DATA SHEET SILICON POWER TRANSISTOR 2SC2335 NPN SILICON TRIPLE DIFFUSED TRANSISTOR FOR HIGH-SPEED HIGH-VOLTAGE SWITCHING The 2SC2335 is a mold power transistor developed for high-speed ORDERING INFORMATION high-voltage switching, and is ideal for use as a driver in devices such Part No. Package as switching regulators, DC/DC converters, and high-frequency power 2SC2335 TO-220AB amplifiers. FEATURES (TO-220AB) * Low collector saturation voltage: VCE(sat) = 1.0 V MAX. @IC = 3.0 A * Fast switching speed: tf = 1.0 s MAX. @IC = 3.0 A * Wide base reverse-bias SOA: VCEX(SUS)1 = 450 V MIN. @IC = 3.0 A ABSOLUTE MAXIMUM RATINGS (TA = 25C) Ratings Unit Collector to base voltage Parameter VCBO 500 V Collector to emitter voltage VCEO 400 V Emitter to base voltage VEBO 7.0 V Collector current (DC) IC(DC) 7.0 A Collector current (pulse) IC(pulse) 15 A Base current (DC) Symbol Conditions PW 300 s, duty cycle 10% IB(DC) Total power dissipation PT Junction temperature Tj Storage temperature Tstg TC = 25C TA = 25C 3.5 A 40 W 1.5 W 150 -55 to +150 C C The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC representative for availability and additional information. Document No. D14861EJ2V0DS00 (2nd edition) Date Published April 2002 N CP(K) Printed in Japan (c) 2002 1998 2SC2335 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Symbol Collector to emitter voltage VCEO(SUS) Collector to emitter voltage VCEX(SUS)1 Collector to emitter voltage VCEX(SUS)2 Conditions MIN. IC = 3.0 A, IB1 = 0.6 A, L = 1 mH IC = 3.0 A, IB1 = -IB2 = 0.6 A, VBE(OFF) = -5.0 V, L = 180 H, clamped IC = 6.0 A, IB1 = 2.0 A, -IB2 = 0.6 A, VBE(OFF) = -5.0 V, L = 180 H, clamped MAX. Unit V 450 V 400 V 10 A 1.0 10 mA A 1.0 mA Collector cutoff current ICBO Collector cutoff current ICER VCB = 400 V, IE = 0 A VCE = 400 V, RBE = 51 , TA = 125C Collector cutoff current ICEX1 VCE = 400 V, VBE(OFF) = -1.5 V Collector cutoff current ICEX2 VCE = 400 V, VBE(OFF) = -1.5 V, TA = 125C Emitter cutoff current IEBO VEB = 5.0 V, IC = 0 A 10 A DC current gain hFE1 VCE = 5.0 V, IC = 0.1 ANote 20 80 DC current gain hFE2 VCE = 5.0 V, IC = 1.0 ANote 20 80 Note 10 DC current gain hFE3 VCE = 5.0 V, IC = 3.0 A Collector saturation voltage VCE(sat) IC = 3.0 A, IB = 0.6 ANote 1.0 V Base saturation voltage VBE(sat) IC = 3.0 A, IB = 0.6 ANote IC = 3.0 A, RL = 50 , IB1 = -IB2 = 0.6 A, VCC 150 V Refer to the test circuit. 1.2 1.0 V s 2.5 s 1.0 s Turn-on time ton Storage time tstg Fall time tf Note Pulse test PW 350 s, duty cycle 2% hFE CLASSIFICATION Marking M L K hFE2 20 to 40 30 to 60 40 to 80 SWITCHING TIME (ton, tstg, tf) TEST CIRCUIT Base current waveform Collector current waveform 2 TYP. 400 Data Sheet D14861EJ2V0DS 2SC2335 PPDOXPLQXPERDUG QRLQVXODWLQJERDUG JUHDVHFRDWLQJQDWXUDO DLUFRROLQJ :LWKLQILQLWHKHDWVLQN &ROOHFWRU&XUUHQW,&$ 7RWDO3RZHU'LVVLSDWLRQ37: TYPICAL CHARACTERISTICS (TA = 25C) 6LQJOHSXOVH 3XOVH:LGWK3:PV &ROOHFWRU&XUUHQW,&$ &ROOHFWRU&XUUHQW,&$ &DVH7HPSHUDWXUH7&& &ROOHFWRUWR(PLWWHU9ROWDJH9&(9 7UDQVLHQW7KHUPDO5HVLVWDQFHUWKMF &: 'HUDWLQJG7 $PELHQW7HPSHUDWXUH7$& &ROOHFWRUWR(PLWWHU9ROWDJH9&(9 &ROOHFWRUWR(PLWWHU9ROWDJH9&(9 Data Sheet D14861EJ2V0DS 3 7XUQ2Q7LPHWRQV 6WRUDJH7LPHWVWJV )DOO7LPHWIV 3XOVHWHVW 4 &ROOHFWRU6DWXUDWLRQ9ROWDJH9&(VDW 9 %DVH6DWXUDWLRQ9ROWDJH9%(VDW 9 '&&XUUHQW*DLQK)( 2SC2335 &ROOHFWRU&XUUHQW,&$ &ROOHFWRU&XUUHQW,&$ Data Sheet D14861EJ2V0DS 3XOVHWHVW &ROOHFWRU&XUUHQW,&$ 2SC2335 PACKAGE DRAWING (UNIT: mm) %DVH &ROOHFWRU (PLWWHU )LQFROOHFWRU Data Sheet D14861EJ2V0DS 5 2SC2335 * The information in this document is current as of July, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4