SEK
6 09 18 506 324 6
10 09 18 510 324 10
14 09 18 514 324 14
16 09 18 516 324 16
20 09 18 520 324 20
26 09 18 526 324 26
34 09 18 534 324 34
40 09 18 540 324 40
50 09 18 550 324 50
60 09 18 560 324 60
64 09 18 564 324 64
6 09 18 506 322*
10 09 18 510 322*
14 09 18 514 322*
16 09 18 516 322*
20 09 18 520 322*
26 09 18 526 322*
34 09 18 534 322*
40 09 18 540 322*
50 09 18 550 322*
60 09 18 560 322*
64 09 18 564 322*
7
6
5*
09 18 000 99055)
SEK IEC 60 603-13
09
.
13
No. of
Identification contacts Part No. Drawing Dimensions in mm
Number of contacts
6--64
For performance level 3 please specify digit
For performance level 2 please specify digit
> 0.76 µm Au (30 µinch) on request
* Not normally kept in stock
5) Order 2 per female connector
Male header with
straight solder pins
Length: 2.9 mm
Male header with
straight solder pins
Length: 4.5 mm
No. of
Identification contacts Part No. Drawing Dimensions in mm
Locking lever for
female connector
with strain relief
in conjunction with low-
profile male header
When the security of
latching is required and
space is a premium,
these locking levers can
be fitted onto the strain
relief of the HARTING
female connector.
Strain relief clamp
Female connector
Low-profile male header
Low-profile male header, straight solder pins
Solder pins for
0.9 mm dia. hole
No. of AB E
contacts
15.2 12.78 2.54 x 2 = 5.08
20.3 17.86 2.54 x 4 = 10.16
25.4 22.94 2.54 x 6 = 15.24
27.9 25.48 2.54 x 7 = 17.78
33.0 30.56 2.54 x 9 = 22.86
40.6 38.18 2.54 x 12 = 30.48
50.8 48.34 2.54 x 16 = 40.64
58.4 55.96 2.54 x 19 = 48.26
71.3 68.66 2.54 x 24 = 60.96
84.0 81.36 2.54 x 29 = 73.66
89.1 86.44 2.54 x 31 = 78.74
1) Contact number 1
2) No polarization slot
for 6, 10 or 14 way male header
3) No polarization slot
for 6 way male header
4) Pitch tolerance: ± 0.1
