CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVEK –55 °C to +105 °C
Very Long Life - 5000 Hours - SMT Aluminum Electrolytic Capacitors
Complies with the EU Directive
2002/95/EC requirement restricting
the use of Lead (Pb), Mercury (Hg),
Cadmium (Cd), Hexavalent chromium
(Cr(VI)), PolyBrominated Biphenyls
(PBB) and PolyBrominated Diphenyl
Ethers (PBDE).
Specications
–55 °C to +105 °C
6.3, 10, 16, 25, 35, 50 Vdc
0.1µF to 470 µF
±20% @ 120 Hz and +20 °C
I = 0.01 CV or 3 (µA) whichever is greater after 2 minutes
C = rated capacitance in µF, V = rated DC working voltage
For Filtering, Bypassing and Power Supply Decoupling
Highlights
• +105 °C, Up to 5000 Hours Load Life
• Capacitance Range: 0.1 µF to 470 µF
• Voltage Range: 6.3 Vdc to 50 Vdc
Operating Temperature:
Rated Voltage:
Capacitance:
Capacitance Tolerance:
Leakage Current:
Ripple Current Multiplier:
Dissipation Factor:
(Tan d at 120 Hz, 20 ºC)
Low Temperature
Characteristic (at 120 Hz):
Shelf LifeTest:
Type AVEK Capacitors are rated for 5000 hours at 105 ºC with low
impedance characteristics. They are ideal for high density PC board
packaging. The Type AVEK oers a low in-place-cost for a high
quality performer. The vertical cylindrical cases facilitate automatic
mounting and reow soldering into the same footprint of like-rated
tantalum capacitors except without the need for voltage derating.
Type AVEK is RoHS compliant.
Load Life Test:
Test time: 1000 hours; test limits are the same as those for life test.
Freq. (Hz)
Vdc 50, 60 120 1 k 10 k up
Under 16 0.8 1 1.15 1.25
25 ~ 35 0.8 1 1.25 1.4
50 ~ 63 0.8 1 1.35 1.5
100 0.7 1 1.35 1.5
Rated Voltage 6.3 10 16 25 35 50
4 ~ 6.3 Ø 0.32 0.28 0.24 0.18 0.15 0.14
8 ~ 10 Ø 0.30 0.26 0.22 0.16 0.13 0.12
Rated Voltage 6.3 10 16 25 35 50
Impedance
Ratio
Z(–25 ºC) / Z(+20 ºC) 4 3 2 2 2 2
Z(–40 ºC) / Z(+20 ºC) 8 5 4 3 3 3
Test Time 2,000 Hours ( 4 ~ 6.3 Ø ) 5,000 Hrs ( 8 ~ 10 Ø )
Capacitance
Change
6.3 V Within ±30% of initial value Within ±30% of initial value
10 ~ 16 V Within ±25% of initial value Within ±30% of initial value
25 ~ 50 V Within ±20% of initial value Within ±30% of initial value
Dissipation
Factor
6.3 ~ 16 V < 300% of specied value < 300% of specied value
25 ~ 50 V < 200% of specied value < 300% of specied value
Leakage Current Within specied value Within specied value
Type AVEK –55 °C to +105 °C
Very Long Life - 5000 Hours - SMT Aluminum Electrolytic Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Ratings
Outline Drawing, Case Code & Dimensions Table
Case Ø D L A B C W P ±0.2
Code (mm) (mm) (mm) (mm) (mm) (mm) (mm)
B 4.0 5.7 ±0.3 4.3 4.3 2.0 0.5 to 0.8 1.0
C 5.0 5.7 ±0.3 5.3 5.3 2.3 0.5 to 0.8 1.5
D 6.3 5.7 ±0.3 6.3 6.3 2.7 0.5 to 0.8 2.0
F 8.0 10 ±0.5 8.4 8.4 3.0 0.7 to 1.1 3.1
G 10.0 10 ±0.5 10.4 10.4 3.3 0.7 to 1.1 4.7
AVEK 106 M 25 C 12T –F
Type Capacitance Capacitance Voltage Code Case Packaging Code RoHS
Tolerance Code Compliant
AVEK 104 = .1 µF M = ±20% 06 = 6.3 Vdc 25 = 25 Vdc 12 = Carrier Tape
475 = 4.7 µF 10 = 10 Vdc 35 = 35 Vdc Width (mm)
106 = 10.0 µF 16 = 16 Vdc 50 = 50 Vdc T = Tape & Reel
227 = 220 µF
Part Numbering System
Max Max Max Max
Catalog DCL DF ESR Ripple Current Case Size Quantity
Cap Part Number 2 min. 120 Hz 20 ºC 120 Hz 20 ºC 120 Hz 105 °C Code D x L per Reel
(µF) (µA) (ohms) (mA) (mm) (each)
6.3 Vdc ( 8 Vdc Surge)
22 AVEK226M06B12T-F 3.0 0.32 24.1 13 B 4 x 5.7 2000
33 AVEK336M06C12T-F 3.0 0.32 16.1 30 C 5 x 5.7 1000
47 AVEK476M06C12T-F 3.0 0.32 11.3 36 C 5 x 5.7 1000
100 AVEK107M06D16T-F 6.3 0.32 5.3 61 D 6.3 x 5.7 1000
220 AVEK227M06F24T-F 13.9 0.30 2.3 178 F 8 x 10 500
330 AVEK337M06F24T-F 20.8 0.30 1.5 178 F 8 x 10 500
470 AVEK477M06G24T-F 29.6 0.30 1.1 324 G 10 x 10 500
10 Vdc ( 13 Vdc Surge)
10 AVEK106M10B12T-F 3.0 0.28 46.4 13 B 4 x 5.7 2000
22 AVEK226M10C12T-F 3.0 0.28 21.1 30 C 5 x 5.7 1000
33 AVEK336M10C12T-F 3.3 0.28 14.1 30 C 5 x 5.7 1000
47 AVEK476M10D16T-F 4.7 0.28 9.9 43 D 6.3 x 5.7 1000
100 AVEK107M10F24T-F 10.0 0.26 4.3 178 F 8 x 10 500
220 AVEK227M10F24T-F 22.0 0.26 2.0 178 F 8 x 10 500
330 AVEK337M10G24T-F 33.0 0.26 1.3 324 G 10 x 10 500
470 AVEK477M10G24T-F 47.0 0.26 0.9 324 G 10 x 10 500
ØD ±.05
.
03 Max
B ± 0.2
.04 ±0.2
C ±0.2
W
P
A ± 0.2
L
C ±0.2
+
-
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVEK –55 °C to +105 °C
Very Long Life - 5000 Hours - SMT Aluminum Electrolytic Capacitors
Max Max Max Max
Catalog DCL DF ESR Ripple Current Case Size Quantity
Cap Part Number 2 min. 120 Hz 20 ºC 120 Hz 20 ºC 120 Hz 105 °C Code D x L per Reel
(µF) (µA) ( ohms ) (mA) (mm) (each)
16 Vdc ( 20 Vdc Surge)
4.7 AVEK475M16B12T-F 3.0 0.24 84.7 13 B 4 x 5.7 2000
10 AVEK106M16B12T-F 3.0 0.24 39.8 16 B 4 x 5.7 2000
22 AVEK226M16C12T-F 3.5 0.24 18.1 30 C 5 x 5.7 1000
33 AVEK336M16D16T-F 5.3 0.24 12.1 40 D 6.3 x 5.7 1000
47 AVEK476M16D16T-F 7.5 0.24 8.5 50 D 6.3 x 5.7 1000
100 AVEK107M16F24T-F 16.0 0.22 3.6 178 F 8 x 10 500
220 AVEK227M16F24T-F 35.2 0.22 1.7 178 F 8 x 10 500
330 AVEK337M16G24T-F 52.8 0.22 1.1 324 G 10 x 10 500
470 AVEK477M16G24T-F 75.2 0.22 0.8 324 G 10 x 10 500
25 Vdc (31 Vdc Surge)
4.7 AVEK475M25B12T-F 3.0 0.18 63.5 13 B 4 x 5.7 2000
10 AVEK106M25C12T-F 3.0 0.18 29.8 23 C 5 x 5.7 1000
22 AVEK226M25D16T-F 5.5 0.18 13.6 38 D 6.3 x 5.7 1000
33 AVEK336M25D16T-F 8.3 0.18 9.0 48 D 6.3 x 5.7 1000
47 AVEK476M25F24T-F 11.8 0.16 5.6 178 F 8 x 10 500
100 AVEK107M25F24T-F 25.0 0.16 2.7 178 F 8 x 10 500
220 AVEK227M25F24T-F 55.0 0.16 1.2 240 F 8 x 10 500
330 AVEK337M25G24T-F 82.5 0.16 0.8 324 G 10 x 10 500
35 Vdc (44 Vdc Surge)
4.7 AVEK475M35B12T-F 3.0 0.15 52.9 13 B 4 x 5.7 2000
10 AVEK106M35C12T-F 3.5 0.15 24.9 25 C 5 x 5.7 1000
22 AVEK226M35D16T-F 7.7 0.15 11.3 50 D 6.3 x 5.7 1000
33 AVEK336M35F24T-F 11.6 0.13 6.5 178 F 8 x 10 500
47 AVEK476M35F24T-F 16.5 0.13 4.6 178 F 8 x 10 500
100 AVEK107M35G24T-F 35.0 0.13 2.2 324 G 10 x 10 500
220 AVEK227M35G24T-F 77.0 0.13 1.0 324 G 10 x 10 500
50 Vdc (63 Vdc Surge)
.10 AVEK104M50B12T-F 3.0 0.14 2321.0 2 B 4 x 5.7 2000
.22 AVEK224M50B12T-F 3.0 0.14 1055.0 3 B 4 x 5.7 2000
.33 AVEK334M50B12T-F 3.0 0.14 703.3 4 B 4 x 5.7 2000
.47 AVEK474M50B12T-F 3.0 0.14 493.8 5 B 4 x 5.7 2000
1.0 AVEK105M50B12T-F 3.0 0.14 232.1 10 B 4 x 5.7 2000
2.2 AVEK225M50B12T-F 3.0 0.14 105.5 16 B 4 x 5.7 2000
3.3 AVEK335M50B12T-F 3.0 0.14 70.3 18 B 4 x 5.7 2000
4.7 AVEK475M50C12T-F 3.0 0.14 49.4 22 C 5 x 5.7 1000
10.0 AVEK106M50D16T-F 5.0 0.14 23.2 30 D 6.3 x 5.7 1000
22.0 AVEK226M50F24T-F 11.0 0.12 9.0 178 F 8 x 10 500
33.0 AVEK336M50F24T-F 16.5 0.12 6.0 178 F 8 x 10 500
47.0 AVEK476M50F24T-F 23.5 0.12 4.2 178 F 8 x 10 500
100.0 AVEK107M50G24T-F 50.0 0.12 2.0 160 G 10 x 10 500
Type AVEK –55 °C to +105 °C
Very Long Life - 5000 Hours - SMT Aluminum Electrolytic Capacitors
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Recommended Land Patterns by case size for AVEK series
C
BB
A
Recommended Soldering Methods
Recommended Reow Soldering Prole:
Soldering with a solder iron should be performed with a maximum soldering iron tip tem-
perature of 350±5°C for 3 to 4 seconds.
Case sizes 4 thur 6.3 mm dia. should be subjected to just one reow soldering process.
The 8 and 10 mm dia. case sizes should be subjected to a maximum of two reow soldering processes.
For case diameters
4 thru 6.3 mm
For case diameters
8 and 10 mm
CDE Cornell Dubilier • 1605 E. Rodney French Blvd. • New Bedford, MA 02744 • Phone: (508)996-8564 • Fax: (508)996-3830 • www.cde.com
Type AVEK –55 °C to +105 °C
Very Long Life - 5000 Hours - SMT Aluminum Electrolytic Capacitors
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and data
(collectively, the “Information”) in this datasheet or other publication are subject to change. The customer
is responsible for checking, conrming and verifying the extent to which the Information contained in this
datasheet or other publication is applicable to an order at the time the order is placed. All Information given
herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation
or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based
on the knowledge that the Cornell Dubilier company providing such statements (“Cornell Dubilier”) has
of operating conditions that such Cornell Dubilier company regards as typical for such applications, but
are not intended to constitute any guarantee, warranty or representation regarding any such matter – and
Cornell Dubilier specically and expressly disclaims any guarantee, warranty or representation concerning
the suitability for a specic customer application, use, storage, transportation, or operating environment.
The Information is intended for use only by customers who have the requisite experience and capability to
determine the correct products for their application. Any technical advice inferred from this Information or
otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given
gratis (unless otherwise specied by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability
for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality
and safety standards regarding the design and manufacturing of its products, in light of the current state
of the art, isolated component failures may still occur. Accordingly, customer applications which require a
high degree of reliability or safety should employ suitable designs or other safeguards (such as installation
of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the
failure of an electrical component does not result in a risk of personal injury or property damage. Although
all product-related warnings, cautions and notes must be observed, the customer should not assume that all
safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be
required.