3,2 2,7 5 x 18 = 90 Variante 1 version 1 Bestuckung kraftlos 0,6 powerless assembly Leiterplatte pcb Ansaughaube nur bei Version 1 hood only on version 1 tray packaging packaging unit 36 pcs 18 6,3 14,8 5,8 max. 138 +0,3 Verpackt in Tray Verpackungseinheit 36 St. 5 x 46,2 = 231 max. 325 Sonstige Angaben siehe Zeichnung 204628 / Additional indications according to drawing 204628 Verpackt in Gurtverpackung - Tape on Reel Packaging Verpackungseinheit: 75 Stuck - Packaging unit: 75 pcs Abspulrichtung - Reel +0,2 39,3 -0,4 25,1 46,2 Pin 1 +0,2 16 off Direction 24 Variante 2 Pin 1 21,2 version 2 Bestuckung mit Kraft 8,25 56 +0,2 56,5 150 330 33,3 0,1 ohne / without Layoutvorschlag: Mutter / nut Bolzen / bolt thread depth max. 3,7 mm thread depth max. 5,5 mm max. Einschraubtiefe 3,7 mm max. Einschraubtiefe 5,5 mm 7 x 2,74 = 19,18 A recommended layout: 1 -0,06 3,7 Gewinde / thread M3 / #4-40 Gewinde / thread M3 / #4-40 3,2 0,1 0,05 2,74 Pin 1 B 6,4 0,05 (15x) +0,09 a 2,84 13,8 12,6 0,3 assembly with force 1,37 B 2,74 6 x 2,74 = 16,44 33,3 0,05 Beschriftung nach Bedruckungsvorschrift 174538 Part marking according to specification 174538 M 1:1 Anschlussbereich verzinnt terminal area tin plating Anforderungsstufe: 2 class: 2 #4-40 M3 234859 234864 234171 234858 234863 234868 Ident-Nr. Ident.-Nr. Ident.-Nr. Variante 1 Variante 1 Variante 2 part-no. tape &reel version 1 part-no. tray version 1 part-no. tray version 2 #4-40 M3 ohne without A Fehlende Masse und Angaben siehe DIN 41652 / Missing information and dimensions according to DIN 41652 Sonstige Angaben siehe Fertigungsunterlagen / Additional indications according to the production documentation X Mutter thread Bolzen Bemerkung bolt remark Copyright by ERNI GmbH Proprietary notice pursuant to ISO 16016 to be observed. 234857 234862 234867 234861 234866 224783 234860 234865 234869 0,05 Sonstige Angaben siehe Zeichnung 204625 / Additional indications according to drawing 204625 Tolerances Information: 2:1 Scale All Dimensions in mm All rights reserved. Only for Information. To ensure that this is the latest version of this drawing, please contact one of the ERNI companies before using. Designation Subject to modification without prior notice. Drawing will not be updated. TMC-P 15-THR-2,7-6,3-BA8 TMC-P 15-THR-2,7-6,3-type 8 144975 www.ERNI.com C 30.11.2009 Index Date Class TMCP I A3