20
The TAZ part has fully molded, compliant
leadframe construction designed for use in
applications utilizing solder (Reflow, Wave
or Vapor Phase), conductive adhesive or
thermal compression bonding techniques.
Each chip is marked with polarity, capaci-
tance code and rated voltage.
The series comprises eight case sizes
(see dimensional chart below) with the
new V case enabling capacitance values
to 470 µF. The C case, with its non-stan-
dard aspect ratio, is retained as a QPL
(Qualified Product List) only special.
S
LA
H
W1
W
MARKING
(White marking on black body)
Case sizes A through E shar e a common (0.050" nom) height profile, compatible with PCMCIA type II applications. These
allow downsizing in all portable applications, ranging from sub-miniature hard-disc drive (HDD)/computer to portable
communications/GPS systems. The F case at 0.070" nom offers the versatility of a low profile design, while allowing
capacitance ratings to 100 µF for low voltage filtering applications.
Cases G, H and V also offer lower profile and greater volumetric efficiency than their nearest EIA sized counterparts
(ref. CWR11). These are especially suited to power supply applications. The V case is a new addition to the series
designed to maximize capacitance/voltage ratings while achieving minimum ESR levels and maximum power dissipation.
The regular configuration allows for banking (brickwalling) applications where maximum capacitance with minimal ESR
and inductance are required in a limited board space.
Polarity Stripe (+)
Capacitance Code
Rated Voltage
TAZ Series
Including CWR09 and COTS-Plus
CASE DIMENSIONS: millimeters (inches)
Case Length L Width W Height H Term. Width W1Term. Length A S min
Code ±0.38 (0.015) ±0.38 (0.015) ±0.38 (0.015) ±.13 (.005)
A2.54 (0.100) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 0.76 (0.030) 0.38 (0.015)
(0.05±0.005)
B3.81 (0.150) 1.27 (0.050) 1.27 (0.050) 1.27±0.13 0.76 (0.030) 1.65 (0.065)
(0.05±0.005)
D3.81 (0.150) 2.54 (0.100) 1.27 (0.050) 2.41+0.13/-0.25 0.76 (0.030) 1.65 (0.065)
(0.095+0.005/-0.01)
E5.08 (0.200) 2.54 (0.100) 1.27 (0.050) 2.41+0.13/-0.25 0.76 (0.030) 2.92 (0.115)
(0.095+0.005/-0.01)
F5.59 (0.220) 2.54 (0.100) 1.78 (0.070) 3.30±0.13 0.76 (0.030) 3.43 (0.135)
(0.13±0.005)
G6.73 (0.265) 2.79 (0.110) 2.79 (0.110) 2.67±0.13 1.27 (0.050) 3.56 (0.140)
(0.105±0.005)
H7.24 (0.285) 3.81 (0.150) 2.79 (0.110) 3.68+0.13/-0.51 1.27 (0.050) 4.06 (0.160)
(0.145+0.005/-0.02)
V6.93 (0.273) 5.97 (0.235) 3.45 (0.136) 3.05±0.13 1.4 (0.055) 3.38 (0.133)
(0.120±0.005)
21
TAZ Series
Including CWR09 and COTS-Plus
CWR09 J B 225 K B A \TR
Technical Data: Unless otherwise specified, all technical data relate to an ambient temperature of 25°C
Capacitance Range: 0.1 to 470 µF
Capacitance Tolerance: ±20%, ±10%, ±5%
Rated DC Voltage: (VR)ⱕ85°C: 4 6 10 15 20 25 35 50
Category Voltage: (VC) 125°C: 2.7 4 7 10 13 17 23 33
Surge Voltage: (VC)ⱕ85°C: 5.2 8 13 20 26 33 46 65
125°C: 3.5 5 9 12 16 21 28 40
Operating Temperature Range: -55°C to +125°C
Fully qualified to MIL-PRF-55365/4, this series represents
the most flexible of surface mount form factors, offering eight
case sizes (A through H). This series is fully interchangeable
with CWR06 conformal types, while offering the advantages
of molded body/compliant termination construction, polarity,
capacitance and JAN brand packaging. The molded con-
struction is compatible with a wide range of SMT board
assembly processes including wave or reflow solder, con-
ductive epoxy or compression bonding techniques. The five
smaller cases are characterized by their low pr ofile construc-
tion, with the A case being the world’s smallest molded mil-
itary tantalum. There are three termination finishes available:
fused solder plated (“K” per MIL-PRF-55365), hot solder
dipped (“C”) and gold plated (“B”). In addition, the molding
compound has been selected to meet the requirements of
UL94V-0 and outgassing requirements of NASA SP-R-
0022A.
CWR09 - MIL-PRF-55365/4
PART NUMBERING SYSTEM
TAZ COTS-PLUS SERIES
Style Voltage
Code Termination
Finish Capacitance
Code PackagingSurge Test
Option
Reliability
Grade
Capacitance
Tolerance
TAZ H 227 M 006 C R SB 08 00
PART NUMBERING SYSTEM
Style Case
Size Capacitance
Code Capacitance
Tolerance Voltage
Code Surge Test
Option
Termination
Finish
Qualification/
Reliability
PackagingStandard
or Low
ESR Range
This series features:
•
CWR09 form factor in Standard and Extended ratings.
• Low Profile molded design (Cases A through E).
• Low ESR Ratings (Cases G through V).
• Extended Case size (V) for ratings to 470 µF.
• Weibull Reliability Grading and Surge Test options.
All ratings in this series offer the advantages of molded
body/compliant termination construction, polarity, capaci-
tance and voltage marking. The molded construction is
compatible with a wide range of SMT board assembly
processes including wave or r eflow solder, conductive epoxy
or compression bonding techniques.
22
Surface Mount Military
CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZA225*004C䊐#@0^++ CWR09C^225*@+䊐4 2.2 1.0 10 12 6 8 8 8.0 A
TAZA475*004C䊐#@0^++ 4 4.7 1.0 10 12 6 8 8 12.0 A
TAZB475*004C䊐#@0^++ CWR09C^475*@+䊐4 4.7 1.0 10 12 6 8 8 8.0 B
TAZB106*004C䊐#@0^++ 4 10.0 1.0 10 12 8 10 10 8.0 B
TAZD106*004C䊐#@0^++ CWR09C^106*@+䊐4 10.0 1.0 10 12 8 8 10 4.0 D
TAZE156*004C䊐#@0^++ CWR09C^156*@+䊐4 15.0 1.0 10 12 8 10 12 3.5 E
TAZD226*004C䊐#@0^++ 4 22.0 1.0 10 12 8 10 12 4.0 D
TAZE336*004C䊐#@0^++ 4 33.0 2.0 20 24 8 10 12 3.0 E
TAZF336*004C䊐#@0^++ CWR09C^336*@+䊐4 33.0 2.0 20 24 8 10 12 2.2 F
TAZG686*004C䊐#@0^++ CWR09C^686*@+䊐4 68.0 3.0 30 36 10 12 12 1.1 G
TAZF107*004C䊐#@0^++ 4 100.0 4.0 40 48 10 12 12 2.0 F
TAZH107*004C䊐#@0^++ CWR09C^156*@+䊐4 100.0 4.0 40 48 10 12 12 0.9 H
TAZG157*004C䊐#@0^++ 4 150.0 6.0 60 72 10 12 12 1.0 G
TAZA155*006C䊐#@0^++ CWR09D^155*@+䊐6 1.5 1.0 10 12 6 8 8 8.0 A
TAZA335*006C䊐#@0^++ 6 3.3 1.0 10 12 6 8 8 12.0 A
TAZB335*006C䊐#@0^++ CWR09D^335*@+䊐6 3.3 1.0 10 12 6 8 8 8.0 B
TAZB685*006C䊐#@0^++ 6 6.8 1.0 10 12 6 8 8 8.0 B
TAZD685*006C䊐#@0^++ CWR09D^685*@+䊐6 6.8 1.0 10 12 6 8 8 4.5 D
TAZE106*006C䊐#@0^++ CWR09D^106*@+䊐6 10.0 1.0 10 12 8 10 12 3.5 E
TAZD156*006C䊐#@0^++ 6 15.0 1.0 10 12 8 10 12 5.0 D
TAZE226*006C䊐#@0^++ 6 22.0 2.0 20 24 8 10 12 3.5 E
TAZF226*006C䊐#@0^++ CWR09D^226*@+䊐6 22.0 2.0 20 24 8 10 12 2.2 F
TAZG476*006C䊐#@0^++ CWR09D^476*@+䊐6 47.0 3.0 30 36 10 12 12 1.1 G
TAZF686*006C䊐#@0^++ 6 68.0 4.0 40 48 10 12 12 1.5 F
TAZH686*006C䊐#@0^++ CWR09D^686*@+䊐6 68.0 4.0 40 48 10 12 12 0.9 H
TAZG107*006C䊐#@0^++ 6 100.0 6.0 60 72 10 12 12 1.1 G
TAZG107*006L䊐#@0^++ 6 100.0 6.0 60 72 10 12 12 0.150 G
TAZH227*006C䊐#@0^++ 6 220.0 10.0 100 120 10 12 12 0.9 H
TAZH227*006L䊐#@0^++ 6 220.0 10.0 100 120 10 12 12 0.100 H
TAZV477*006L䊐#@0^++ 6 470.0 28.0 280 336 12 14 14 0.055 V
Part Number Designations
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
䊐= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Optional Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, S = 13" T&R
For CWR p/n: Conformance per -55°C & +85°C For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, \TR13 = 13" T&R
-55°C & +85°C \W = Waffle
Following the voltage code, C designates Standard, L designates Low ESR Ratings
(1) V case size is only available as solder fused
23
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZA105*010C䊐#@0^++ CWR09F^105*@+䊐10 1.0 1.0 10 12 6 8 8 10.0 A
TAZA225*010C䊐#@0^++ 10 2.2 1.0 10 12 6 8 8 12.0 A
TAZB225*010C䊐#@0^++ CWR09F^225*@+䊐10 2.2 1.0 10 12 6 8 8 8.0 B
TAZB475*010C䊐#@0^++ 10 4.7 1.0 10 12 6 8 8 8.0 B
TAZD475*010C䊐#@0^++ CWR09F^475*@+䊐10 4.7 1.0 10 12 6 8 8 4.5 D
TAZD685*010C䊐#@0^++ 10 6.8 1.0 10 12 6 8 8 5.0 D
TAZE685*010C䊐#@0^++ CWR09F^685*@+䊐10 6.8 1.0 10 12 6 8 8 3.5 E
TAZD106*010C䊐#@0^++ 10 10.0 1.0 10 12 6 8 8 4.0 D
TAZE156*010C䊐#@0^++ 10 15.0 2.0 20 24 8 10 10 3.0 E
TAZF156*010C䊐#@0^++ CWR09F^156*@+䊐10 15.0 2.0 20 24 8 8 10 2.5 F
TAZE226*010C䊐#@0^++ 10 22.0 3.0 30 36 8 10 10 2.0 E
TAZG336*010C䊐#@0^++ CWR09F^336*@+䊐10 33.0 3.0 30 36 10 12 12 1.1 G
TAZF476*010C䊐#@0^++ 10 47.0 4.0 40 48 10 12 12 1.5 F
TAZH476*010C䊐#@0^++ CWR09F^476*@+䊐10 47.0 5.0 50 60 10 12 12 0.9 H
TAZG686*010C䊐#@0^++ 10 68.0 6.0 60 72 10 12 12 1.1 G
TAZG686*010L䊐#@0^++ 10 68.0 6.0 60 72 10 12 12 0.200 G
TAZH107*010C䊐#@0^++ 10 100.0 10.0 100 120 10 12 12 0.9 H
TAZH107*010L䊐#@0^++ 10 100.0 10.0 100 120 10 12 12 0.100 H
TAZH157*010C䊐#@0^++ 10 150.0 15.0 150 180 10 12 12 0.9 H
TAZH157*010L䊐#@0^++ 10 150.0 15.0 150 180 10 12 12 0.100 H
TAZV337*010L䊐#@0^++ 10 330.0 33.0 330 396 12 14 14 0.060 V
TAZA684*015C䊐#@0^++ CWR09H^684*@+䊐15 0.68 1.0 10 12 6 8 8 12.0 A
TAZA105*015C䊐#@0^++ 15 1.0 1.0 10 12 6 8 8 15.0 A
TAZB155*015C䊐#@0^++ CWR09H^155*@+䊐15 1.5 1.0 10 12 6 8 8 8.0 B
TAZB335*015C䊐#@0^++ 15 3.3 1.0 10 12 6 8 8 9.0 B
TAZD335*015C䊐#@0^++ CWR09H^335*@+䊐15 3.3 1.0 10 12 6 8 8 5.0 D
TAZD475*015C䊐#@0^++ 15 4.7 1.0 10 12 6 8 8 6.0 D
TAZE475*015C䊐#@0^++ CWR09H^475*@+䊐15 4.7 1.0 10 12 6 8 8 4.0 E
TAZE106*015C䊐#@0^++ 15 10.0 2.0 20 24 6 8 8 4.0 E
TAZF106*015C䊐#@0^++ CWR09H^106*@+䊐15 10.0 2.0 20 24 6 8 8 2.5 F
TAZF226*015C䊐#@0^++ 15 22.0 3.0 30 36 8 10 10 3.0 F
TAZG226*015C䊐#@0^++ CWR09H^226*@+䊐15 22.0 4.0 40 48 6 8 8 1.1 G
TAZH336*015C䊐#@0^++ CWR09H^336*@+䊐15 33.0 5.0 50 60 8 8 10 0.9 H
TAZH686*015C䊐#@0^++ 15 68.0 10.0 100 120 8 10 12 0.9 H
TAZH686*015L䊐#@0^++ 15 68.0 10.0 100 120 8 10 12 0.150 H
TAZH107*015C䊐#@0^++ 15 100.0 15.0 150 180 10 12 12 0.9 H
TAZH107*015L䊐#@0^++ 15 100.0 15.0 150 180 10 12 12 0.125 H
TAZV157*015L䊐#@0^++ 15 150.0 23.0 230 276 8 10 12 0.075 V
TAZV227*015L䊐#@0^++ 15 220.0 33.0 330 396 10 12 14 0.075 V
Part Number Designations
Surface Mount Military
CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
䊐= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Optional Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, S = 13" T&R
For CWR p/n: Conformance per -55°C & +85°C For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, \TR13 = 13" T&R
-55°C & +85°C \W = Waffle
Following the voltage code, C designates Standard, L designates Low ESR Ratings
(1) V case size is only available as solder fused
24
Surface Mount Military
CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZA474*020C䊐#@0^++ CWR09J^474*@+䊐20 0.47 1.0 10 12 6 8 8 14.0 A
TAZA684*020C䊐#@0^++ 20 0.68 1.0 10 12 6 8 8 15.0 A
TAZB684*020C䊐#@0^++ CWR09J^684*@+䊐20 0.68 1.0 10 12 6 8 8 10.0 B
TAZB105*020C䊐#@0^++ CWR09J^105*@+䊐20 1.0 1.0 10 12 6 8 8 12.0 B
TAZB225*020C䊐#@0^++ 20 2.2 1.0 10 12 6 8 8 9.0 B
TAZD225*020C䊐#@0^++ CWR09J^225*@+䊐20 2.2 1.0 10 12 6 8 8 5.0 D
TAZD335*020C䊐#@0^++ 20 3.3 1.0 10 12 6 8 8 6.0 D
TAZE335*020C䊐#@0^++ CWR09J^335*@+䊐20 3.3 1.0 10 12 6 8 8 4.0 E
TAZE475*020C䊐#@0^++ 20 4.7 1.0 10 12 6 8 8 6.0 E
TAZE685*020C䊐#@0^++ 20 6.8 2.0 20 24 6 8 8 5.0 E
TAZF685*020C䊐#@0^++ CWR09J^685*@+䊐20 6.8 2.0 20 24 6 8 8 2.4 F
TAZF156*020C䊐#@0^++ 20 15.0 3.0 30 36 6 8 8 3.0 F
TAZG156*020C䊐#@0^++ CWR09J^156*@+䊐20 15.0 3.0 30 36 6 8 8 1.1 G
TAZG226*020C䊐#@0^++ 20 22.0 4.0 40 48 6 8 8 2.5 G
TAZG226*020L䊐#@0^++ 20 22.0 4.0 40 48 6 8 8 0.500 G
TAZH226*020C䊐#@0^++ CWR09J^226*@+䊐20 22.0 4.0 40 48 6 8 8 0.9 H
TAZH476*020C䊐#@0^++ 20 47.0 10.0 100 120 8 10 10 0.9 H
TAZH476*020L䊐#@0^++ 20 47.0 10.0 100 120 8 10 10 0.250 H
TAZV107*020L䊐#@0^++ 20 100.0 20.0 200 240 10 12 14 0.095 V
TAZA334*025C䊐#@0^++ CWR09K^334*@+䊐25 0.33 1.0 10 12 6 8 8 15.0 A
TAZB684*025C䊐#@0^++ CWR09K^684*@+䊐25 0.68 1.0 10 12 6 8 8 7.5 B
TAZB105*025C䊐#@0^++ 25 1.0 1.0 10 12 6 8 8 10.0 B
TAZD155*025C䊐#@0^++ CWR09K^155*@+䊐25 1.5 1.0 10 12 6 8 8 6.5 D
TAZD225*025C䊐#@0^++ 25 2.2 1.0 10 12 6 8 8 6.0 D
TAZE225*025C䊐#@0^++ CWR09K^225*@+䊐25 2.2 1.0 10 12 6 8 8 3.5 E
TAZE335*025C䊐#@0^++ 25 3.3 1.0 10 12 6 8 8 4.0 E
TAZF475*025C䊐#@0^++ CWR09K^475*@+䊐25 4.7 2.0 20 24 6 8 8 2.5 F
TAZF685*025C䊐#@0^++ 25 6.8 2.0 20 24 6 8 8 3.0 F
TAZG685*025C䊐#@0^++ CWR09K^685*@+䊐25 6.8 2.0 20 24 6 8 8 1.2 G
TAZG106*025C䊐#@0^++ CWR09K^106*@+䊐25 10.0 3.0 30 36 6 8 8 1.4 G
TAZH156*025C䊐#@0^++ CWR09K^156*@+䊐25 15.0 4.0 40 48 6 8 8 1.0 H
TAZH226*025C䊐#@0^++ 25 22.0 6.0 60 72 6 8 8 0.9 H
TAZH226*025L䊐#@0^++ 25 22.0 6.0 60 72 6 8 8 0.200 H
TAZV686*025L䊐#@0^++ 25 68.0 17.0 170 204 10 12 14 0.095 V
Part Number Designations
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
䊐= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Optional Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, S = 13" T&R
For CWR p/n: Conformance per -55°C & +85°C For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, \TR13 = 13" T&R
-55°C & +85°C \W = Waffle
Following the voltage code, C designates Standard, L designates Low ESR Ratings
(1) V case size is only available as solder fused.
25
Surface Mount Military
CWR09 - MIL-PRF-55365/4 and TAZ COTS-Plus
DC Leakage (max) Dissipation Factor (max)
QPL Part Number DC rated Cap ESR (max) Case
AVX Part Number (for reference only) voltage (nom) +25°C +85°C +125°C +25°C +85/125°C -55°C 100 kHz Size
(85°C) µF (µA) (µA) (µA) (%) (%) (%) +25°C
(volts) (Ohms)
TAZA224*035C䊐#@0^++ CWR09M^224*@+䊐35 0.22 1.0 10 12 6 8 8 18.0 A
TAZB474*035C䊐#@0^++ CWR09M^474*@+䊐35 0.47 1.0 10 12 6 8 8 10.0 B
TAZD105*035C䊐#@0^++ CWR09M^105*@+䊐35 1.0 1.0 10 12 6 8 8 6.5 D
TAZE155*035C䊐#@0^++ CWR09M^155*@+䊐35 1.5 1.0 10 12 6 8 8 4.5 E
TAZF335*035C䊐#@0^++ CWR09M^335*@+䊐35 3.3 1.0 10 12 6 8 8 2.5 F
TAZG475*035C䊐#@0^++ CWR09M^475*@+䊐35 4.7 2.0 20 24 6 8 8 1.5 G
TAZH685*035C䊐#@0^++ CWR09M^685*@+䊐35 6.8 3.0 30 36 6 8 8 1.3 H
TAZH106*035C䊐#@0^++ 35 10.0 4.0 40 48 8 10 10 0.9 H
TAZH106*035L䊐#@0^++ 35 10.0 4.0 40 48 8 10 10 0.300 H
TAZA104*050C䊐#@0^++ CWR09N^104*@+䊐50 0.10 1.0 10 12 6 8 8 22.0 A
TAZA154*050C䊐#@0^++ CWR09N^154*@+䊐50 0.15 1.0 10 12 6 8 8 17.0 A
TAZB224*050C䊐#@0^++ CWR09N^224*@+䊐50 0.22 1.0 10 12 6 8 8 14.0 B
TAZB334*050C䊐#@0^++ CWR09N^334*@+䊐50 0.33 1.0 10 12 6 8 8 12.0 B
TAZD684*050C䊐#@0^++ CWR09N^684*@+䊐50 0.68 1.0 10 12 6 8 8 7.0 D
TAZE105*050C䊐#@0^++ CWR09N^105*@+䊐50 1.0 1.0 10 12 6 8 8 6.0 E
TAZF155*050C䊐#@0^++ CWR09N^155*@+䊐50 1.5 1.0 10 12 6 8 8 4.0 F
TAZF225*050C䊐#@0^++ CWR09N^225*@+䊐50 2.2 2.0 20 24 6 8 8 2.5 F
TAZG335*050C䊐#@0^++ CWR09N^335*@+䊐50 3.3 2.0 20 24 6 8 8 2.0 G
TAZH475*050C䊐#@0^++ CWR09N^475*@+䊐50 4.7 3.0 30 36 6 8 8 1.5 H
Part Number Designations
^ = Termination Finish:1# = Inspection Level: * = Tolerance: @ = Failure Rate Level: + = Surge Option:
䊐= Packaging:
For TAZ p/n: S = Std. Conformance M = ±20% Weibull: B = 0.1%/1000 Hrs. For TAZ p/n: For TAZ p/n:
9 = Gold Plated L = Optional Group A K = ±10% (90% C = 0.01%/1000 Hrs. 00 = None B = Bulk
8 = Hot Solder Dipped For CWR p/n: J = ±5% (Special conf.) 23 = 10 cycles, +25°C R = 7" T&R
0 = Solder Fused M = Military order only) Comm: Z = Non ER 24 = 10 cycles, S = 13" T&R
For CWR p/n: Conformance per -55°C & +85°C For CWR p/n:
B = Gold Plated MIL-PRF-55365 For CWR p/n: Bulk = Standard
C = Hot Solder Dipped A = 10 cycles, +25°C \TR = 7" T&R
K = Solder Fused B = 10 cycles, \TR13 = 13" T&R
-55°C & +85°C \W = Waffle
Following the voltage code, C designates Standard, L designates Low ESR Ratings
(1) V case size is only available as solder fused.
26
CWR09 Series
MIL-C-55365/4
MIL-C-55365/4 Case Rated Capacitance DC Leakage (max.) Dissipation Factor (max.) Max. ESR
Part Size夹Voltage (nom.) 100 kHz
Number (85°C) (µF) +25°C +85°C +125°C +25°C +85/125°C -55°C +25°C
(See Note) (volts) (µA) (µA) (µA) (%) (%) (%) Style
CWR09
(Ohms)
CWR09C*225†@䉭䊐 A 4 2.2 1.0 10 12 6 8 8 8.0
CWR09C*475†@䉭䊐 B 4 4.7 1.0 10 12 6 8 8 8.0
CWR09C*685†@䉭䊐 C 4 6.8 1.0 10 12 6 8 8 5.5
CWR09C*106†@䉭䊐 D 4 10.0 1.0 10 12 8 8 10 4.0
CWR09C*156†@䉭䊐 E 4 15.0 1.0 10 12 8 10 12 3.5
CWR09C*336†@䉭䊐 F 4 33.0 2.0 20 24 8 10 12 2.2
CWR09C*686†@䉭䊐 G 4 68.0 3.0 30 36 10 12 12 1.1
CWR09C*107†@䉭䊐 H 4 100.0 4.0 40 48 10 12 12 0.9
CWR09D*155†@䉭䊐 A 6 1.5 1.0 10 12 6 8 8 8.0
CWR09D*335†@䉭䊐 B 6 3.3 1.0 10 12 6 8 8 8.0
CWR09D*475†@䉭䊐 C 6 4.7 1.0 10 12 6 8 8 5.5
CWR09D*685†@䉭䊐 D 6 6.8 1.0 10 12 6 8 8 4.5
CWR09D*106†@䉭䊐 E 6 10.0 1.0 10 12 8 10 12 3.5
CWR09D*226†@䉭䊐 F 6 22.0 2.0 20 24 8 10 12 2.2
CWR09D*476†@䉭䊐 G 6 47.0 3.0 30 36 10 12 12 1.1
CWR09D*686†@䉭䊐 H 6 68.0 4.0 40 48 10 12 12 0.9
CWR09F*105†@䉭䊐 A 10 1.0 1.0 10 12 6 8 8 10.0
CWR09F*225†@䉭䊐 B 10 2.2 1.0 10 12 6 8 8 8.0
CWR09F*335†@䉭䊐 C 10 3.3 1.0 10 12 6 8 8 5.5
CWR09F*475†@䉭䊐 D 10 4.7 1.0 10 12 6 8 8 4.5
CWR09F*685†@䉭䊐 E 10 6.8 1.0 10 12 6 8 8 3.5
CWR09F*156†@䉭䊐 F 10 15.0 2.0 20 24 8 8 10 2.5
CWR09F*336†@䉭䊐 G 10 33.0 3.0 30 36 10 12 12 1.1
CWR09F*476†@䉭䊐 H 10 47.0 5.0 50 60 10 12 12 0.9
CWR09H*684†@䉭䊐 A 15 0.68 1.0 10 12 6 8 8 12.0
CWR09H*155†@䉭䊐 B 15 1.5 1.0 10 12 6 8 8 8.0
CWR09H*225†@䉭䊐 C 15 2.2 1.0 10 12 6 8 8 5.5
CWR09H*335†@䉭䊐 D 15 3.3 1.0 10 12 6 8 8 5.0
CWR09H*475†@䉭䊐 E 15 4.7 1.0 10 12 6 8 8 4.0
CWR09H*106†@䉭䊐 F 15 10.0 2.0 20 24 6 8 8 2.5
CWR09H*226†@䉭䊐 G 15 22.0 4.0 40 48 8 8 10 1.1
CWR09H*336†@䉭䊐 H 15 33.0 5.0 50 60 8 8 10 0.9
CWR09J*474†@䉭䊐 A 20 0.47 1.0 10 12 6 8 8 14.0
CWR09J*684†@䉭䊐 B 20 0.68 1.0 10 12 6 8 8 10.0
CWR09J*105†@䉭䊐 B 20 1.0 1.0 10 12 6 8 8 12.0
CWR09J*155†@䉭䊐 C 20 1.5 1.0 10 12 6 8 8 6.0
CWR09J*225†@䉭䊐 D 20 2.2 1.0 10 12 6 8 8 5.0
CWR09J*335†@䉭䊐 E 20 3.3 1.0 10 12 6 8 8 4.0
CWR09J*685†@䉭䊐 F 20 6.8 2.0 20 24 6 8 8 2.4
CWR09J*156†@䉭䊐 G 20 15.0 3.0 30 36 6 8 8 1.1
CWR09J*226†@䉭䊐 H 20 22.0 4.0 40 48 6 8 8 0.9
ELECTRICAL RATINGS FOR CWR09 CAPACITORS
* = Termination Finish
B = Gold Plated
C = Hot Solder Dipped
K = Solder Fused
† = Tolerance Code
J = ±5%
K = ±10%
M = ±20%
@ = Failure Rate Level
Exponential:
M = 1.0% per 1000 hours
P = 0.1% per 1000 hours
R = 0.01% per 1000 hours
S = 0.001% per 1000 hours
Weibull:
B = 0.1% per 1000 hours
C = 0.01% per 1000 hours
䉭= Optional Surge Current
A = 10 cycles at 25°C
B = 10 cycles at -55°C
and +85°C
䊐= Packaging
Bulk Standard
\TR=7" Tape & Reel
\TR13=13" Tape & Reel
\W=Waffle Pack
夹The C case has limited availability. Where
possible D case should be substituted.
27
CWR09 Series
MIL-C-55365/4
* = Termination Finish
B = Gold Plated
C = Hot Solder Dipped
K = Solder Fused
† = Tolerance Code
J = ±5%
K = ±10%
M = ±20%
@ = Failure Rate Level
Exponential:
M = 1.0% per 1000 hours
P = 0.1% per 1000 hours
R = 0.01% per 1000 hours
S = 0.001% per 1000 hours
Weibull:
B = 0.1% per 1000 hours
C = 0.01% per 1000 hours
䉭= Optional Surge Current
A = 10 cycles at 25°C
B = 10 cycles at -55°C
and +85°C
䊐= Packaging
Bulk Standard
\TR=7" Tape & Reel
\TR13=13" Tape & Reel
\W=Waffle Pack
ELECTRICAL RATINGS FOR CWR09 CAPACITORS
MIL-C-55365/4 Case Rated Capacitance DC Leakage (max.) Dissipation Factor (max.) Max. ESR
Part Size夹Voltage (nom.) 100 kHz
Number (85°C) (µF) +25°C +85°C +125°C +25°C +85/125°C -55°C +25°C
(See Note) (volts) (µA) (µA) (µA) (%) (%) (%) Style
CWR09
(Ohms)
CWR09K*334†@䉭䊐 A 25 0.33 1.0 10 12 6 8 8 15.0
CWR09K*684†@䉭䊐 B 25 0.68 1.0 10 12 6 8 8 7.5
CWR09K*105†@䉭䊐 C 25 1.0 1.0 10 12 6 8 8 6.5
CWR09K*155†@䉭䊐 D 25 1.5 1.0 10 12 6 8 8 6.5
CWR09K*225†@䉭䊐 E 25 2.2 1.0 10 12 6 8 8 3.5
CWR09K*475†@䉭䊐 F 25 4.7 2.0 20 24 6 8 8 2.5
CWR09K*685†@䉭䊐 G 25 6.8 2.0 20 24 6 8 8 1.2
CWR09K*106†@䉭䊐 G 25 10.0 3.0 30 36 6 8 8 1.4
CWR09K*156†@䉭䊐 H 25 15.0 4.0 40 48 6 8 8 1.0
CWR09M*224†@䉭䊐 A 35 0.22 1.0 10 12 6 8 8 18.0
CWR09M*474†@䉭䊐 B 35 0.47 1.0 10 12 6 8 8 10.0
CWR09M*684†@䉭䊐 C 35 0.68 1.0 10 12 6 8 8 8.0
CWR09M*105†@䉭䊐 D 35 1.0 1.0 10 12 6 8 8 6.5
CWR09M*155†@䉭䊐 E 35 1.5 1.0 10 12 6 8 8 4.5
CWR09M*335†@䉭䊐 F 35 3.3 1.0 10 12 6 8 8 2.5
CWR09M*475†@䉭䊐 G 35 4.7 2.0 20 24 6 8 8 1.5
CWR09M*685†@䉭䊐 H 35 6.8 3.0 30 36 6 8 8 1.3
CWR09N*104†@䉭䊐 A 50 0.10 1.0 10 12 6 8 8 22.0
CWR09N*154†@䉭䊐 A 50 0.15 1.0 10 12 6 8 8 17.0
CWR09N*224†@䉭䊐 B 50 0.22 1.0 10 12 6 8 8 14.0
CWR09N*334†@䉭䊐 B 50 0.33 1.0 10 12 6 8 8 12.0
CWR09N*474†@䉭䊐 C 50 0.47 1.0 10 12 6 8 8 8.0
CWR09N*684†@䉭䊐 D 50 0.68 1.0 10 12 6 8 8 7.0
CWR09N*105†@䉭䊐 E 50 1.0 1.0 10 12 6 8 8 6.0
CWR09N*155†@䉭䊐 F 50 1.5 1.0 10 12 6 8 8 4.0
CWR09N*225†@䉭䊐 F 50 2.2 2.0 20 24 6 8 8 2.5
CWR09N*335†@䉭䊐 G 50 3.3 2.0 20 24 6 8 8 2.0
CWR09N*475†@䉭䊐 H 50 4.7 3.0 30 36 6 8 8 1.5
NOTE: To complete the MIL-C-55365/4 Part Number, additional information
must be added: Contact your local AVX sales office for latest qualification status.
夹The C case has limited availability. Where
possible D case should be substituted.
