Loose R82 MKT Series Taped METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS Typical applications: by-passing, blocking, coupling, decoupling, timing, oscillator circuits. For inverter applications please refer to RSB Series. B Od 0.05 p = 5mm PRODUCT CODE: R82 All dimensions are in mm. 6 0.5 >6 0.6 Pitch Box thickness (B) (mm) (mm) 5.0 5.0 <4.5 4.5 Maximum dimensions (mm) B max H max L max B +0.1 B +0.1 H +0.1 H +0.1 L +0.2 L +0.3 GENERAL TECHNICAL DAta Dielectric: polyester film (polyethylene terephthalate). The part number, comprising 14 digits, is formed as follows: Plates: aluminium layer deposited by evaporation under 1 2 3 4 5 6 7 8 9 10 11 12 13 14 vacuum. Winding: non-inductive type. R 8 2 C Leads: tinned wire. Protection: plastic case, thermosetting resin filled. Digit 1 to 3 Series code. Box material is solvent resistant and flame Digit 4 d.c. rated voltage: retardant according to UL94. C= 50V D= 63VE= 100V Marking: Capacitance, tolerance, D.C. rated voltage. I =250V M=400V Climatic category: 55/105/56 IEC 60068-1 Digit 5 Pitch: C = 5 mm Operating temperature range: -55 to +105C Digit 6 to 9 Digits 7 - 8 - 9 indicate the first three digits of Related documents: IEC 60384-2 Capacitance value and the 6th digit indicates the number of zeros that must be added to obtain the Rated Capacitance in pF. Digit 10 to 11 Mechanical version and/or packaging (table1) Digit 12 Identifies the dimensions and electrical characteristics. Internal use Digit 13 Digit 14 Capacitance tolerance: J=5%; K=10%; M=20%. Product code system Table 1 (for more detailed information, please refer to page 14). Standard packaging style Lead length Ordering code (mm) (Digit 10 to 11) AMMO-PACK DQ Reel O 355 mm CK Loose, short leads 4 +1.5 AA Loose, long leads 17 Z3 09/2008 +1/-2 Winding scheme single sided metallized polyester film 26 R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS a) STACKED version p = 5 mm PRODUCT CODE: R82 b) WOUND version Rated Cap. 50Vdc/30Vac Std dimensions Max dv/dt Max K0 B H L p (V/s) (V2/s) 11.0 a) 2.2 F 6.0 7.2 5.0 100 10.0 E3 b) 3.3 F 7.2 13.0 7.2 5.0 25 2.5 E3 b) 4.7 F 7.2 13.0 7.2 5.0 25 2.5 E3 Part Number R82CC4220--7-R82CC4330--3-R82CC4470--3-- Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) STACKED version Rated Cap. 63Vdc/40Vac Std dimensions B 0.10 F 0.15 F 0.22 F 0.33 F 0.47 F 0.68 F 1.0 F 1.5 F 2.5 2.5 2.5 3.5 3.5 4.5 5.0 6.0 Rated Cap. H 6.5 6.5 6.5 7.5 7.5 9.5 10.0 11.0 L 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 p 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 100Vdc/63Vac Std dimensions Max dv/dt Max K0 (V/s) 160 (V2s) 20 E3 160 20 E3 160 20 E3 160 20 E3 160 20 E3 160 20 E3 160 20 E3 160 20 E3 Max dv/dt Max K0 B H L p (V/s) (V2/s) 1000 pF 2.5 6.5 7.2 5.0 200 40 E3 1500 pF 2.5 6.5 7.2 5.0 200 40 E3 2200 pF 2.5 6.5 7.2 5.0 200 40 E3 3300 pF 2.5 6.5 7.2 5.0 200 40 E3 4700 pF 2.5 6.5 7.2 5.0 200 40 E3 6800 pF 2.5 6.5 7.2 5.0 200 40 E3 0.010 F 0.015 F 0.022 F 0.033 F 0.047 F 0.068 F 0.10 F 0.15 F 0.22 F 0.33 F 0.47 F 0.68 F 1.0 F 2.5 6.5 7.2 5.0 200 40 E3 2.5 6.5 7.2 5.0 200 40 E3 2.5 6.5 7.2 5.0 200 40 E3 2.5 6.5 7.2 5.0 200 40 E3 2.5 6.5 7.2 5.0 200 40 E3 2.5 6.5 7.2 5.0 200 40 E3 2.5 6.5 7.2 5.0 200 40 E3 3.5 7.5 7.2 5.0 200 40 E3 3.5 7.5 7.2 5.0 200 40 E3 4.5 9.5 7.2 5.0 200 40 E3 4.5 9.5 7.2 5.0 200 40 E3 5.0 10.0 7.2 5.0 200 40 E3 6.0 11.0 7.2 5.0 200 40 E3 Rated Cap. Part Number R82DC3100--5-R82DC3150--6-R82DC3220--6-R82DC3330--6-R82DC3470--6-R82DC3680--6-R82DC4100--6-- R82DC4150--6-- 250Vdc/140Vac Reduced sizes Std dimensions B H L p 0.022 F 2.5 6.5 7.2 5.0 0.047 F 3.5 7.5 7.2 5.0 65 E3 R82IC2470--6-- 130 65 E3 R82IC2680--6-- 9.5 7.2 5.0 130 65 E3 R82IC3100--6-- 0.15 F 5.0 10.0 0.22 F 6.0 11.0 7.2 5.0 130 65 E3 R82IC3150--6-- 7.2 5.0 130 65 E3 R82IC3220--6-- Max dv/dt (V/s) 250 Max K0 Part Number (V2/s) 125 E3 R82IC1680--5- R82EC2220--5-- Rated Cap. R82EC1330--5-R82EC1470--5-R82EC1680--5-R82EC2150--5-R82EC2330--5-R82EC2470--6-R82EC2680--6-- 6800 pF R82EC3100--7-- 0.015 F R82EC3150--7-- 0.033 F R82EC3220--7-- 0.047 F R82EC3330--7-- 0.068 F R82EC3680--7-- Rated Cap. R82EC3470--7-R82EC4100--7-- 1000 pF Mechanical version and packaging (Table1) Internal use Tolerance: J (5%); K (10%); M (20%) 1500 pF 2200 pF 3300 pF All dimensions are in mm. (V2/s) 65 E3 R82IC2220--6-- 130 R82EC2100--5-- R82EC1220--5-- (V/s) 130 5.0 6800 pF R82EC1150--5-- Part Number 7.2 0.010 F 0.015 F 0.022 F 0.033 F 0.047 F 0.068 F 0.10 F 0.15 F R82EC1100--5-- Max K0 7.5 0.068 F 3.5 0.10 F 4.5 Rated Cap. Part Number Max dv/dt 4700 pF 6800 pF 250Vdc/160Vac Std dimensions B H L p 2.5 6.5 7.2 5.0 R82IC2100--5-- 2.5 6.5 7.2 5.0 250 125 E3 2.5 6.5 7.2 5.0 250 125 E3 3.5 7.5 7.2 5.0 250 125 E3 3.5 7.5 7.2 5.0 250 125 E3 4.5 9.5 7.2 5.0 250 125 E3 4.5 9.5 7.2 5.0 250 125 E3 5.0 10.0 7.2 5.0 250 125 E3 6.0 11.0 7.2 5.0 250 125 E3 R82IC3150--5-- Max dv/dt Max K0 Part Number 400Vdc/160Vac Reduced sizes Std dimensions B H L p 2.5 3.5 4.5 5.0 6.0 6.5 7.5 9.5 10.0 11.0 7.2 7.2 7.2 7.2 7.2 5.0 5.0 5.0 5.0 5.0 400Vdc/200Vac Std dimensions B H L p 2.5 2.5 2.5 2.5 2.5 3.5 3.5 4.5 4.5 5.0 6.0 6.5 6.5 6.5 6.5 6.5 7.5 7.5 9.5 9.5 10.0 11.0 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 7.2 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 (V/s) (V2s) 200 160 E3 200 160 E3 200 160 E3 200 160 E3 200 160 E3 Max dv/dt (V/s) Max K0 400 320 E3 400 320 E3 400 320 E3 400 320 E3 400 320 E3 400 320 E3 R82IC2150--5-- R82IC2220--5-R82IC2330--5-- R82IC2470--5-R82IC2680--5-- R82IC3100--55- R82MC1680--6-R82MC2150--6-- R82MC2330--6-- R82MC2470--6-R82MC2680--6-Part Number (V2s) Note: If the working voltage (V) is lower than the rated 0.010 F 400 320 E3 voltage (VR), the capacitor may work at higher dv/dt. 0.015 F 400 320 E3 In this case the maximum value allowed is obtained 0.022 F 400 320 E3 multiplying the above value (see table dv/dt) with the 0.033 F 400 320 E3 ratio VR /V. 0.047 F 400 320 E3 The pulse characteristic K0 depends on the voltage wave-form and in any case it cannot overcome the Mechanical version and packaging (Table1) Internal use value given in the above table. R82MC1100--5-R82MC1150--5-- R82MC1220--5-- R82MC1330--5-R82MC1470--5-- R82MC1680--5-- R82MC2100--5-R82MC2150--5-- R82MC2220--5-R82MC2330--5-- R82MC2470--5-- Tolerance: J (5%); K (10%); M (20%) 27 09/2008 R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R82 electrical characteristics test method and performance Rated voltage (VR): 50Vdc 63Vdc 100Vdc 250Vdc 400Vdc Rated temperature (TR): +85C Capacitance values: E6 series (IEC 60063 Norm). Damp heat, steady state: Test conditions Temperature: +40C2C Relative humidity (RH): 93% 2% Test duration: 56 days Performance Capacitance change |C/C|: 5% DF change (tg): 50x10-4 at 1kHz Insulation resistance: 50% of initial limit. Temperature derated voltage: for temperatures between +85C and +105C a decreasing factor of 1.25% per degree C on the rated voltage VR (d.c. and a.c.) has to be applied. 1000pF to 4.7F Capacitance range: Capacitance tolerances (measured at 1 kHz): 5% (J); 10% (K); 20% (M). Total self-inductance (L): 7nH max 1 nH per 1 mm lead and capacitor length. Dissipation factor (DF): tg10-4 at +25C 5C kHz C 0.1F 1 10 100 80 120 250 C > 0.1F 80 120 Insulation resistance: Test conditions Temperature: +25C5C Voltage charge time: 1 min Voltage charge: 50 Vdc for VR <100 Vdc 100 Vdc for VR 100 Vdc Performance For VR 100 Vdc 15000 M for C 0.33F 5000 s for C > 0.33F and 1F 1000 s for C > 1F For VR >100 Vdc 30000 M *Typical value Test voltage between terminations: 1.4xVR applied for 2 s at +25C5C. 09/2008 Endurance: Test conditions +105C 2C Temperature: Test duration: 2000 h Voltage applied: 1.25xVC Performance Capacitance change |C/C|: 5% DF change (tg): 30x10-4 at 10kHz for C1F 20x10-4 at 1kHz for C>1F Insulation resistance: 50% of initial limit. Resistance to soldering heat: Test conditions +260C5C Solder bath temperature: Dipping time (with heat screen):10 s 1 s Performance Capacitance change |C/C|: 2% DF change (tg): 30x10-4 at10kHz for C 1F 20x10-4 at 1kHz for C>1F Insulation resistance: initial limit. Long term stability (after two years): Storage: standard environmental conditions (see page 12). Performance Capacitance change |C/C|: 3%for C 0.1F 2%for C> 0.1F Reliability: Reference MIL HDB 217 Application conditions: +40C2C Temperature: Voltage: 0.5xVR Failure rate: 1 FIT (1 FIT = 1x10-9 failures/components x h) Failure criteria: (according to DIN 44122) Short or open circuit Capacitance change |C/C|: > 10% DF change (tg): > 2 x initial limit. Insulation resistance: < 0.005 x initial limit. 28 R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R82 MAX. VOLTAGE (Vr.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) 29 09/2008 R82 MKT Series METALLIZED POLYESTER FILM CAPACITOR D.C. MULTIPURPOSE APPLICATIONS p = 5 mm PRODUCT CODE: R82 MAX. CURRENT (Ir.m.s.) VERSUS FREQUENCY (sinusoidal wave-form / Th 40C) 1 Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute - and we specifically disclaim - any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by us with reference to the use of our products is given gratis, and we assume no obligation or liability for the advice given or results obtained.