www.vishay.com For technical questions contact: aluminumcaps1@vishay.com Document Number: 28315
1Revision: 18-Apr-12
148 RUS
Vishay BCcomponents
Aluminum Capacitors
Radial, Ultra High CV per Volume, Semi-Professional
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FEATURES
Polarized aluminum electrolytic capacitors,
non-solid electrolyte
Radial leads, cylindrical aluminum case with
pressure relief, insulated with a blue sleeve
Charge and discharge proof
Miniaturized, ultra high CV-product per unit volume
Very long useful life: 3000 h at 105 °C, high reliability
Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
EDP, telecommunication, industrial, automotive and
audio-video
Smoothing, filtering, buffering in SMPS, timing
Portable and mobile equipment (small size, low mass)
MARKING
The capacitors are marked (where possible) with the
following information:
Rated capacitance value (in µF)
Tolerance on rated capacitance, code letter in accordance
with IEC 60062 (M for ± 20 %)
Rated voltage (in V)
Date code, in accordance with IEC 60062
Code indicating factory of origin
Name of manufacturer
Upper category temperature (105 °C)
Negative terminal identification
Series number (148)
Fig.1 Component outline
QUICK REFERENCE DATA
DESCRIPTION VALUE
Nominal case sizes (Ø D x L in mm) 10 x 12 to 18 x 35
Rated capacitance range, CR47 µF to 22 000 µF
Tolerance on CR ± 20 %
Rated voltage range, UR6.3 V to 100 V
Category temperature range - 40 °C to + 105 °C
Endurance test at 105 °C:
case Ø D = 10 mm 1000 h
case Ø D 12.5 mm 2000 h
Useful life at 105 °C:
case Ø D = 10 mm 2000 h
case Ø D 12.5 mm 3000 h
Useful life at 40 °C, 1.6 x IR applied:
case Ø D = 10 mm 140 000 h
case Ø D 12.5 mm 200 000 h
Shelf life at 0 V, 105 °C 1000 h
Based on sectional specification IEC 60384-4/EN130300
Climatic category IEC 60068 40/105/56
SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(µF)
UR (V)
6.3101625355063100
47-------10x12
68-------10x16
100------10x1210x20
150-------12.5x20
220 -----10x1210x1612.5x25
-------16x20
330----10x1210x1612.5x2016x25
470 - - - 10 x 12 10 x 16 10 x 20 12.5 x 20 16 x 31
680 - - 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 -
------16x20-
Document Number: 28315 For technical questions contact: aluminumcaps1@vishay.com www.vishay.com
Revision: 18-Apr-12 2
148 RUS
Aluminum Capacitors
Radial, Ultra High CV per Volume, Semi-Professional
Vishay BCcomponents
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
DIMENSIONS in millimeters, AND AVAILABLE FORMS
Table 1
Note
Tape dimensions see section ‘PACKAGING’.
1000 - 10 x 12 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 -
-----16x20--
1500 - 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31 -
----16x20---
2200 10 x 16 10 x 20 12.5 x 20 12.5 x 25 16 x 25 16 x 31 18 x 35 -
---16x20----
3300 - 12.5 x 20 12.5 x 25 16 x 25 16 x 31 18 x 35 - -
--16x20-----
4700 12.5 x 20 12.5 x 25 16 x 25 16 x 31 18 x 35 - - -
-16x20------
680016x2016x2516x3118x35----
10 00016x2516x3118x35-----
15 00016x3118x35------
22 00018x35-------
SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm)
CR
(µF)
UR (V)
6.3101625355063100
DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES
Nominal
CASE SIZE
Ø D x L
CASE
CODE Ø dØ Dmax. Lmax. FMASS
(g)
PACKAGING QUANTITIES
FORM
CA
FORM
CB
FORM
TFA
10 x 12 14 0.6 10.5 13.5 5.0 ± 0.5 1.6 1000 500 800
10 x 16 15 0.6 10.5 17.5 5.0 ± 0.5 1.9 500 500 800
10 x 20 16 0.6 10.5 22.0 5.0 ± 0.5 2.2 500 500 800
12.5 x 20 17 0.6 13.0 22.0 5.0 ± 0.5 4.0 500 500 500
12.5 x 25 18 0.6 13.0 27.0 5.0 ± 0.5 5.0 250 250 500
16 x 20 19a 0.8 16.5 22.0 7.5 ± 0.5 6.0 250 250 250
16 x 25 19 0.8 16.5 27.0 7.5 ± 0.5 8.0 250 250 250
16 x 31 20 0.8 16.5 33.5 7.5 ± 0.5 9.0 100 100 250
18 x 35 22 0.8 18.5 37.5 7.5 ± 0.5 14.5 100 100
Ø D
Ø d
-
+
F15
min.
5
min.
Fig.2 Form CA: Long leads
Ø D
Ø d
L
F
4 + 1
0
+-
Fig.3 Form CB: Cut leads
Fig.4 Form TFA: Taped in box (ammopack)
www.vishay.com For technical questions contact: aluminumcaps1@vishay.com Document Number: 28315
3Revision: 18-Apr-12
148 RUS
Vishay BCcomponents Aluminum Capacitors
Radial, Ultra High CV per Volume, Semi-Professional
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Unless otherwise specified, all electrical values in Table 2 apply at
Tamb =20°C, P = 86 kPa to 106 kPa, RH = 45 % to 75 %.
ORDERING EXAMPLE
Electrolytic capacitor 148 series
470 µF/25 V; ± 20 %
Nominal case size: Ø 10 mm x 12 mm; Form TFA
Ordering Code: MAL214836471E3
Former 12NC: 2222 148 36471
ELECTRICAL DATA
SYMBOL DESCRIPTION
CRrated capacitance at 100 Hz, tolerance ± 20 %
IRrated RMS ripple current at 100 Hz, 105 °C
IL2 max. leakage current after 2 min at UR
tan δmax. dissipation factor at 100 Hz
Zmax. impedance at 100 kHz
Table 2
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
100 Hz
105 °C
(mA)
IL2
2min
(µA)
tan δ
100 Hz
Z
100 kHz
20 °C
(Ω)
Z
100 kHz
- 40 °C
(Ω)
ORDERING CODE
MAL2148.......
BULK PACKAGING TAPED
FORM CA FORM CB FORM TFA
6.3
2200 10 x 16 720 139 0.30 0.170 1.90 53222E3 63222E3 33222E3
4700 12.5 x 20 1100 296 0.34 0.085 0.60 53472E3 63472E3 33472E3
6800 16 x 20 1210 428 0.38 0.060 0.30 53682E3 63682E3 33682E3
10000 16 x 25 1660 630 0.46 0.045 0.25 53103E3 63103E3 33103E3
15000 16 x 31 2050 945 0.56 0.033 0.15 53153E3 63153E3 33153E3
22000 18 x 35 2350 1386 0.66 0.032 0.15 53223E3 63223E3 -
10
1000 10 x 12 460 100 0.24 0.240 3.00 54102E3 64102E3 34102E3
1500 10 x 16 620 150 0.24 0.170 1.90 54152E3 64152E3 34152E3
2200 10 x 20 750 220 0.26 0.130 1.50 54222E3 64222E3 34222E3
3300 12.5 x 20 1010 330 0.28 0.085 0.60 54332E3 64332E3 34332E3
4700 12.5 x 25 1260 470 0.30 0.065 0.50 54472E3 64472E3 34472E3
4700 16 x 20 1260 470 0.30 0.060 0.30 94475E3 94476E3 94473E3
6800 16 x 25 1590 680 0.34 0.045 0.25 54682E3 64682E3 34682E3
10000 16 x 31 1910 1000 0.42 0.033 0.15 54103E3 64103E3 34103E3
15000 18 x 35 2200 1500 0.52 0.032 0.15 54153E3 64153E3 -
16
680 10 x 12 450 109 0.20 0.240 3.00 55681E3 65681E3 35681E3
1000 10 x 16 570 160 0.20 0.180 2.00 55102E3 65102E3 35102E3
1500 10 x 20 720 240 0.20 0.130 1.50 55152E3 65152E3 35152E3
2200 12.5 x 20 930 352 0.22 0.090 0.60 55222E3 65222E3 35222E3
3300 12.5 x 25 1180 528 0.24 0.065 0.50 55332E3 65332E3 35332E3
3300 16 x 20 1120 528 0.24 0.060 0.30 95335E3 95336E3 95333E3
4700 16 x 25 1480 752 0.26 0.045 0.25 55472E3 65472E3 35472E3
6800 16 x 31 1790 1088 0.30 0.035 0.20 55682E3 65682E3 35682E3
10000 18 x 35 2100 1600 0.36 0.032 0.20 55103E3 65103E3 -
25
470 10 x 12 410 118 0.16 0.260 3.20 56471E3 66471E3 36471E3
680 10 x 16 550 170 0.16 0.190 2.10 56681E3 66681E3 36681E3
1000 10 x 20 690 250 0.16 0.130 1.50 56102E3 66102E3 36102E3
1500 12.5 x 20 850 375 0.16 0.100 0.70 56152E3 66152E3 36152E3
2200 12.5 x 25 1110 550 0.18 0.070 0.50 56222E3 66222E3 36222E3
2200 16 x 20 1050 550 0.18 0.060 0.30 96225E3 96226E3 96223E3
3300 16 x 25 1420 825 0.20 0.045 0.25 56332E3 66332E3 36332E3
4700 16 x 31 1750 1175 0.22 0.035 0.20 56472E3 66472E3 36472E3
6800 18 x 35 2050 1700 0.26 0.033 0.20 56682E3 66682E3 -
Document Number: 28315 For technical questions contact: aluminumcaps1@vishay.com www.vishay.com
Revision: 18-Apr-12 4
148 RUS
Aluminum Capacitors
Radial, Ultra High CV per Volume, Semi-Professional
Vishay BCcomponents
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35
330 10 x 12 350 116 0.14 0.270 3.30 50331E3 60331E3 30331E3
470 10 x 16 480 165 0.14 0.190 2.10 50471E3 60471E3 30471E3
680 10 x 20 580 238 0.14 0.140 1.60 50681E3 60681E3 30681E3
1000 12.5 x 20 810 350 0.14 0.100 0.70 50102E3 60102E3 30102E3
1500 12.5 x 25 950 525 0.14 0.070 0.50 50152E3 60152E3 30152E3
1500 16 x 20 970 525 0.14 0.063 0.30 90155E3 90156E3 90153E3
2200 16 x 25 1270 770 0.16 0.045 0.25 50222E3 60222E3 30222E3
3300 16 x 31 1620 1155 0.18 0.037 0.20 50332E3 60332E3 30332E3
4700 18 x 35 1930 1645 0.20 0.033 0.20 50472E3 60472E3 -
50
220 10 x 12 330 110 0.12 0.280 3.40 51221E3 61221E3 31221E3
330 10 x 16 420 165 0.12 0.200 2.20 51331E3 61331E3 31331E3
470 10 x 20 530 235 0.12 0.140 1.60 51471E3 61471E3 31471E3
680 12.5 x 20 720 340 0.12 0.100 0.70 51681E3 61681E3 31681E3
1000 12.5 x 25 950 500 0.12 0.070 0.50 51102E3 61102E3 31102E3
1000 16 x 20 880 500 0.12 0.068 0.35 91105E3 91106E3 91103E3
1500 16 x 25 1180 750 0.12 0.047 0.30 51152E3 61152E3 31152E3
2200 16 x 31 1520 1100 0.14 0.039 0.20 51222E3 61222E3 31222E3
3300 18 x 35 1810 1650 0.16 0.035 0.20 51332E3 61332E3 -
63
100 10 x 12 230 63 0.10 0.320 3.90 58101E3 68101E3 38101E3
220 10 x 16 350 139 0.10 0.240 2.70 58221E3 68221E3 38221E3
330 12.5 x 20 540 208 0.10 0.130 0.90 58331E3 68331E3 38331E3
470 12.5 x 20 540 296 0.10 0.130 0.90 58471E3 68471E3 38471E3
680 12.5 x 25 760 428 0.10 0.085 0.65 58681E3 68681E3 38681E3
680 16 x 20 820 428 0.10 0.070 0.50 98685E3 98686E3 98683E3
1000 16 x 25 980 630 0.10 0.049 0.25 58102E3 68102E3 38102E3
1500 16 x 31 1390 945 0.10 0.042 0.20 58152E3 68152E3 38152E3
2200 18 x 35 1670 1386 0.12 0.038 0.20 58222E3 68222E3 -
100
47 10 x 12 165 47 0.08 0.640 19.20 59479E3 69479E3 39479E3
68 10 x 16 190 68 0.08 0.580 17.40 59689E3 69689E3 39689E3
100 10 x 20 260 100 0.08 0.380 11.40 59101E3 69101E3 39101E3
150 12.5 x 20 360 150 0.08 0.260 7.80 59151E3 69151E3 39151E3
220 12.5 x 25 440 220 0.08 0.170 5.10 59221E3 69221E3 39221E3
220 16 x 20 590 220 0.08 0.140 4.20 99225E3 99226E3 99223E3
330 16 x 25 630 330 0.08 0.120 3.60 59331E3 69331E3 39331E3
470 16 x 31 750 470 0.08 0.100 3.00 59471E3 69471E3 39471E3
ELECTRICAL DATA AND ORDERING INFORMATION
UR
(V)
CR
100 Hz
(µF)
NOMINAL
CASE SIZE
Ø D x L
(mm)
IR
100 Hz
105 °C
(mA)
IL2
2min
(µA)
tan δ
100 Hz
Z
100 kHz
20 °C
(Ω)
Z
100 kHz
- 40 °C
(Ω)
ORDERING CODE
MAL2148.......
BULK PACKAGING TAPED
FORM CA FORM CB FORM TFA
ADDITIONAL ELECTRICAL DATA
PARAMETER CONDITIONS VALUE
Voltage
Surge voltage Us1.15 UR
Reverse voltage Urev 1V
Current
Leakage current After 2 minutes at URIL2 0.01 CR x UR
After 5 minutes at URIL5 0.002 CR x UR
Inductance
Equivalent series inductance (ESL) Case D = 10 mm typ. 16 nH
Case D12.5 mm typ. 18 nH
Resistance
Equivalent series resistance (ESR) Calculated from tan δmax. and CR (see Table 2) ESR = tan δ/2 π f CR
www.vishay.com For technical questions contact: aluminumcaps1@vishay.com Document Number: 28315
5Revision: 18-Apr-12
148 RUS
Vishay BCcomponents Aluminum Capacitors
Radial, Ultra High CV per Volume, Semi-Professional
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
CAPACITANCE (C)
Tamb (°C)
C
C0
C0 = typical capacitance at 20 °C, 100 Hz
Fig.5 Typical multiplier of capacitance as a function of
ambient temperature
- 60 - 40 - 20 0 20 40 60 80 100 120
1.2
1.1
1.0
0.8
0.9
1
2
3
3
1
2
Curve 1: 10 V
Curve 2: 63 V
Curve 3: 100 V
T
amb
20 °C
C
0
= typical capacitance at 20 °C, 100 Hz
Fig.6 Typical multiplier of capacitance as
a function of frequency
1.2
1.0
0.0
0.6
0.2
0
0.4
10 10
2
10
3
10
4
10
5
2
1
3
C
C
0
Curve 1: 10 V
Curve 2: 50 V
Curve 3: 100 V
EQUIVALENT SERIES RESISTANCE (ESR)
T
amb
(°C)
ESR
0
= typical ESR at 20 °C, 100 Hz
- 60 - 40 - 20 0 20 40 60 80 100 120
100
10
0.1
1
1
1
2
2
Fig.7 Multiplier of ESR as a function of ambient temperature
Curve 1: 10 V
Curve 2: 63 V
ESR
ESR
0
Tamb = 20 °C
ESR0 = typical ESR at 20 °C, 100 Hz
Fig.8 Multiplier of ESR as a function of frequency
2.0
1.6
1.2
0.8
0
0.4
10 102 103 104 105
C
C0
3
2
1
3
2
1
Curve 1: 10 V
Curve 2: 50 V
Curve 3: 100 V
IMPEDANCE (Z)
T
amb
(°C)
Z
0
= typical impedance at 20 °C, 100 kHz
- 60 - 40 - 20 0 20 40 60 80 100 120
Fig.9 Multiplier of impedance as a function of ambient temperature
100
10
1
1
2
0
Curve 1: 100 V
Curve 2: < 63 V
Z
Z
0
Tamb = 20 °C
10 102 103 104 105
102
10
1
10-1
10-2
Curve 1: Ø 10 x 12 mm; 10 V
Curve 2: Ø 10 x 16 mm; 10 V
Curve 3: Ø 12.5 x 25 mm; 10 V
Curve 4: Ø 16 x 25 mm; 10 V
Curve 5: Ø 18 x 35 mm; 16 V
Fig.10 Typical impedance as a function of frequency
Tamb = 20 °C
10 102 103 104 105
102
10
1
10-1
10-2
Curve 1: Ø 10 x 12 mm; 10 V
Curve 2: Ø 10 x 16 mm; 10 V
Curve 3: Ø 12.5 x 25 mm; 10 V
Curve 4: Ø 16 x 25 mm; 10 V
Curve 5: Ø 18 x 35 mm; 16 V
Fig.10 Typical impedance as a function of frequency
Document Number: 28315 For technical questions contact: aluminumcaps1@vishay.com www.vishay.com
Revision: 18-Apr-12 6
148 RUS
Aluminum Capacitors
Radial, Ultra High CV per Volume, Semi-Professional
Vishay BCcomponents
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IMPEDANCE (Z)
RIPPLE CURRENT AND USEFUL LIFE
Tamb = 20 °C
10 102 103 104 105
102
10
1
10-1
10-2
Fig.11 Typical impedance as a function of frequency
Tamb = 20 °C
10 102 103 104 105
102
10
1
10-1
10-2
Curve 1: Ø 10 x 12 mm; 63 V
Curve 2: Ø 10 x 16 mm; 50 V
Curve 3: Ø 12.5 x 25 mm; 63 V
Curve 4: Ø 16 x 25 mm; 50 V
Curve 5: Ø 18 x 35 mm; 63 V
Z
(Ω)1
2
3
4
5
3.8
3.7
3.6
3.5
3.4
3.3
3.2
3.1
3.0
2.8
2.6
2.4
2.2
2.0
1.8
1.6
1.4
1.2
1.0
0.8
0.5
0.0
1.0
1.5
2.0
3.0
6.0
8.0
20
30
60
100
150
200
12
4.0
40 50 60 70 80 90 100 110
(1)
Tamb (°C)
Fig.12 Mulyiplier of useful life as a function of ambient ripple current load
lifetime multiplier
IA
IR
www.vishay.com For technical questions contact: aluminumcaps1@vishay.com Document Number: 28315
7Revision: 18-Apr-12
148 RUS
Vishay BCcomponents Aluminum Capacitors
Radial, Ultra High CV per Volume, Semi-Professional
This document is subject to change without notice.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY
FREQUENCY
(Hz)
IR MULTIPLIER
UR=6.3to25V U
R=35V U
R= 50 to 100 V
50 0.95 0.85 0.80
100 1.00 1.00 1.00
300 1.07 1.20 1.25
1000 1.12 1.30 1.40
3000 1.15 1.35 1.50
10 000 1.20 1.40 1.60
TEST PROCEDURES AND REQUIREMENTS
TEST PROCEDURE
(quick reference) REQUIREMENTS
NAME OF TEST REFERENCE
Endurance IEC 60384-4/
EN130300
subclause 4.13
Tamb = 105 °C; UR applied
case Ø D = 10 mm: 1000 h
case Ø D 12.5 mm: 2000 h
UR=6.3V; ΔC/C: + 15/- 30 %
UR10 V; ΔC/C: ± 20 %
tan δ≤2 x spec. limit
Z2 x spec. limit
IL5 spec. limit
Useful life CECC 30301
subclause 1.8.1
Tamb = 105 °C; UR and IR applied
case Ø D = 10 mm: 2000 h
case Ø D 12.5 mm: 3000 h
UR=6.3V; ΔC/C: + 45/- 50 %
UR10 V; ΔC/C: ± 45 %
tan δ≤3 x spec. limit
Z3 x spec. limit
IL5 spec. limit
no short or open circuit
total failure percentage: 1 %
Shelf life
(storage at high
temperature)
IEC 60384-4/
EN130300
subclause 4.17
Tamb = 105 °C; no voltage applied;
1000 h
after test: UR to be applied for 30 min,
24 h to 48 h before measurement
UR=6.3V; ΔC/C: + 15/- 30 %
UR10 V; ΔC/C: ± 20 %
tan δ≤2 x spec. limit
Z2 x spec. limit
IL5 2 x spec. limit
Surge IEC 60384-4/
EN130300
subclause 4.14
from source of 1.15 x UR:
RC = 0.1 ± 0.05 s; 1000 cycles of 30 s on,
330 s off, at 105 °C
ΔC/C: ± 20 %
tan δ≤1.5 x spec. limit
IL5 spec. limit
Reverse voltage IEC 60384-4/
EN130300
subclause 4.15
Tamb = 105 °C:
125 h at U = - 1 V, followed by 125 h at UR
ΔC/C: ± 15 %
tan δ≤1.5 x spec. limit
IL5 spec. limit
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.