Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type) Data Sheet Chip Inductor (Chip Coil) 1 Power Inductor (Wire Wound Type) LQH2MC_02 Series (0806 Size) Packaging 0.900.05 Dimensions 2.00.2 Code Packaging Minimum Quantity L 180mm Embossed Tape 3000 B Bulk(Bag) 100 1.60.2 0.60.2 0.80.2 0.60.2 (in mm) Rated Value (p: packaging code) Inductance Rated Current (Based on Inductance Change) Rated Current (Based on Temperature Rise) DC Resistance Self Resonance Frequency (min.) LQH2MCN1R0M02p 1.0H20% - 485mA 0.30ohm30% 100MHz LQH2MCN1R5M02p 1.5H20% - 445mA 0.40ohm30% 95MHz LQH2MCN2R2M02p 2.2H20% - 425mA 0.48ohm30% 70MHz LQH2MCN3R3M02p 3.3H20% - 375mA 0.60ohm30% 65MHz LQH2MCN4R7M02p 4.7H20% - 300mA 0.8ohm30% 60MHz LQH2MCN5R6M02p 5.6H20% - 280mA 0.9ohm30% 60MHz LQH2MCN6R8M02p 6.8H20% - 255mA 1.0ohm30% 55MHz LQH2MCN8R2M02p 8.2H20% - 235mA 1.1ohm30% 50MHz LQH2MCN100K02p 10H10% - 225mA 1.2ohm30% 48MHz LQH2MCN120K02p 12H10% - 210mA 1.4ohm30% 44MHz LQH2MCN150K02p 15H10% - 200mA 1.6ohm30% 40MHz LQH2MCN180K02p 18H10% - 190mA 1.8ohm30% 35MHz LQH2MCN220K02p 22H10% - 185mA 2.1ohm30% 30MHz LQH2MCN270K02p 27H10% - 180mA 2.5ohm30% 30MHz LQH2MCN330K02p 33H10% - 160mA 2.8ohm30% 28MHz LQH2MCN390K02p 39H10% - 125mA 4.4ohm30% 24MHz LQH2MCN470K02p 47H10% - 120mA 5.1ohm30% 18MHz LQH2MCN560K02p 56H10% - 110mA 5.7ohm30% 17MHz LQH2MCN680K02p 68H10% - 100mA 6.6ohm30% 14MHz LQH2MCN820K02p 82H10% - 90mA 7.5ohm30% 14MHz Part Number Test Frequency: 1MHz Class of Magnetic Shield: No magnetic shield Operating Temperature Range (Self-temperature rise is not included): -40C to +85C Only for reflow soldering. Continued on the following page. o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2010.9.9 http://www.murata.com/ Inductors (Coils) > Chip Inductor (Chip Coil) > Power Inductor (Wire Wound Type) Data Sheet 2 Continued from the preceding page. Notice (Rated Current) <Rated Current> (Based on Temperature Rise) When Rated Current is applied to the Products, self-generation of heat will rise to 40C or less. Inductance-Frequency Characteristics (Typ.) Inductance-Current Characteristics (Typ.) 1000 1000 82H 47H 100 100 82H 47H Inductance (H) Inductance (H) 22H 10H 4.7H 10 1.0H 22H 10H 10 4.7H 1.0H 1 1 0.1 0.1 1 10 Frequency (MHz) 100 0.1 10 1000 100 Current (mA) 1000 Temperature Rise Characteristics (Typ.) 50 47H 10H 4.7H 2.2H 1.0H Temperature Rise (C) 40 30 20 10 0 0 200 400 Current (mA) 600 800 !Caution/Notice !Caution (Rating) Do not use products beyond the rated current as this may create excessive heat. Notice Solderability of Tin plating termination chip might be deteriorated when low temperature soldering profile where peak solder temperature is below the Tin melting point is used. Please confirm the solderability of Tin plating termination chip before use. o This data sheet is applied for CHIP INDUCTORS (CHIP COILS) used for General Electronics equipment for your design. ! Note: 1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it's specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering. 2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering. 2010.9.9 http://www.murata.com/