FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0
July 2009
FOD410, FOD4108, FOD4116, FOD4118
6-Pin DIP Zero-Cross Triac Drivers
Features
■
300mA on-state current
■
Zero-voltage crossing
■
High blocking voltage
– 800V (FOD4108, FOD4118)
– 600V (FOD410, FOD4116)
■
High trigger sensitivity
– 1.3mA (FOD4116, FOD4118)
– 2mA (FOD410, FOD4108)
■
High static dv/dt (10,000V/µs)
■
UL, VDE, CSA approved
■
Lead free assembly
Applications
■
Solid-state relays
■
Industrial controls
■
Lighting controls
■
Static power switches
■
AC motor starters
Description
The FOD410, FOD4108, FOD4116 and FOD4118
devices consist of an infrared emitting diode coupled to a
hybrid triac formed with two inverse parallel SCRs which
form the triac function capable of driving discrete triacs.
The FOD4116 and FOD4118 utilize a high efficiency
infrared emitting diode which offers an improved trigger
sensitivity. These devices are housed in a standard 6-pin
dual in-line (DIP) package.
PackageSchematic
6
1
6
1
6
1
MAIN TERM.
NC*
N/C
*DO NOT CONNECT
(TRIAC SUBSTRATE)
1
2
3
ANODE
CATHODE
4
5
6MAIN TERM.
ZERO
CROSSING
CIRCUIT
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 2
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
Absolute Maximum Ratings
(T
A
= 25°C unless otherwise noted)
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be
operable above the recommended operating conditions and stressing the parts to these levels is not recommended.
In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability.
The absolute maximum ratings are stress ratings only.
Note:
1. Isolation voltage, V
ISO
, is an internal device dielectric breakdown rating. For this test, Pins 1, 2 and 3 are common,
and Pins 4, 5 and 6 are common. 5,000 VRMS for 1 minute duration is equivalent to 6,000 VRMS for 1 second
duration.
Symbol Parameters Device Value Units
TOTAL DEVICE
T
STG
Storage Temperature All -55 to +150 °C
T
OPR
Operating Temperature All -55 to +100 °C
T
SOL
Lead Solder Temperature (Wave) All 260 for 10 sec °C
T
J
Junction Temperature Range All 125 °C
V
ISO
Isolation Test Voltage
(1)
(rms AC voltage, 60Hz, 1 min. duration)
All 5000 Vac(rms)
P
DTOTAL
Total Device Power Dissipation @ 25°C
Derate above 25°C
All 500 mW
6.6 mW/°C
EMITTER
I
F
Continuous Forward Current All 30 mA
V
R
Reverse Voltage All 6 V
P
DE
Total Power Dissipation 25°C Ambient
Derate above 25°C
All 50 mW
0.71 mW/°C
DETECTOR
V
DRM
Off-State Output Terminal Voltage FOD410, FOD4116 600 V
FOD4108, FOD4118 800
I
TSM
Peak Non-Repetitive Surge Current
(single cycle 60Hz sine wave)
All 3 A
I
TM
Peak On-State Current All 300 mA
P
DDET
Total Power Dissipation @ 25°C Ambient
Derate above 25°C
All 450 mW
5.9 mW/°C
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 3
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
Electrical Characteristics
(T
A
= 25°C Unless otherwise specified)
Individual Component Characteristics
Transfer Characteristics
*Typical values at T
A
= 25°C
Symbol Parameters Test Conditions Device Min. Typ.* Max Units
EMITTER
V
F
Input Forward Voltage I
F
= 20mA All 1.25 1.5 V
I
R
Reverse Leakage
Current
V
R
= 6V All 0.0001 10 µA
DETECTOR
I
D(RMS)
Peak Blocking Current,
Either Direction
I
F
= 0,
T
A
= 100°C
(2)
V
D
= 800V FOD4108,
FOD4118
3 100 µA
V
D
= 600V FOD410,
FOD4116
I
R(RMS)
Reverse Current T
A
= 100°C V
D
= 800V FOD4108,
FOD4118
3 100 µA
V
D
= 600V FOD410,
FOD4116
dv/dt Critical Rate of Rise of
Off-State Voltage
I
F
= 0
(4)
(Fig. 11) 10,000 V/µs
Symbol DC Characteristics Test Conditions Device Min. Typ.* Max. Units
I
FT
LED Trigger Current Main Terminal Voltage = 5V
(3)
FOD410,
FOD4108
0.65 2.0 mA
FOD4116,
FOD4118
0.65 1.3
V
TM
Peak On-State Voltage,
Either Direction
I
TM
= 300 mA peak, I
F
= rated I
FT
All 2.2 3 V
I
H
Holding Current,
Either Direction
V
T
= 3V All 200 500 µA
I
L
Latching Current V
T
= 2.2V All 5 mA
t
ON
Turn-On Time PF = 1.0,
I
T
= 300mA
V
RM
= V
DM
= 565 VAC FOD4108 60 µs
V
RM
= V
DM
= 424 VAC FOD410,
FOD4116,
FOD4118
t
OFF
Turn-Off Time V
RM
= V
DM
= 565 VAC FOD4108 52 µs
V
RM
= V
DM
= 424 VAC FOD410,
FOD4116,
FOD4118
dv/dt
crq
Critical Rate of Rise of
Voltage at Current
Commutation
V
D
= 0.67 V
DRM
,
di/dt
crq
≤
15 A/ms
T
j
= 25°C All 10,000 V/µs
T
j
= 80°C 5,000
di/dt
cr
Critical Rate of Rise of
On-State Current
All 8 A/µs
dV(IO)/dt Critical Rate of Rise of
Coupled Input/Output
Voltage
I
T
= 0A,
V
RM
= V
DM
= 424VAC
All
10,000
V/µs
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 4
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
Electrical Characteristics
(T
A
= 25°C Unless otherwise specified) (Continued)
Zero Crossing Characteristics
Isolation Characteristics
*Typical values at T
A
= 25°C
Notes:
2. Test voltage must be applied within dv/dt rating.
3. All devices are guaranteed to trigger at an I
F
value less than or equal to max I
FT
. Therefore, recommended operating
I
F
lies between max I
FT
(2mA for FOD410 and FOD4108 and 1.3mA for FOD4116 and FOD4118 and the absolute
max I
F
(60mA).
4. This is static dv/dt. See Figure 11 for test circuit. Commutating dv/dt is a function of the load-driving thyristor(s) only.
5. Isolation voltage, V
ISO
, is an internal device dielectric breakdown rating. For this test, Pins 1, 2 and 3 are common,
and Pins 4, 5 and 6 are common.
Typical Application
Typical circuit for use when hot line switching is required.
In this circuit the “hot” side of the line is switched and the
load connected to the cold or neutral side. The load may
be connected to either the neutral or hot line.
R
in
is calculated so that I
F
is equal to the rated I
FT
of the
part, 2mA for FOD410 and FOD4108, 1.3mA for
FOD4116 and FOD4118. The 39
Ω
resistor and 0.01µF
capacitor are for snubbing of the triac and may or may
not be necessary depending upon the particular triac
and load use.
Figure 1. Hot-Line Switching Application Circuit
Symbol DC Characteristics Test Conditions Min. Typ.* Max. Units
V
INH
Inhibit Voltage (MT1-MT2 voltage
above which device will not trigger)
I
F
= Rated I
FT
825V
I
DRM2
Leakage in Inhibited State I
F
= Rated I
FT
,
Rated V
DRM
, off state
20 200 µA
Symbol Characteristics Test Conditions Min. Typ.* Max. Units
V
ISO
Input-Output Isolation
Voltage
f = 60Hz, t = 1 min.
(5)
5000 Vac(rms)
0.01µF
VCC
Rin 1
2
3
6
5
4240 VAC
HOT
FKPF12N80
NEUTRAL
360 Ω
* For highly inductive loads (power factor < 0.5), change this value to 360 ohms.
330 Ω
FOD410
FOD4108
FOD4116
FOD4118 39*Ω
LOAD
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 5
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
Typical Performance Curves
-40-60 -20 0 20 40 60 80 100
0.6
0.8
1.0
1.2
1.4
1.6
VAK = 5.0V
Normalized to TA = 25°C
IF – FORWARD CURRENT (mA)
VF – FORWARD VOLTAGE (V)
0.1 1 10 100
0.6
0.8
1.0
1.2
1.4
1.6
1.8
Figure 2. Forward Voltage (VF) vs. Forward Current (IF)
Figure 4. Peak LED Current vs. Duty Factor, Tau
TA – AMBIENT TEMPERATURE (°C)
IFT – NORMALIZED LED TRIGGER CURRENT
Figure 3. Normalized LED Trigger Current (IFT)
vs. Ambient Temperature (TA)
-55°C
25°C
85°C
110100
1
10
100
10-6 10-5 10-4 10-3 10-2 10-1 100101
10000
1000
100
10
2000 400 600 800 1000
0.9
1.0
1.1
1.2
1.3
1.4
1.5
1.6
1.7
0123456
1
10
100
1000
t – LED PULSE DURATION (s)
If(pk) – PEAK LED CURRENT (mA)
Figure 6. Pulse Trigger Current
PW – PULSE WIDTH (µs)
IFTH(PW)/IFTH(DC) – NORMALIZED IFTH
Figure 7. On-State Voltage (VTM) vs. On-State Current (ITM)
VTM – ON-STATE VOLTAGE (V)
ITM – ON-STATE CURRENT (mA)
Figure 5. Trigger Delay Time
IFT/IF – NORMALIZED IF (mA)
tD – DELAY TIME (µs)
0.5
0.2
0.1
0.05
0.02
0.01
0.005
Duty Factor
t
DF =
τ
τ
t
tD = t(IF/IFT 25°C)
VD = 400VP-P
F = 60Hz
VL = 250VP-P
F = 60Hz
Normalized to DC
TA = 100°C TA = 25°C
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 6
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
Typical Performance Curves
(Continued)
-60 -40 -20 0 20 40 60 80 100
0.1
1
10
-40-60 -20 0 20 40 60 80 100
0.8
1.0
1.2
1.4
1.6
1.8
2.0
2.2
-60 -40 -20 0 20 40 60 80 100
50
100
150
200
250
300
350
Figure 8. Normalized Holding Current (I
H
)
vs. Ambient Temperature (T
A
)
T
A
– AMBIENT TEMPERATURE (°C)
I
H
– NORMALIZED HOLDING CURRENT
Figure 12. Current Reduction
T
A
– AMBIENT TEMPERATURE (°C)
I
TP
– PEAK ON-STATE CURRENT (mA)
Normalized to T
A
= 25°C
I
TP
= f(T
A
)
Figure 9. Normalized Off-State Current (IDRM)
vs. Ambient Temperature (T
A
)
T
A
– AMBIENT TEMPERATURE (°C)
I
DRM
– NORMALIZED OFF-STATE CURRENT
Figure 10. Normalized Inhibit Voltage (V
INH
)
vs. Ambient Temperature (T
A
)
-40-60 -20 0 20 40 60 80 100
2.5
2.0
1.5
1.0
0.5
0.0
Figure 11. Normalized Leakage in Inhibit State (I
DRM2
)
vs. Ambient Temperature (T
A
)
T
A
– AMBIENT TEMPERATURE (°C)
I
DRM2
(NORM) = I
DRM2
(T
A
) / I
DRM2
(25°C)
I
F
= Rated I
FT
V
DRM
= 600V
Normalized to T
A
= 25°C
V
D
= 800V, I
BD
(µA)
Normalized to T
A
= 25°C
-40-60 -20 0 20 40 60 80 100
1.2
1.1
1.0
0.9
0.8
T
A
– AMBIENT TEMPERATURE (°C)
V
INH
(NORM) = V
INH
(T
A
) / V
INH
(25°C)
I
F
= Rated I
FT
Normalized to T
A
= 25°C
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 7
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
VCC
5V
300
TRIAC
IGT R2C
15 mA 2400 0.1
30 mA 1200 0.2
50 mA 800 0.3
NOTE: Circuit supplies 25mA drive to gate of triac
at Vin = 25V and TA < 70°C
7400
ZL
115
Vac
180
R1R2
C1
16
4
2MOC3011
27
2W
2W
100
2W
dV
dt
VERNIER
MOUNT DUT ON
TEMPERATURE CONTROLLED
Cu PLATE
DIFFERENTIAL
PREAMP
f = 10 Hz
PW = 100 ∝s
50 PULSE
GENERATOR
ALL COMPONENTS ARE NON-INDUCTIVE UNLESS SHOWN
82
2W
470pF
0.001
0.005
0.01
0.047
0.47
0.1
56
2W
1N914
20V
1000
1/4W 1N967A
18V
RFP4N100
DUT 20k
X100 PROBE
X100 PROBE
VDRM/VRRM SELECT
6
4
1
2
1000
10 WATT
WIREWOUND
0.33 1000V
POWER
1 MEG 2W EACH
1.2 MEG
2W
TEST
0-1000V
10mA
0.047
1000V
Figure 11. Circuit for Static dV Measurement of Power Thyristors
dt
FOD410
FOD4108
FOD4116
FOD4118
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 8
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
Figure 12. Inverse-Parallel SCR Driver Circuit
V
CC
R
in
1
2
3
6
5
4
240 VAC
SCR
360Ω
R1 D1
SCR
R2 D2
LOAD
FOD420
FOD4208
FOD4216
FOD4218
FOD410
FOD4108
FOD4116
FOD4118
Suggested method of firing two, back-to-back SCR’s with a Fairchild triac driver. Diodes can be 1N4001; resistors,
R1 and R2, are optional 330
Ω
.
Note: This optoisolator should not be used to drive a load directly. It is intended to be a discrete triac driver device
only.
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 9
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
Package Dimensions
Note:
All dimensions are in millimeters.
6.80~7.80
6.00~7.00
(0.485)
1.15~1.35
2.29~2.79
0.40~0.60
7.62 (Typ.)
0.26 (Typ.)
15° (Max.)
4.50 (Typ.)
2.30~3.30
1.00 (Typ.)
3.85 (Typ.)
0.26 (Typ.)
3.00~4.00
0.35 (Typ.)
3.00~4.00
Pin 1
Through Hole
0.4" Lead Spacing
Surface Mount
Recommended Pad Layout for Surface Mount
Leadforms
1.15~1.35
2.29~2.70
0.75~1.25
(Both Sides)
8.15 (Typ.)
9.86~10.46
0.40~0.60
6.80~7.80
6.00~7.00
(0.485)
Pin 1
(1.50)
(7.90) (10.50)
(1.04)
(1.30)
(2.54)
6.80~7.80
6.00~7.00
4.60 (Typ.)
1.10 (Typ.) 3.00~4.00
(0.485)
Pin 1
1.15~1.35
2.29~2.79 0.40~0.60 10.16 (Typ.)
15° (Max.)
0.26 (Typ.)
2.30~3.30
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 10
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
Ordering Information
Marking Information
Option
Order Entry Identifier
(example) Description
None FOD410 Standard Through Hole Device
S FOD410S Surface Mount Lead Bend
SD FOD410SD Surface Mount; Tape and reel
T FOD410T 0.4" Lead Spacing
V FOD410V IEC60747-5-2 certification
TV FOD410TV IEC60747-5-2 certification, 0.4" Lead Spacing
SV FOD410SV IEC60747-5-2 certification, Surface Mount
SDV FOD410SDV IEC60747-5-2 certification, Surface Mount, Tape & Reel
FOD410
V X YY D
1
2
6
43 5
Definitions
1Fairchild logo
2Device number
3VDE mark indicates IEC60747-5-2 certified (Note: Only appears on
parts ordered with VDE option – See order entry table)
4 One digit year code, e.g., ‘7’
5Two digit work week ranging from ‘01’ to ‘53’
6 Assembly package code
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 11
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers
Carrier Tape Specifications
Note:
All dimensions are in inches (millimeters).
Reflow Profile
4.0 ±
Ø1.55 ±0.05
User Direction of Feed
2.0
± 0.1
1.75
10.4 ±0.1
± 0.10
7.5
7.7 ±0.1
± 0.1
16.3
15.7
12.0 ± 0.1
0.30 ± 0.05
0.1 MAX
0.1
4.2 ± 0.2
• Peak reflow temperature: 260 C (package surface temperature)
• Time of temperature higher than 183 C for 160 seconds or less
• One time soldering reflow is recommended
245 C, 10–30 s
Time (Minute)
0
300
250
200
150
100
50
0
0.5 1 1.5 2 2.5 3 3.5 4 4.5
Temperature (°C)
Time above 183 C, <160 sec
Ramp up = 2–10 C/sec
260 C peak
©2004 Fairchild Semiconductor Corporation www.fairchildsemi.com
FOD410, FOD4108, FOD4116, FOD4118 Rev. 1.5.0 12
TRADEMARKS
The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries,andis not
intended to be an exhaustive list of all such trademarks.
Auto-SPM™
Build it Now™
CorePLUS™
CorePOWER™
CROSSVOLT™
CTL™
Current Transfer Logic™
EcoSPARK®
EfficentMax™
EZSWITCH™*
™*
®
Fairchild®
Fairchild Semiconductor®
FACT Quiet Series™
FACT®
FAST®
FastvCore™
FETBench™
FlashWriter®*
FPS™
F-PFS™
FRFET®
Global Power ResourceSM
Green FPS™
Green FPS™e-Series™
Gmax™
GTO™
IntelliMAX™
ISOPLANAR™
MegaBuck™
MICROCOUPLER™
MicroFET™
MicroPak™
MillerDrive™
MotionMax™
Motion-SPM™
OPTOLOGIC®
OPTOPLANAR®
®
PDP SPM™
Power-SPM™
PowerTrench®
PowerXS™
Programmable Active Droop™
QFET®
QS™
Quiet Series™
RapidConfigure™
™
Saving our world, 1mW/W/kW at a time™
SmartMax™
SMART START™
SPM®
STEALTH™
SuperFET™
SuperSOT™-3
SuperSOT™-6
SuperSOT™-8
SupreMOS™
SyncFET™
Sync-Lock™
®*
ThePower Franchise®
TinyBoost™
TinyBuck™
TinyLogic®
TINYOPTO™
TinyPower™
TinyPWM™
TinyWire™
TriFault Detect™
TRUECURRENT™*
µSerDes™
UHC®
Ultra FRFET™
UniFET™
VCX™
VisualMax™
XS™
*Trademarks of System General Corporation, used under license by Fairchild Semiconductor.
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE
RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR
CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE
SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN,
WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE
EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION.
As used herein:
1. Life support devices or systems are devices or systems which, (a) are
intended for surgical implant into the body or (b) support or sustain life,
and (c) whose failure to perform when properly used in accordance
with instructions for use provided in the labeling, can be reasonably
expected to result in a significant injury of the user.
2. A critical component in any component of a life support, device, or
system whose failure to perform can be reasonably expected to
cause the failure of the life support device or system, or to affect its
safety or effectiveness.
ANTI-COUNTERFEITING POLICY
Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com,
under Sales Support.
Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts.
Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failedapplications,
and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of
counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are
listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have
full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technicalandproduct information.
Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide
any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our
customers to do their part in stopping this practice by buying direct or from authorized distributors.
PRODUCT STATUS DEFINITIONS
Definition of Terms
Datasheet Identification Product Status Definition
Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in
any manner without notice.
Preliminary Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild
Semiconductor reserves the right to make changes at any time without notice to improve design.
No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes
at any time without notice to improve the design.
Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor.
The datasheet is for reference information only.
Rev. I40
First Production
FOD410, FOD4108, FOD4116, FOD4118 — 6-Pin DIP Zero-Cross Triac Drivers