SEMICONDUCTOR TECHNICAL DATA L SUFFIX CERAMIC CASE 620 The MC14017B is a five-stage Johnson decade counter with built-in code converter. High speed operation and spike-free outputs are obtained by use of a Johnson decade counter design. The ten decoded outputs are normally low, and go high only at their appropriate decimal time period. The output changes occur on the positive-going edge of the clock pulse. This part can be used in frequency division applications as well as decade counter or decimal decode display applications. * * * * * * Fully Static Operation DC Clock Input Circuit Allows Slow Rise Times Carry Out Output for Cascading Divide-by-N Counting Supply Voltage Range = 3.0 Vdc to 18 Vdc Capable of Driving Two Low-power TTL Loads or One Low-power Schottky TTL Load Over the Rated Temperature Range * Pin-for-Pin Replacement for CD4017B * Triple Diode Protection on All Inputs D SUFFIX SOIC CASE 751B IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIII IIII IIIIIIIIIII IIIIII III IIIIIIIIIIIIIIIIIIIII IIII IIIIIIIIIII IIIIII III IIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIII MAXIMUM RATINGS* (Voltages Referenced to VSS) Symbol Parameter VDD DC Supply Voltage Value Unit - 0.5 to + 18.0 V Vin, Vout Input or Output Voltage (DC or Transient) - 0.5 to VDD + 0.5 V lin, lout Input or Output Current (DC or Transient), per Pin 10 mA PD Power Dissipation, per Package 500 mW Tstg Storage Temperature - 65 to + 150 _C 260 _C TL Lead Temperature (8-Second Soldering) P SUFFIX PLASTIC CASE 648 * Maximum Ratings are those values beyond which damage to the device may occur. Temperature Derating: Plastic "P and D/DW" Packages: - 7.0 mW/_C From 65_C To 125_C Ceramic "L" Packages: - 12 mW/_C From 100_C To 125_C ORDERING INFORMATION MC14XXXBCP MC14XXXBCL MC14XXXBD Plastic Ceramic SOIC TA = - 55 to 125C for all packages. FUNCTIONAL TRUTH TABLE (Positive Logic) Clock Clock Enable 0 X X X 1 X 0 X X 1 Reset Decode Output=n 0 0 1 0 0 0 0 n n Q0 n+1 n n n+1 X = Don't Care. If n < 5 Carry = "1", Otherwise = "0". LOGIC DIAGRAM Q5 1 Q1 2 Q7 6 Q3 7 Q9 BLOCK DIAGRAM 11 CLOCK 14 14 CLOCK CLOCK ENABLE RESET 12 13 15 C C D R Q C Q R C D R Q C Q R C D R Q C Q R C D R Q C Q Q R C D R Q R CARRY CLOCK 13 ENABLE RESET 15 3 5 Q0 4 Q6 9 Q2 Cout 3 2 4 7 10 1 5 6 9 11 12 VDD = PIN 16 VSS = PIN 8 10 Q3 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q4 REV 3 1/94 MC14017B Motorola, Inc. 1995 74 MOTOROLA CMOS LOGIC DATA IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIII IIII III IIIIII IIIIIIII IIIIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIII IIIIIIII IIIIII IIIIIIIIII IIII III III IIII III IIII III IIII III III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIII IIIIIIII IIIIII IIIIIIIIIIIIIIIIIIII IIII III IIII III IIII III III IIIIII IIIIIIII IIIIII IIIIIIIIIIIIIIIIIIII IIIIIII IIIIIIIIIII IIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII ELECTRICAL CHARACTERISTICS (Voltages Referenced to VSS) Characteristic Output Voltage Vin = VDD or 0 Symbol - 55_C 25_C 125_C VDD Vdc Min Max Min Typ # Max Min Max Unit "0" Level VOL 5.0 10 15 -- -- -- 0.05 0.05 0.05 -- -- -- 0 0 0 0.05 0.05 0.05 -- -- -- 0.05 0.05 0.05 Vdc "1" Level VOH 5.0 10 15 4.95 9.95 14.95 -- -- -- 4.95 9.95 14.95 5.0 10 15 -- -- -- 4.95 9.95 14.95 -- -- -- Vdc 5.0 10 15 -- -- -- 1.5 3.0 4.0 -- -- -- 2.25 4.50 6.75 1.5 3.0 4.0 -- -- -- 1.5 3.0 4.0 5.0 10 15 3.5 7.0 11 -- -- -- 3.5 7.0 11 2.75 5.50 8.25 -- -- -- 3.5 7.0 11 -- -- -- 5.0 5.0 10 15 - 3.0 - 0.64 - 1.6 - 4.2 -- -- -- -- - 2.4 - 0.51 - 1.3 - 3.4 - 4.2 - 0.88 - 2.25 - 8.8 -- -- -- -- - 1.7 - 0.36 - 0.9 - 2.4 -- -- -- -- IOL 5.0 10 15 0.64 1.6 4.2 -- -- -- 0.51 1.3 3.4 0.88 2.25 8.8 -- -- -- 0.36 0.9 2.4 -- -- -- mAdc Input Current Iin 15 -- 0.1 -- 0.00001 0.1 -- 1.0 Adc Input Capacitance (Vin = 0) Cin -- -- -- -- 5.0 7.5 -- -- pF Quiescent Current (Per Package) IDD 5.0 10 15 -- -- -- 5.0 10 20 -- -- -- 0.005 0.010 0.015 5.0 10 20 -- -- -- 150 300 600 Adc IT 5.0 10 15 Vin = 0 or VDD Input Voltage "0" Level (VO = 4.5 or 0.5 Vdc) (VO = 9.0 or 1.0 Vdc) (VO = 13.5 or 1.5 Vdc) VIL "1" Level VIH (VO = 0.5 or 4.5 Vdc) (VO = 1.0 or 9.0 Vdc) (VO = 1.5 or 13.5 Vdc) Output Drive Current (VOH = 2.5 Vdc) (VOH = 4.6 Vdc) (VOH = 9.5 Vdc) (VOH = 13.5 Vdc) (VOL = 0.4 Vdc) (VOL = 0.5 Vdc) (VOL = 1.5 Vdc) Vdc Vdc IOH Source Sink Total Supply Current** (Dynamic plus Quiescent, Per Package) (CL = 50 pF on all outputs, all buffers switching) mAdc IT = (0.27 A/kHz) f + IDD IT = (0.55 A/kHz) f + IDD IT = (0.83 A/kHz) f + IDD Adc #Data labelled "Typ" is not to be used for design purposes but is intended as an indication of the IC's potential performance. ** The formulas given are for the typical characteristics only at 25_C. To calculate total supply current at loads other than 50 pF: IT(CL) = IT(50 pF) + (CL - 50) Vfk where: IT is in A (per package), CL in pF, V = (VDD - VSS) in volts, f in kHz is input frequency, and k = 0.0011. This device contains protection circuitry to guard against damage due to high static voltages or electric fields. However, precautions must be taken to avoid applications of any voltage higher than maximum rated voltages to this high-impedance circuit. For proper operation, Vin and Vout should be constrained to the range VSS (Vin or Vout) VDD. Unused inputs must always be tied to an appropriate logic voltage level (e.g., either VSS or VDD). Unused outputs must be left open. MOTOROLA CMOS LOGIC DATA PIN ASSIGNMENT Q5 1 16 VDD Q1 2 15 RESET Q0 3 14 CLOCK Q2 4 13 CE Q6 5 12 Cout Q7 6 11 Q9 Q3 7 10 Q4 VSS 8 9 Q8 MC14017B 75 IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIII IIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIII IIII IIIII IIII IIII IIII III IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIII IIII IIII III IIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIII IIII IIII III IIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII IIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIIII SWITCHING CHARACTERISTICS* (CL = 50 pF, TA = 25_C) Characteristic Symbol Output Rise and Fall Time tTLH, tTHL = (1.5 ns/pF) CL + 25 ns tTLH, tTHL = (0.75 ns/pF) CL + 12.5 ns tTLH, tTHL = (0.55 ns/pF) CL + 9.5 ns tTLH, tTHL Propagation Delay Time Reset to Decode Output tPLH, tPHL = (1.7 ns/pF) CL + 415 ns tPLH, tPHL = (0.66 ns/PF) CL + 197 ns tPLH, tPHL = (0.5 ns/pF) CL + 150 ns tPLH, tPHL Propagation Delay Time Clock to Cout tPLH, tPHL = (1.7 ns/pF) CL + 315 ns tPLH, tPHL = (0.66 ns/pF) CL + 142 ns tPLH, tPHL = (0.5 ns/pF) CL + 100 ns tPLH, tPHL Propagation Delay Time Clock to Decode Output tPLH, tPHL = (1.7 ns/pF) CL + 415 ns tPLH, tPHL = (0.66 ns/pF) CL + 197 ns tPLH, tPHL = (0.5 ns/pF) CL + 150 ns tPLH, tPHL Turn-Off Delay Time Reset to Cout tPLH = (1.7 ns/pF) CL + 315 ns tPLH = (0.66 ns/pF) CL + 142 ns tPLH = (0.5 ns/pF) CL + 100 ns tPLH Clock Pulse Width VDD Vdc Min Typ # Max 5.0 10 15 -- -- -- 100 50 40 200 100 80 Unit ns ns 5.0 10 15 -- -- -- 500 230 175 1000 460 350 ns 5.0 10 15 -- -- -- 400 175 125 800 350 250 ns 5.0 10 15 -- -- -- 500 230 175 1000 460 350 ns 5.0 10 15 -- -- -- 400 175 125 800 350 250 tw(H) 5.0 10 15 250 100 75 125 50 35 -- -- -- ns fcl 5.0 10 15 -- -- -- 5.0 12 16 2.0 5.0 6.7 MHz Reset Pulse Width tw(H) 5.0 10 15 500 250 190 250 125 95 -- -- -- ns Reset Removal Time trem 5.0 10 15 750 275 210 375 135 105 -- -- -- ns Clock Input Rise and Fall Time tTLH, tTHL 5.0 10 15 tsu 5.0 10 15 350 150 115 175 75 52 -- -- -- ns trem 5.0 10 15 420 200 140 260 100 70 -- -- -- ns Clock Frequency Clock Enable Setup Time Clock Enable Removal Time -- No Limit * The formulas given are for the typical characteristics only at 25_C. #Data labelled "Typ" is not to be used for design purposes but is intended as an indication of the IC's potential performance. MC14017B 76 MOTOROLA CMOS LOGIC DATA VDD VDD VSS A B Vout CLOCK Q0 ENABLE Q1 Q2 Q3 Q4 RESET Q5 Q6 Q7 Q8 Q9 CLOCK Cout VSS S1 S1 Output Sink Drive Output Source Drive Decode Outputs (S1 to A) Clock to desired outputs (S1 to B) Carry Clock to 5 thru 9 (S1 to B) S1 to A VGS = VDD - VDD VDS = Vout Vout - VDD ID EXTERNAL POWER SUPPLY VSS Figure 1. Typical Output Source and Output Sink Characteristics Test Circuit VDD 500 F 0.01 F CERAMIC ID Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 CLOCK ENABLE RESET PULSE GENERATOR fc CLOCK Cout VSS CL CL CL CL CL CL CL CL CL CL CL Figure 2. Typical Power Dissipation Test Circuit APPLICATIONS INFORMATION Figure 3 shows a technique for extending the number of decoded output states for the MC14017B. Decoded outputs are sequential within each stage and from stage to stage, with no dead time (except propagation delay). RESET CLOCK CE MC14017B RESET CLOCK CE MC14017B Q0 Q1 * * * Q8 Q9 Q0Q1 * * * Q8 Q9 9 DECODED OUTPUTS 8 DECODED OUTPUTS RESET CLOCK CE MC14017B Q1 * * * Q8 Q9 8 DECODED OUTPUTS CLOCK FIRST STAGE INTERMEDIATE STAGES LAST STAGE Figure 3. Counter Expansion MOTOROLA CMOS LOGIC DATA MC14017B 77 Pcp Ncp 90% CLOCK 50% CLOCK ENABLE trem RESET 20 ns Q0 Q2 Q3 Q4 tsu 20 ns 20 ns 20 ns 20 ns 20 ns tPLH tPLH tPHL 90% 10% tPHL tPLH 50% tTHL tTLH tPHL tPLH VOH V OL tTLH VOH VOL VOH VOL tTHL tTLH tPHL VOH VOL tPHL tPLH tTHL tTLH tTLH Q5 tPLH Q6 VDD VSS 50% tPLH 10% tTHL tPLH tPHL tTLH tPHL 90% VOH VOL tTHL tTHL Q8 tTHL tPHL VOH VOL VOH VOL tPLH tTLH tTHL tPLH tPHL Q9 Cout tPHL VOH VOL VOH VOL Q7 tTHL VDD VSS VDD VSS tPHL tPLH Q1 trem 10% tTLH tPLH tPHL tTHL tTLH tTHL VOH VOL VOH VOL Figure 4. AC Measurement Definition and Functional Waveforms MC14017B 78 MOTOROLA CMOS LOGIC DATA OUTLINE DIMENSIONS L SUFFIX CERAMIC DIP PACKAGE CASE 620-10 ISSUE V -A- 16 9 1 8 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEAD WHEN FORMED PARALLEL. 4. DIMENSION F MAY NARROW TO 0.76 (0.030) WHERE THE LEAD ENTERS THE CERAMIC BODY. -B- C L DIM A B C D E F G H K L M N -T- K N SEATING PLANE M E F J G D 16 PL 0.25 (0.010) 16 PL 0.25 (0.010) M T A T B M S INCHES MIN MAX 0.750 0.785 0.240 0.295 --- 0.200 0.015 0.020 0.050 BSC 0.055 0.065 0.100 BSC 0.008 0.015 0.125 0.170 0.300 BSC 0_ 15 _ 0.020 0.040 MILLIMETERS MIN MAX 19.05 19.93 6.10 7.49 --- 5.08 0.39 0.50 1.27 BSC 1.40 1.65 2.54 BSC 0.21 0.38 3.18 4.31 7.62 BSC 0_ 15 _ 0.51 1.01 S P SUFFIX PLASTIC DIP PACKAGE CASE 648-08 ISSUE R NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. -A- 16 9 1 8 B F C L S -T- SEATING PLANE K H G D J 16 PL 0.25 (0.010) MOTOROLA CMOS LOGIC DATA M T A M M DIM A B C D F G H J K L M S INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0_ 10 _ 0.020 0.040 MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0_ 10 _ 0.51 1.01 MC14017B 79 OUTLINE DIMENSIONS D SUFFIX PLASTIC SOIC PACKAGE CASE 751B-05 ISSUE J -A- 16 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. 9 -B- 1 P 8 PL 0.25 (0.010) 8 M B S G R K F X 45 _ C -T- SEATING PLANE M D 16 PL 0.25 (0.010) M T B S A S J DIM A B C D F G J K M P R MILLIMETERS MIN MAX 9.80 10.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.386 0.393 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.229 0.244 0.010 0.019 Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. How to reach us: USA/EUROPE/Locations Not Listed: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. 1-800-441-2447 or 602-303-5454 JAPAN: Nippon Motorola Ltd.; Tatsumi-SPD-JLDC, 6F Seibu-Butsuryu-Center, 3-14-2 Tatsumi Koto-Ku, Tokyo 135, Japan. 03-81-3521-8315 MFAX: RMFAX0@email.sps.mot.com - TOUCHTONE 602-244-6609 INTERNET: http://Design-NET.com ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 MC14017B 80 *MC14017B/D* MOTOROLA CMOS LOGIC DATA MC14017B/D