P7 PS P3 Pl TRICAL_ SPECIFICATIONS: 1.0 INDUCTANCE: (P1J1) : (P3J3) 2.0 DC RESISTANCE: P8-J8 = P7J7 P6J6 = P3-JS P5J5 = P4J4 P2-J2 = Pi-J1 3.0 COMMON MODE: FREQUENCY (MHz) 1 5 20 70 200 500 : ( P4-u4) : (P7-J7) 65 uH TYP @.05V, 10KHz -) OHM MAX -) OHM MAX 0 OHM MAX -) OHM MAX CMA -dB) TYPICAL MIN 8 5 17 15 23 15 25 20 22 17 11 6 THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT OF BEL STEWART CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 Maglad 717.234.7512 hitp://www.stewartconnector.com SHEET DRAWING NO. REV. 1 OF 3 SI-40262! 07 .635 [16.13] MAX. | 9.040 [91.02] +.003 [0.08] (4) | 2.006 RED RED Maglade M 5b Dk Part Number S PE GREEN YE CRFEN care e 100 [2.54] === & 409 [10.389] 8 509 [12.929] | DETAIL B TYPICAL LED HOLE LAYOUT (.708 [17.98]) _| ( 148 [3.75] ) HIGHEST POINT OF BEAM 7 N 7 ed = 8 8 a i 7) TT 8 | \ RED/GREEN " ol | rT | Tn | ik rc | RED /GREEN ! : 2.12 aGESt 4 rhe NOTES: 1. ~ CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V-0 CONTACT/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD, 50 MICRO-INCHES MIN. IN CONTACT AREA. . PIN NOT ELECTRICALLY CONNECTED MAYBE OMITTED. SEE ELECTRICAL DRAWING FOR OMITTED PINS. . TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] WAVE SOLDER COMPATIBLE PREHEAT 125C/90SECS. P.C.B, RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE ALL CENTERLINE DIMENSIONS ARE BASIC. BICOLOR LED POLARITY (ENLARGED VIEW) RED GREEN - .050 [1.27] _ 050 [1.27] (7) ao 9.035 [0.89] (8)(SIGNAL) 8 < 3 PIN 1: PI | 44 1 1 5 9.062 [1.57] (2)(SHIELD) Pp ~~ = 128 [325] posts) Yp [+450 [11.43] +] tf 125 [3.18] " ~ Ty QD XY i | 160 [4.06] ark, -85> 036 foot) + = -| |+.080 [2.03] L610 [15.49] - LED SPECIFICATION STANDARD LED WAVELENGTH Forward V (MAX) * (TP) GREEN 565 nm 2.5 V 22V RED 625 nm 2.5 V 2.0 V *WITH A FORWARD CURRENT OF 20 mA (TYP) Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 MagJadk 717.234.7512 hitp://www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT) SHEET DRAWING NO. S|-40262 O6 OF BEL STEWART CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. 2 OF 3POINT OF CONTACT WITH PANEL 080 [2.03] -=- 656 won| 554 [14.07] = S Toh Loo [0.00] (TOP OF PCB TO BOTTOM OF OPENING) a L 010 [0.25] MAX. RADIUS(4) 275 [6.98] MAX. SUGGESTED PANEL OPENING 1. THE SUGGESTED PANEL OPENING IS INTENDED TO GIVE THE USER THE ABILITY TO HAVE REASONABLE JACK / PANEL CLEARANCES YET MAINTAIN RELIABLE GROUNDING CAPABILITY. 2. ALL TOLERANCES NOT OTHERWISE SPECIFIED TO BE +.005 [0.13] Bel Stewart Connector 11118 Susquehanna Trail, South Glen Rock, Pa 17327-9199 717.234.7512 hitp://www.stewartconnector.com THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON ARE CONFIDENTIAL AND PROPERTY OF BEL STEWART ONNECTOR AND SHALL NOT BE REPRODUCED, COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN CONTENT) SHEET DRAWING NO. S|-40262 oO 5 OF BEL STEWART CONNECTOR. THE SUBJECT MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. 3 OF 5