROJECTION ISSUE DATE 02-04-16 06-03-16 Fig 14. Package outline SOT753 (SC-74A) 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 11 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm SOT886 b 1 2 3 4x (2) L L1 e 6 5 4 e1 e1 6x A (2) A1 D E terminal 1 index area 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A (1) max A1 max b D E e e1 L L1 mm 0.5 0.04 0.25 0.17 1.5 1.4 1.05 0.95 0.6 0.5 0.35 0.27 0.40 0.32 Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. OUTLINE VERSION SOT886 REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 04-07-15 04-07-22 MO-252 Fig 15. Package outline SOT886 (XSON6) 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 12 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1 x 0.5 mm 1 SOT891 b 3 2 4x (1) L L1 e 6 5 4 e1 e1 6x A (1) A1 D E terminal 1 index area 0 1 2 mm scale DIMENSIONS (mm are the original dimensions) UNIT A max A1 max b D E e e1 L L1 mm 0.5 0.04 0.20 0.12 1.05 0.95 1.05 0.95 0.55 0.35 0.35 0.27 0.40 0.32 Note 1. Can be visible in some manufacturing processes. OUTLINE VERSION REFERENCES IEC JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 05-04-06 07-05-15 SOT891 Fig 16. Package outline SOT891 (XSON6) 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 13 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer 15. Abbreviations Table 12. Abbreviations Acronym Description CMOS Complementary Metal Oxide Semiconductor DUT Device Under Test ESD ElectroStatic Discharge HBM Human Body Model MM Machine Model TTL Transistor-Transistor Logic 16. Revision history Table 13. Revision history Document ID Release date Data sheet status Change notice Supersedes 74LVC1G17_6 20070827 Product data sheet - 74LVC1G17_5 Modifications: * In Section 10 "Static characteristics", changed conditions for input leakage and supply current. * Figure 16 "Package outline SOT891 (XSON6)" updated. 74LVC1G17_5 20061006 Product data sheet - 74LVC1G17_4 74LVC1G17_4 20041130 Product specification - 74LVC1G17_3 74LVC1G17_3 20041018 Product specification - 74LVC1G17_2 74LVC1G17_2 20040407 Product specification - 74LVC1G17_1 74LVC1G17_1 20040324 Product specification - - 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 14 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer 17. Legal information 17.1 Data sheet status Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objective specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. [1] Please consult the most recently issued document before initiating or completing a design. [2] The term `short data sheet' is explained in section "Definitions". [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. 17.2 Definitions Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. 17.3 Disclaimers General -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in medical, military, aircraft, space or life support equipment, nor in applications where failure or malfunction of a NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) may cause permanent damage to the device. Limiting values are stress ratings only and operation of the device at these or any other conditions above those given in the Characteristics sections of this document is not implied. Exposure to limiting values for extended periods may affect device reliability. Terms and conditions of sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, including those pertaining to warranty, intellectual property rights infringement and limitation of liability, unless explicitly otherwise agreed to in writing by NXP Semiconductors. In case of any inconsistency or conflict between information in this document and such terms and conditions, the latter will prevail. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. 17.4 Trademarks Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners. 18. Contact information For additional information, please visit: http://www.nxp.com For sales office addresses, send an email to: salesaddresses@nxp.com 74LVC1G17_6 Product data sheet (c) NXP B.V. 2007. All rights reserved. Rev. 06 -- 27 August 2007 15 of 16 74LVC1G17 NXP Semiconductors Single Schmitt trigger buffer 19. Contents 1 2 3 4 5 6 6.1 6.2 7 8 9 10 10.1 11 12 13 14 15 16 17 17.1 17.2 17.3 17.4 18 19 General description . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Functional diagram . . . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 3 Pinning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . 3 Functional description . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 4 Recommended operating conditions. . . . . . . . 4 Static characteristics. . . . . . . . . . . . . . . . . . . . . 4 Transfer characteristic waveforms. . . . . . . . . . . 6 Dynamic characteristics . . . . . . . . . . . . . . . . . . 7 Waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Application information. . . . . . . . . . . . . . . . . . . 9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . 10 Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 14 Legal information. . . . . . . . . . . . . . . . . . . . . . . 15 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 15 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Contact information. . . . . . . . . . . . . . . . . . . . . 15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'. (c) NXP B.V. 2007. All rights reserved. For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 27 August 2007 Document identifier: 74LVC1G17_6