SPE-12-8-135/A/WY Page 1 of 3
SPECIFICATION
Part No.
:
EMPCB.MMCXFSTJ.A.HT
Product Name
:
MMCX (F) Jack For Edge PCB Mount
Feature
:
MMCX(F) Jack
Straight Edge Mount PCB Jack
Frequency Range: DC up to 6GHz
Finish: Gold
Leg Length: 2.9mm
Total Length: 7.4mm
RoHS Compliant
SPE-12-8-135/A/WY Page 2 of 3
1. Introduction
The EMPCB.MMCXFSTJ.A.HT connector was designed to be mounted on a PCB edge. The edge
mount configuration allows the connector to be easily slotted onto a PCB board; the maximum
thickness of PCB that the connector can be used with is 0.8mm. The connector pin is directly
soldered onto pads on the PCB. Taoglas connectors are all RoHS compliant.
2. Specification
ELECTRICAL
Impedance
50Ω
Frequency Range
DC~6 GHz
Working Voltage
Max. ≤170 Vrms
Dielectric withstanding Voltage
500 Vrms
Insulation Resistance
≥1000M ohms
MECHANICAL
Connector Dimension
7.4mm*4.5 mm
Max. Thickness PCB acceptable
0.8mm
Connector Pin Diameter
0.7mm
Connector Type
MMCX(F) to PCB Edge Mounted
ENVIRONMENTAL
RoHS compliant
SPE-12-8-135/A/WY Page 3 of 3
3. Connector Drawing
Name
Material
Finish
QTY
1
Body
Brass
Gold
1
2
Insulator
Teflon
White
1
3
Female Contact
Phosphor Bronze
Gold
1
Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to
make changes to specifications and product descriptions at any time without notice.
Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties
without express permission is strictly prohibited. Copyright © 2012, Taoglas Ltd.
