15
HOW TO ORDER BY MILITARY PART NUMBER
MIL-C-83723 SERIES III THREADED COUPLING AND
QUICK-DISCONNECT COUPLING CONNECTORS
M83723 /84 R 08 03 N
1 23456
1. Connector Type
M83723 designates MIL-C-83723 Series III Connectors
2. Connector Style
(Refer to military specification slashsheet number.)
THREADED COUPLING CONNECTORS
are designated by the following numbers:
/82 wall mounting receptacle with socket contacts
/83 wall mounting receptacle with pin contacts
/84 jam nut receptacle with socket contacts
/85 jam nut receptacle with pin contacts
/86 standard straight plug with socket contacts
/87 standard straight plug with pin contacts
/91 straight plug with RFI grounding, socket contacts
/92 straight plug with RFI grounding, pin contacts
/95 straight plug with self-locking clutch plate,
socket contacts
/96 straight plug with self-locking clutch plate,
pin contacts
QUICK-DISCONNECT COUPLING CONNECTORS
are designated by the following numbers:
/66 straight plug without lanyard, pin contacts
/67 straight plug without lanyard, socket contacts
/68 straight plug with lanyard, pin contacts
/69 straight plug with lanyard, socket contacts
3. Service Class
For threaded and quick-disconnect coupling connectors:
A aluminum shell, black non-conductive anodize finish,
fluid resistant
R aluminum shell, electroless nickel finish, fluid resistant
G stainless steel shell, passivated, fluid resistant
W aluminum shell, cadmium olive drab finish,
corrosion/fluid resistant
Consult Amphenol, Sidney, NY for the following additional
classes of MIL-C-83723, Series III which are available in the
Amphenol/Pyle versions.:
Classes K, S, N - firewall, high temperature (200°C - 260°C)
Classes H and Y - hermetics
4., 5. Shell size and insert arrangement - See chart on page 16
and pattern drawings that follow.
Shell sizes 8 thru 28 are available in threaded coupling con-
nectors. (However, note that size 28 shell is not an MS con-
nector, and should be ordered by proprietary number.)
Shell sizes 8 thru 24 are available in quick-disconnect cou-
pling connectors.
6. Keying Positions (rotation of master key/keyway of shell)
Use N for normal.
Use 6, 7, 8, 9, or Y for alternate keying positions.
See page 17 for descriptions.
Clocking Positions (rotation of insert)
Use 1, 2, 3, 4 or 5 for alternate clocking positions.
See page 17 for descriptions.
Miniature Cylindrical MIL-C-83723, Series III
Threaded and Quick-Disconnect Coupling
how to order
HOW TO ORDER BY PROPRIETARY PART NUMBER
MIL-C-83723 SERIES III THREADED COUPLING AND
QUICK-DISCONNECT COUPLING CONNECTORS
MT 34 R08 03 P 7 –***
12345678
1. Connector Type
MT designates Amphenol®/Matrix® Threaded Coupling
Connectors
MQ designates Amphenol®/Matrix® Quick-Disconnect
Coupling Connectors
2. Connector Style
THREADED COUPLING CONNECTORS
are designated by the following numbers:
30 wall mounting receptacle
34 jam nut receptacle
36 standard straight plug
38 straight plug with RFI grounding fingers
37 straight plug with self-locking clutch plate
QUICK-DISCONNECT COUPLING CONNECTORS
are designated by the following numbers:
35 straight plug with lanyard
36 straight plug without lanyard
3. Service Class
For threaded and quick-disconnect coupling connectors:
A aluminum shell, black non-conductive anodize finish,
fluid resistant
R aluminum shell, electroless nickel finish, fluid resistant
G stainless steel shell, passivated, fluid resistant
W aluminum shell, cadmium olive drab finish,
corrosion/fluid resistant
Consult Amphenol, Sidney, NY for the following additional
classes of MIL-C-83723, Series III which are available in the
Amphenol/Pyle versions.:
Classes K, S, N - firewall, high temperature (200°C - 260°C)
Classes H and Y - hermetics
4., 5. Shell size and insert arrangement - See chart on page 16
and pattern drawings that follow.
Shell sizes 8 thru 28 are available in threaded coupling con-
nectors. Shell sizes 8 thru 24 are available in quick-discon-
nect coupling connectors.
6. Contact Types
P designates pin
S designates socket
7. Keying Positions (rotation of master key/keyway of shell)
Use 6, 7, 8, 9, or Y for alternate keying positions.
See page 17 for descriptions.
Clocking Positions (rotation of insert)
Use 1, 2, 3, 4 or 5 for alternate clocking positions.
See page 17 for descriptions.
8. Modification Number
Consult Amphenol, Sidney, NY for information.
For ordering information on accessories,
such as protection caps and backshell hard-
ware, contact Amphenol, Sidney, NY.