F-210-1 FW-10-05-G-D-400-090-A FW-25-03-G-D-163-120 FW-20-05-G-D-500-075 (1,27mm) .050" FW SERIES SMT MICRO BOARD STACKER SPECIFICATIONS Low profile or skyscraper styles Mates with: CLP, FFSD, FLE For complete specifications and recommended PCB layouts see www.samtec.com?FW APPLICATIONS Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Plating: Sn or Au over 50" (1,27m) Ni Current Rating: 1.75A @ 80C ambient Operating Temp Range: -55C to +125C RoHS Compliant: Yes Variable board spacing FW MATED HEIGHT CLP LEAD STYLE FW FW-XX-03-X-X-233-065 Processing: MATED CLP HEIGHT* - 02 (9,91) .390 FW-XX-03-X-X-303-065 Lead-Free Solderable: Yes SMT Lead Coplanarity: (0,10mm) .004" max (02-30) (0,15mm) .006" max (31-50) (8,13) .320 (1,27mm x 1,27mm) .050" x .050" micro pitch *Processing conditions will affect mated height. 1,27mm Rated @ -3dB FW/CLP Insertion Loss 17,7mm Stack Height Single-Ended 3.0 GHz / 6.0 Gbps Signaling Differential Pair 4.0 GHz / 8.0 Gbps Signaling Performance data for other stack heights and complete test data available at www.samtec.com?FW or contact sig@samtec.com. ALSO AVAILABLE NO. PINS PER ROW FW 02 thru 50 LEAD STACKER STYLE HEIGHT Specify LEAD STYLE from chart (5,46) (8,51) (7,11) (10,16) .215 to .335 .280 to .400 -05 (8,64) (15,49) (10,29) (17,15) .340 to .610 .405 to .675 02 No. of positions x (1,27) .050 D -F STACKER HEIGHT -"XXX" = Stacker Height (in inches) = Gold flash on post, Matte Tin on tail -L STACKER + POST -03 * Smaller stack heights. Call Samtec. PLATING OPTION LEAD STYLE BILITY EL AVAILA TAPE & RE arges. No tooling chthe lesser of der is Minimum orantity or 125 pieces. a full reel quantity above minimum. Order any qudesign, manufacture. In-house turn-around. Quick (0,41) .016 SQ -"XXX" = Post Height (in inches) = 10" (0,25m) Gold on post, Gold flash on tail (3,45) .136 x (5,08) .200 100 (4,76) .188 01 (1,27) .050 99 (1,19) .047 POST HEIGHT (1,65) .065 MIN (1,65mm) .065" minimum Example: -065 = (1,65mm) .065" -G (4,27) .168 (4,06) .160 (0,76) .030 -ES -P STACKER HEIGHT s ion for specificat Call Samtecring information. and orde POST HEIGHT Example: -250 = (6,35mm) .250" = 10" (0,25m) Gold on post, Matte Tin on tail (3,42) .135 (1,27) .050 Surface mount (2,51) .099 (1,91) .075 DIA (3,05) .120 (2,92) .115 -EP Note: This Series is non-standard, non-returnable. WWW.SAMTEC.COM (0,89) .035 DIA (0,86) .034 OPTION -ES = End Shroud (-075 post height only. Mate only with CLP) (5,46mm) .215" to (15,49mm) .610" stacker height only 9 pins/row min. -EP = End Shroud with Guide Post (-075 post height only. Mate only with CLP.) (5,46mm) .215" to (15,49mm .610" stacker height only) 9 pins/row min. -A = Alignment Pin (3 positions min.) (5,46mm) .215" to (15,75mm) .620" stacker height only -P = Pick & Place Pad (5 positions min.) -TR -A = Tape & Reel (Post+Stacker Height = (17,46mm) .6875 max.)