Datasheet
DC-operated LED indicators
For the latest technical information about this product, including specifications, dimensions, and wiring, see
www.bannerengineering.com.
Models Inputs
T8LGYX7PQP PNP
T8LGYX7NQP NPN
• Polycarbonate/ABS alloy housing,
thermoplastic diffuser
• IP67
M18GYX7PQ PNP
M18GYX7NQ NPN
• Nickel-plated brass housing,
thermoplastic diffuser
• Fully encapsulated IP67
T18GYX7PQ PNP
T18GYX7NQ NPN
• Thermoplastic polyester housing,
thermoplastic diffuser
• Fully encapsulated IP67
T30GYX7PQ PNP
T30GYX7NQ NPN
• Thermoplastic polyester housing,
thermoplastic diffuser
• Fully encapsulated IP67
Models Inputs
K30LGYX7PQ PNP
K30LGYX7NQ NPN
• 22 mm threaded polycarbonate
base, translucent polycarbonate
dome
• Fully encapsulated IP67, IP69K
K50LGYX7PQ PNP
K50LGYX7NQ NPN
• 30 mm threaded polycarbonate
base, translucent polycarbonate
dome
• Fully encapsulated IP67, IP69K
K50FLGYX7PQ PNP
K50FLGYX7NQ NPN
• Polycarbonate base, translucent
polycarbonate dome
• Fully encapsulated IP67, IP69K
K80LGYX7PQ PNP
K80LGYX7NQ NPN
• ABS and polycarbonate base,
translucent polycarbonate dome
• Electronics fully encapsulated IP67
* A QD model requires a mating cable; see Cordsets on page 3.
T8L Models: Standard pigtail QD models are listed. To order the integral 4-wire cable model, omit suffix QP (for example,
T8LGYX7P).
K80L Models: Standard 4-pin Euro integral QD connector models are listed. To order the terminal-wired model, omit
suffix Q (for example, K80LGYX7P).
Other Models: Standard 4-pin Euro integral QD connector models are listed. To order the 2 m (6.5 ft) integral 4-wire
cable model, omit suffix Q (example, M18GYX7P). To order the 150 mm (5.9 in) PVC pigtail with 4-pin Euro connector,
replace suffix Q with QP (for example, M18GYX7PQP).
Contact the factory for other colors/color combinations, including: blue, white, and orange.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
EZ-LIGHT™ 2-Color Indicators for Use with
Sensors
Original Document
121900 Rev. H 17 September 2014