SEK IEC 60 603-13 Number of contacts 6--64 Low-profile male header, straight solder pins Identification No. of contacts Part No. Drawing Male header with straight solder pins Male header with straight solder pins Length: 4.5 mm 6 09 18 506 324 No. of contacts 6 15.2 12.78 2.54 x 2 = 10 09 18 510 324 10 20.3 17.86 2.54 x 4 = 10.16 14 09 18 514 324 14 25.4 22.94 2.54 x 6 = 15.24 16 09 18 516 324 16 27.9 25.48 2.54 x 7 = 17.78 20 09 18 520 324 20 33.0 30.56 2.54 x 9 = 22.86 26 09 18 526 324 26 40.6 38.18 2.54 x 12 = 30.48 34 09 18 534 324 34 50.8 48.34 2.54 x 16 = 40.64 40 09 18 540 324 40 58.4 55.96 2.54 x 19 = 48.26 50 09 18 550 324 50 71.3 68.66 2.54 x 24 = 60.96 60 09 18 560 324 60 84.0 81.36 2.54 x 29 = 73.66 64 09 18 564 324 64 89.1 86.44 2.54 x 31 = 78.74 6 09 18 506 322* 10 09 18 510 322* 14 09 18 514 322* 16 09 18 516 322* 20 09 18 520 322* 26 09 18 526 322* 34 09 18 534 322* 40 09 18 540 322* 50 09 18 550 322* 60 09 18 560 322* 64 09 18 564 322* For performance level 3 please specify digit For performance level 2 please specify digit > 0.76 m Au (30 inch) on request Identification No. of contacts A B E 5.08 Solder pins for 0.9 mm dia. hole SEK Length: 2.9 mm Dimensions in mm 7 6 5 * Part No. Drawing Locking lever for female connector with strain relief Dimensions in mm Strain relief clamp in conjunction with lowprofile male header When the security of latching is required and space is a premium, these locking levers can be fitted onto the strain relief of the HARTING female connector. * Not normally kept in stock 5) Order 2 per female connector Female connector 09 18 000 99055) Low-profile male header 1) 2) Contact number 1 No polarization slot for 6, 10 or 14 way male header 3) No polarization slot for 6 way male header 4) Pitch tolerance: 0.1 09 . 13