Commercial Chip - C0G 16Vdc to 10kVdc A range of commercial MLC chip capacitors in Ultra stable EIA Class I C0G, or NP0, dielectric. C0G chips are used in precision circuitry requiring Class I stability and exhibit linear temperature coefficient, low loss and stable electrical properties with time, voltage and frequency. Standard EIA case sizes and available C/V values are listed below - special sizes, thicknesses and other voltage ratings are available; please contact the sales office for information. Designed for surface mount application with nickel barrier terminations making them suitable for solder wave and reflow solder board attachment as well as vapor phase attachment for part sizes 2225 or smaller. Silver-palladium terminations are also available for hybrid use with conductive epoxy. Capacitance and voltage selection for popular chip sizes Size 0402 0504 0603 0805 1005 1206 1210 1515 1808 1812 1825 Min cap. 0R3 0R5 0R3 0R5 0R5 3R0 5R0 3R0 5R0 5R0 100 100 150 150 Tmax 0.024 0.61 0.044 1.12 0.035 0.89 0.054 1.37 0.054 1.37 0.064 1.63 0.065 1.63 0.130 3.02 0.065 1.63 0.080* 2.03 0.065 1.63 0.100* 2.54 0.080 2.03 0.140* 3.56 16V 271 222 152 562 822 153 273 473 393 393 563 563 104 104 25V 221 182 122 472 682 123 273 393 333 333 563 563 104 104 50V 181 152 102 392 562 123 223 333 223 273 393 393 104 104 100V 181 152 102 392 562 103 183 333 153 223 273 393 683 823 200V 101 821 561 182 272 562 103 223 103 153 183 273 473 683 250V 560 561 331 152 222 392 822 223 682 103 153 223 393 563 300V * * * 821 122 272 472 153 472 562 103 153 223 473 400V * * * 821 122 182 472 103 472 472 103 123 223 333 500V * * * 821 122 182 392 822 472 472 103 123 223 273 600V * * * 681 102 152 332 682 392 472 822 103 183 183 800V * * * 681 102 152 332 682 392 472 822 103 183 183 1kV * * * 471 391 102 222 562 222 332 472 822 103 153 1.5kV * * * * * 561 122 392 122 182 272 472 562 103 2kV * * * * * 391 821 272 821 122 182 272 272 562 3kV * * * * * * * 122 391 471 821 122 122 222 4kV * * * * * * * 681 221 271 471 821 681 122 5kV * * * * * * * * * * * * 391 821 6kV * * * * * * * * * * * * * * 7kV * * * * * * * * * * * * * * 8kV * * * * * * * * * * * * * * 9kV * * * * * * * * * * * * * * 10kV * * * * * * * * * * * * * * inches: mm: Units rated above 800V may require conformal coating to preclude arcing over chip surface 16 | Phone: +1.661.295.5920 | www.novacap.com Commercial Chip - C0G 16Vdc to 10kVdc l For dielectric characteristics see page 4. l For dimensions see page 12. l For termination options see pages 3 & 15. l For capacitance tolerances available see page 15. l For ordering information see page 15. Note: Maximum capacitance values are shown below as 3 digit code: 2 significant figures followed by the no. of zeros e.g. 183 = 18,000pF. R denotes decimal e.g. 2R7 = 2.7pF. Capacitance and voltage selection for popular chip sizes 2020 2221 2225 2520 3333 3530 4040 4540 5440 5550 6560 7565 Size Min cap. 270 270 270 270 390 390 390 390 390 390 390 560 101 0.180 4.57 0.080 2.03 0.080 2.03 0.150* 3.81 0.180 4.57 0.250 6.35 0.250 6.35 0.300 7.62 0.300 7.62 0.300 7.62 0.300 7.62 0.300 7.62 0.300 7.62 683 104 124 124 104 184 184 334 334 394 394 684 824 16V 683 104 124 124 104 184 184 334 334 394 394 684 824 25V 683 104 124 124 104 154 184 274 334 394 394 684 824 50V 563 683 823 104 823 124 154 224 274 274 274 474 564 100V 563 473 563 823 683 104 124 184 224 274 274 474 564 200V 473 393 473 683 563 104 124 184 204 224 224 394 474 250V 393 223 273 563 473 823 104 154 184 224 224 394 474 300V 333 223 273 393 393 563 823 124 154 184 184 334 394 400V 273 223 273 333 393 473 683 104 124 154 184 274 334 500V 153 183 273 273 223 393 393 823 823 104 154 224 274 600V 153 183 273 273 183 333 333 563 683 823 124 184 224 800V 103 103 153 223 123 273 273 563 563 683 104 154 184 1kV 822 562 822 153 103 183 223 393 393 393 563 823 124 1.5kV 472 272 392 822 562 153 153 273 333 333 473 683 104 2kV 222 122 182 332 272 822 103 183 223 223 333 473 683 3kV 122 681 102 182 152 332 562 123 123 123 183 273 393 4kV 821 391 561 122 102 222 332 682 822 822 123 183 223 5kV * * * * * 182 182 392 392 472 562 103 123 6kV * * * * * * 122 272 272 332 472 682 822 7kV * * * * * * 102 222 222 272 332 562 682 8kV * * * * * * 821 152 182 182 272 392 472 9kV * * * * * * 681 122 152 152 222 332 392 10kV :inches :mm Tmax * Denotes non standard chip thickness. Order code needs to have an 'X' inserted together with the dimension in inches e.g. X080 where dimension is 0.080" www.novacap.com | Phone: +1.661.295.5920 | 17 Case Size Dielectric Capacitance Capacitance Tolerance Voltage Termination Special Thickness High Reliability Testing Packaging Marking XX 1206 N 472 J 101 N X050 H T M High Reliability Test Criteria Prefix Chip Ordering Information - HB Capacitance Code 1st two digits are significant, third digit denotes number of zeros, R = decimal Examples: 1R0 = 1.0pF Special Thickness Packaging Marking 120 = 12pF None Standard thickness as per Novacap catalog specifications None Bulk None Unmarked 471 = 470pF X 102 = 1,000pF 273 = 0.027F 474 = 0.47F 105 = 1.0F Denotes a special thickness other than standard. Specify in inches if required. (As shown above X = 0.050") C0G/NP0 Ultra Stable M C0G/NP0 Ultra Stable Magnetic Free F C0G/NP0 High Temp. (up to 160C) D C0G/NP0 High Temp. (up to 200C) K R3L R R2D Pulse Energy Y5V General Purpose Z Z5U General Purpose B X7R Stable C X7R Stable Magnetic Free X BX MIL S X8R E Waffle Pack None Standard product H High Reliability Testing H High Temp Screening M Marked *Marking not available on sizes < 0603 { Hi-Reliability Testing Criteria HB MIL-PRF-55681 Group A HV MIL-PRF-49467 Group A HS MIL-PRF-123 Group A Termination Codes Voltage Code Ultra Stable Y Tape & Reel High Reliability Testing Dielectric Codes N T W 1st two digits are significant, third digit denotes number of zeros. For example: 160 = 16 Volts 101 = 100 Volts 501 = 500 Volts High Temp. (up to 150C) 102 = Class II High Temp. (up to 200C) 502 = G Class II High Temp. (up to 160C) W X5R Stable RN Lead free C0G/NP0 Ultra Stable RB Lead free X7R Stable BB X7R BME Stable BW X5R BME Stable 103 = P Palladium Silver PR Palladium Silver* K Solderable Palladium Silver* N Nickel Barrier* 100% tin Y Nickel Barrier 90% tin, 10% lead NG Nickel Barrier Gold Flash* C FlexiCapTM/Nickel Barrier* 100% tin D FlexiCapTM/Nickel Barrier 90% tin, 10% lead 1,000 Volts B Copper Barrier* 100% tin 5,000 Volts E Copper Barrier 90% tin, 10% lead 10,000 Volts S Silver* * Indicates RoHS terminations Capacitance Tolerance Codes Code Tolerance N M B 0.10pF * * Prefix Definitions C 0.25pF * * None D 0.50pF * * Cap. Value < 10pF * Not RF series Standard chip Y5V R3L R2D Z5U C0G/NP0 F/D K R Y/Z X7R BX X8R B C X S Positive Class X5R VTC II E/G W P * * RF Improved ESR Capacitor p. 23 F 1% * * * LS Y3 Certified Safety Capacitor p. 42 - 43 G 2% * * * * ES Y Certified Safety Capacitor p. 42 - 43 J 5% * * * * * ** * ** * * ST Stacked Capacitor Assembly p. 48 - 53 K 10% * * * * * * * * * * * * SM Stacked Hi-Rel Capacitor Assembly p. 48 - 53 M 20% * * * * * * * * * * * * CR Cap-Rack Capacitor Array p. 54 Z +80% -20% * * * ** * RC Bleed Resistor p. 58 - 61 P +100% -0% * * * ** * 2 www.novacap.com | Phone: +1.661.295.5920 | 15 T Technical Summary W Technical Information Novacap provides application notes throughout this catalog as a guide to chip selection and attachment methods. Refer to the Novacap Technical Brochure found at www.novacap. com for more details. This technical information includes the nature of capacitance, dielectric properties, electrical properties, classes of dielectrics, ferroelectric behavior, test standards, and high reliability test plans. Please do not hesitate to contact the sales office for any product or technical assistance. C0G/NP0: Ultra stable Class I dielectric, with negligible dependence of capacitance on temperature, voltage, frequency, and time. Used in circuitry requiring very stable performance. X7R: Stable Class II dielectric, with predictable change in properties across a temperature range of -55C to +125C. Used as blocking, decoupling, bypassing, and frequency discriminating elements. This dielectric is ferroelectric and provides higher capacitance than Class I materials. Capacitor Size Size availability is based primarily on capacitance values and voltage rating. Smaller units are generally less expensive. Because mass affects the thermal shock susceptibility of chip capacitors, size selection should consider the soldering method used to attach the chip to the board. Sizes 1812 and smaller can be wave, vapor phase, or reflow soldered. Larger units require reflow soldering. BX: The military specification for ceramic chip capacitors (MILPRF-55681) defines a mid-K stable dielectric designated as BX. The BX specification has voltage temperature limits in addition to temperature limits of capacitance. The BX dielectric is limited to 15% maximum change in capacitance between 25C and -55C or +125C and also has a voltage restriction of +15% / -25% maximum change in capacitance between 25C and -55C or +125C at rated voltage. Chip Selection Multilayer capacitors (MLC) are categorized by dielectric performance with temperature. The Temperature Coefficient of Capacitance describes the variance of capacitance value with temperature. The choice of components is therefore largely determined by the temperature stability required of the device and the size necessary for the desired capacitance value and voltage rating. * * * * * * * * * * * * * * * * * * * * * * * * FlexiCapTM/Nickel Barrier 100% tin RoHS RoHS NG C * * * * * * * * * * * * D * * * Solderable Silver Y * * * * * * Nickel Barrier Gold flash Nickel Barrier 90/10% tin/lead Nickel Barrier 100% tin Solderable Palladium Silver RoHS RoHS RoHS PR K N * * * * * * * * * * * * * * Copper Barrier 90/10% tin/lead P * * * Termination Material Copper Barrier 100% tin Code N/RN K B/RB BB BW X Y Z M C S F D G E P R Palladium Silver Palladium Silver Dielectric C0G/NP0 R3L X7R X7R BME X5R BME BX Y5V Z5U C0G/NP0 (Mag free) X7R (Mag free) X8R C0G/NP0 (160C) C0G/NP0 (200C) Class II (160C) Class II (200C) Pulse Power R2D FlexiCapTM/Nickel Barrier 90/10% tin/lead Z5U/Y5V: General purpose Class III dielectrics with higher dielectric constant and greater variation of properties over temperature and voltage. Very high capacitance per volume is attainable for general purpose applications where stability over a wide temperature range is not critical. Packaging Units are available reeled, in waffle pack, or bulk packaged. Bar coded labels are standard for reeled and bulk packaging. Dielectric Termination Combinations RoHS B E RoHS S * * * * * * * * * * * * * * MB Primary Dielectric Types * * * * * * We recommend the following termination types: Solder Attachment: N Nickel Barrier, 100% matte tin plated - RoHS C FlexiCapTM with Nickel Barrier, 100% tin plated - RoHS Y Nickel Barrier, tin-lead plated D FlexiCapTM Nickel Barrier, tin-lead plated B Copper Barrier 100% matte tin plated - RoHS E Copper Barrier, tin-lead plated K Solderable Palladium Silver RoHS (suitable for conductive epoxy attach) * * S * * * * * Solderable Silver - RoHS Conductive Epoxy attachment: P Palladium Silver PR Palladium Silver - RoHS NG Nickel Barrier Gold Flash RoHS (suitable for soldering attach) www.novacap.com | Phone: +1.661.295.5920 | 3 Dielectric Characteristics C0G/NP0 (N) Ultra Stable and RoHS 2013 (RN) type -55C to 125C Temperature coefficient: 0 30 ppm/C Dissipation factor: 0.1% max @ 25C Insulation resistance Dielectric withstanding voltage @25C: @125C: <200V: 201-500V: >500V: >100GW or >1000WF whichever is less >10GW or >100WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 0% per decade Test parameters: 1KHz, 1.0 0.2 VRMS, 25C 1MHz for Capacitance <100pF TEMPERATURE COEFFICIENT DC ppm 50 % CAPACITANCE CHANGE Operating temperature range: UPPER LIMIT 25 0 TYPICAL -25 LOWER LIMIT -50 -55 -25 0 25 50 75 100 125 100 125 TEMPERATURE C C0G/NP0 (M) Ultra Stable Non Magnetic -55C to 125C Temperature coefficient: 0 30 ppm/C Dissipation factor: 0.1% max @ 25C Insulation resistance Dielectric withstanding voltage @25C: @125C: <200V: 201-500V: >500V: >1000WF or >10000WF whichever is less >100WF or >1000WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 0% per decade Test parameters: 1KHz, 1.0 0.2 VRMS, 25C 1MHz for Capacitance <100pF TEMPERATURE COEFFICIENT DC ppm 50 % CAPACITANCE CHANGE Operating temperature range: UPPER LIMIT 25 0 TYPICAL -25 LOWER LIMIT -50 -55 -25 0 25 50 75 TEMPERATURE C C0G/NP0 (F) Ultra Stable High Temperature (up to 160C) -55C to 160C Temperature coefficient: 0 30 ppm/C Dissipation factor: 0.1% max @ 25C Insulation resistance Dielectric withstanding voltage @25C: @160C: <200V: 201-500V: >500V: >100GW or >1000WF whichever is less >1GW or >10WF whichever is less 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 0% per decade Test parameters: 1KHz, 1.0 0.2 VRMS, 25C 1MHz for Capacitance <100pF TEMPERATURE COEFFICIENT DC ppm 40 % CAPACITANCE CHANGE Operating temperature range: 20 0 -20 -40 -55 -25 0 25 50 75 100 125 150 TEMPERATURE C C0G/NP0 (D) Ultra Stable High Temperature (up to 200C) -55C to 200C Temp. coefficient <200C: 0 30 ppm/C Dissipation factor @ 25C: 0.1% Max. Insulation resistance >100GW or >1000WF whichever is less >1GW or >10WF whichever is less Dielectric withstanding voltage @25C: @200C: <200V: 201-500V: >500V: 250% 150% or 500V whichever is greater 120% or 750V whichever is greater Ageing rate: 0% per decade Test parameters: 1KHz, 1.0 0.2 VRMS, 25C 1MHz for capacitance <100pF 4 | Phone: +1.661.295.5920 | www.novacap.com TEMPERATURE COEFFICIENT DC ppm 40 % CAPACITANCE CHANGE Operating temperature range: 20 0 -20 -40 -55 -25 0 25 50 75 100 TEMPERATURE C 125 150 175 200 Chip Dimensions L T W MB Dimensions - inches (mm) Size Length (L) Width (W) Max. Thickness (T)* Termination Band (MB) 0402 0.040 0.004 (1.02 0.102) 0.020 0.004 (0.508 0.102) 0.024 (0.610) 0.010 0.006 (0.254 0.152) 0504 0.050 0.006 (1.27 0.152) 0.040 0.006 (1.02 0.152) 0.044 (1.12) 0.014 0.006 (0.356 0.152) 0.055 +0.015 -0.010 (1.4 +0.38 -0.25) 0.055 0.015 (1.40 0.381) 0.057 (1.45) 0.014 0.006 (0.356 0.152) 0603 0.060 0.006 (1.52 0.152) 0.030 0.006 (0.762 0.152) 0.035 (0.889) 0.014 0.006 (0.356 0.152) 0805 0.080 0.008 (2.03 0.203) 0.050 0.008 (1.27 0.203) 0.054 (1.37) 0.020 0.010 (0.508 0.254) 0907 0.090 0.008 (2.29 0.203) 0.070 0.008 (1.78 0.203) 0.060 (1.52) 0.020 0.010 (0.508 0.254) 1005 0.100 0.008 (2.54 0.203) 0.050 0.008 (1.27 0.203) 0.054 (1.37) 0.020 0.010 (0.508 0.254) 0.110+0.025 -0.010 (2.79 +0.64 -0.25) 0.110 0.015 (2.79 0.381) 0.102 (2.59) 0.020 0.010 (0.508 0.254) 1206 0.125 0.008 (3.18 0.203) 0.060 0.008 (1.52 0.203) 0.064 (1.63) 0.020 0.010 (0.508 0.254) 1210 0.125 0.008 (3.18 0.203) 0.100 0.008 (2.54 0.203) 0.065 (1.65) 0.020 0.010 (0.508 0.254) 1515 0.150 0.015 (3.81 0.381) 0.150 0.015 (3.81 0.381) 0.130 (3.30) 0.030 0.015 (0.762 0.381) 1808 0.180 0.012 (4.57 0.305) 0.080 0.008 (2.03 0.203) 0.065 (1.65) 0.024 0.014 (0.610 0.356) 1812 0.180 0.012 (4.57 0.305) 0.125 0.008 (3.18 0.203) 0.065 (1.65) 0.024 0.014 (0.610 0.356) 1825 0.180 0.012 (4.57 0.305) 0.250 0.015 (6.35 0.381) 0.080 (2.03) 0.024 0.014 (0.610 0.356) 2020 0.200 0.015 (5.08 0.381) 0.200 0.015 (5.08 0.381) 0.180 (4.57) 0.024 0.014 (0.610 0.356) 2221 0.220 0.015 (5.59 0.381) 0.210 0.015 (5.33 0.381) 0.080 (2.03) 0.030 0.015 (0.762 0.381) 2225 0.220 0.015 (5.59 0.381) 0.250 0.015 (6.35 0.381) 0.080 (2.03) 0.030 0.015 (0.762 0.381) 2520 0.250 0.015 (6.35 0.381) 0.200 0.015 (5.08 0.381) 0.180 (4.57) 0.030 0.015 (0.762 0.381) 0.230 +0.020 -0.012 (5.84 +0.51 -0.30) 0.250 0.015 (6.35 0.381) 0.165 (4.19) 0.030 0.015 (0.762 0.381) 3333 0.330 0.017 (8.38 0.432) 0.330 0.017 (8.38 0.432) 0.250 (6.35) 0.030 0.015 (0.762 0.381) 3530 0.350 0.018 (8.89 0.457) 0.300 0.015 (7.62 0.381) 0.250 (6.35) 0.030 0.015 (0.762 0.381) 4040 0.400 0.020 (10.2 0.508) 0.400 0.020 (10.2 0.508) 0.300 (7.62) 0.040 0.020 (1.02 0.508) 4540 0.450 0.023 (11.4 0.584) 0.400 0.020 (10.2 0.508) 0.300 (7.62) 0.040 0.020 (1.02 0.508) 5440 0.540 0.027 (13.7 0.686) 0.400 0.020 (10.2 0.508) 0.300 (7.62) 0.040 0.020 (1.02 0.508) 5550 0.550 0.028 (14.0 0.711) 0.500 0.025 (12.7 0.635) 0.300 (7.62) 0.040 0.020 (1.02 0.508) 6560 0.650 0.033 (16.5 0.838) 0.600 0.030 (15.2 0.762) 0.300 (7.62) 0.040 0.020 (1.02 0.508) 7565 0.750 0.038 (19.1 0.965) 0.650 0.033 (16.5 0.838) 0.300 (7.62) 0.040 0.020 (1.02 0.508) RF0505 RF1111 RF2525 * Non standard thicknesses are available - consult the sales office for details. 12 | Phone: +1.661.295.5920 | www.novacap.com