Product catalogue | Sensor-Actuator-Interface (SAI) | SAI - passive | M12 metal distributor for large cross-sections | Hood
version with M25 outlet | SAI-4/6/8-MHD 5P
- 1 -
General ordering data
Order No. 1701233000
Part designation SAI-4-MHD-5P M12
Version Sensor-actuator passive distributor, M12, Hood
version with M25 outlet, LED: Yes
EAN 4032248184507
Qty. 1 pc(s).
Dimensions
Length 102 mm
Height 55 mm
Width 60 mm
Technical data
Ambient temperature, max. 90 °C
Ambient temperature, min. -20 °C
Behaviour in fire V-0
Bus system without
Cable gland M 20
Clamping range, max. 1.5 mm²
Clamping range, min. 0.08 mm²
Conductor O.D., max. 14 mm
Conductor O.D., min. 10 mm
Connection type PE Screw connection
Contact carrier material PBT UL 94 V0
Contact material CuZn, pre-nickeled, gold-plated
Contact surface tinned
Contact tube O-ring material Viton
Contact tube diameter M12
Current per signal 2 A
Electrical isolation available Yes
Hood sealing material encased in PUR foam
Housing colour silver
Housing material CuZn, nickel-plated
Insulation resistance 1 MΩ
LED colour for I/O function yellow
LED colour for indicating operation green
LED initiator Yes
Number of contact sockets 4
Ordering data, title SAI-4/6/8-MHD
Plugging cycles < = 50
Pollution severity 3
Protection class IP 68
Rated voltage 32 V DC
Test voltage 1 kVeff
Threaded sockets CuZn, nickel-plated
Total current 10 A
Wiring diagram
max. current-carrying capacity per slot 3 A
max. voltage 30 V DC
min. voltage 10 V
No. of poles 5
Product catalogue | Sensor-Actuator-Interface (SAI) | SAI - passive | M12 metal distributor for large cross-sections | Hood
version with M25 outlet | SAI-4/6/8-MHD 5P
- 2 -
Technical data
Version complete module
Approvals
Approvals institutes
Classifications
ETIM 2.0 NK
ETIM 3.0 EC001856
eClass 4.1 NK
eClass 5.0 NK
eClass 5.1 NK
Similar products
Order No. Part designation Version
1701243000 SAI-6-MHD-5P M12 Sensor-actuator passive distributor, M12, Hood version with M25
outlet, LED: Yes
1701253000 SAI-8-MHD-5P M12 Sensor-actuator passive distributor, M12, Hood version with M25
outlet, LED: Yes
