STPS50U100C ULVFTM power Schottky rectifier Features A1 ultralow forward voltage drop high current capability high frequency operation K A2 Description A2 A1 K A2 A1 The STPS50U100C is a dual power Schottky diode rectifier, suited for high frequency switch mode power supplies. Featuring an ultralow forward voltage (ULVF) drop, this device, packaged in TO-220AB and I2PAK, is intended to be used in notebook, game station and desktop adaptors as well as server SMPS. It has been especially designed to help power supply manufacturers meet the recently introduced worldwide efficiency standards. K TO-220AB STPS50U100CT Table 1. I2PAK STPS50U100CR Device summary Symbol Value IF(AV) 2 x 25 A VRRM 100 V VF(typ) (25 A @ 125 C) 0.64 V Tj (max) 150 C TM: ULVF is a trademark of STMicroelectronics November 2010 Doc ID 16603 Rev 2 1/8 www.st.com 8 Characteristics STPS50U100C 1 Characteristics Table 2. Absolute ratings (limiting values per diode at 25 C, unless otherwise specified) Symbol Parameter Value Unit VRRM Repetitive peak reverse voltage 100 V IF(RMS) Forward rms current 50 A IF(AV) Average forward current, = 0.5 TC = 120 C Per diode TC = 105 C Per device 25 50 A IFSM Surge non repetitive forward current tp = 10 ms, half sine-wave 250 A Tstg Storage temperature range -65 to + 150 C 150 C Value Unit 1.3 0.9 C/W 0.45 C/W Tj Maximum operating junction temperature(1) 1 dPtot < condition to avoid thermal runaway for a diode on its own heatsink Rth(j-a) dTj 1. Table 3. Thermal resistance Symbol Parameter Rth (j-c) Junction to case Rth (c) Coupling Per diode Per device When the diodes 1 and 2 are used simultaneously: Tj(diode 1) = P(diode1) x Rth(j-c)(Per diode) + P(diode2) x Rth(c) Table 4. Symbol Static electrical characteristics Parameter Tests conditions Tj = 25 C IR Reverse leakage current Tj = 125 C Tj = 25 C Tj = 125 C Tj = 25 C Tj = 125 C VF Forward voltage drop Tj = 25 C Tj = 125 C Tj = 25 C Tj = 125 C VR = 70 V VR = VRRM IF = 5 A IF = 15 A IF = 25 A Min. Typ. Max. Unit - 15 - A - 10 - mA - 30 200 A - 15 40 mA - 0.48 - - 0.38 - - 0.58 - - 0.54 - - 0.67 0.73 - 0.64 0.7 V To evaluate the conduction losses use the following equation: P = 0.475 x IF(AV) + 0.009 IF2(RMS) 2/8 Doc ID 16603 Rev 2 STPS50U100C Figure 1. 28 Characteristics Average forward power dissipation Figure 2. versus average forward current (per diode) PF(AV)(W) IM(A) 250 = 0.05 24 = 0.1 = 0.2 = 0.5 Non repetitive surge peak forward current versus overload duration (maximum values, per diode) 225 =1 200 20 175 150 16 Tc = 25 C 125 12 Tc = 75 C 100 75 8 50 T 4 25 = tp / T 0 0 5 10 Figure 3. 1.E+02 15 tp 20 25 t = 0.5 IF(AV)(A) 0 30 1.E-03 35 Reverse leakage current versus reverse voltage applied (typical values, per diode) IR(mA) Tc = 125 C IM t(s) 1.E-02 Figure 4. 1.E-01 Average forward current versus ambient temperature ( = 0.5, per diode) IF(AV)(A) 30 Tj = 150 C Rth(j-a) = Rth(j-c) 25 Tj = 125 C 1.E+01 Tj = 100 C 20 Tj = 75 C 15 1.E+00 1.E+00 1.E-01 Tj = 50 C 1.E-02 Tj = 25 C 10 = tp / T VR(V) 1.E-03 tp 0 0 10 Figure 5. 1.0 T 5 20 30 40 50 60 70 80 90 100 0 25 Relative variation of thermal Figure 6. impedance junction to case versus pulse duration Zth(j-c)/Rth(j-c) 10000 Tamb(C) 50 75 100 125 150 Junction capacitance versus reverse voltage applied (typical values, per diode) C(pF) F = 1 MHz Vosc = 30 mVRMS Tj = 25 C 0.9 0.8 0.7 0.6 0.5 1000 0.4 0.3 0.2 Single pulse 0.1 0.0 1.E-04 tp(s) 1.E-03 1.E-02 1.E-01 1.E+00 100 VR(V) 1 Doc ID 16603 Rev 2 10 100 3/8 Application information Figure 7. STPS50U100C Forward voltage drop versus forward current (per diode) 50 IFM(A) 45 40 35 Tj = 125 C (Maximum value) 30 25 20 Tj = 125 C (Typical value) 15 Tj = 25 C (Maximum value) 10 5 VFM(V) 0 0.0 2 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 Application information It is mandatory to ensure a peak reverse voltage below the VRRM absolute rating. ST recommends the use of an RC clamping snubber circuit in parallel with the STPS50U100C device. Figure 8. Application schematic R C DC/DC input DC/DC output STPS50U100C 4/8 Doc ID 16603 Rev 2 STPS50U100C 3 Package information Package information Epoxy meets UL94,V0 Cooling method: by conduction (C) Recommended torque value: 0.4 to 0.6 N*m In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 5. TO-220AB dimensions Dimensions Ref. Dia Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 F2 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 G1 2.40 2.70 0.094 0.106 H2 10 10.40 0.393 0.409 C L5 L7 L6 L2 F2 D L9 L4 L2 F M G1 Inches A H2 F1 Millimeters 16.4 typ. 0.645 typ. L4 13 14 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 E G M Dia. Doc ID 16603 Rev 2 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 5/8 Package information STPS50U100C Mounting (soldering) the I2PAK metal slug (heatsink) with alloy, like a surface mount device, IS NOT PERMITTED. A standard through-hole mounting is mandatory. I2PAK dimensions Table 6. Dimensions Ref. A E c2 L2 D L1 A1 b1 L b c e e1 6/8 Doc ID 16603 Rev 2 Millimeters Inches Min. Max. Min. Max. A 4.40 4.60 0.173 0.181 A1 2.40 2.72 0.094 0.107 b 0.61 0.88 0.024 0.035 b1 1.14 1.70 0.044 0.067 c 0.49 0.70 0.019 0.028 c2 1.23 1.32 0.048 0.052 D 8.95 9.35 0.352 0.368 e 2.40 2.70 0.094 0.106 e1 4.95 5.15 0.195 0.203 E 10 10.40 0.394 0.409 L 13 14 0.512 0.551 L1 3.50 3.93 0.138 0.155 L2 1.27 1.40 0.050 0.055 STPS50U100C 4 Ordering information Ordering information Table 7. Ordering information Order code Marking Package Weight Base qty Delivery mode STPS50U100CT STPS50U100C TO-220AB 2.23 g 50 Tube 1.49 g 50 Tube STPS50U100CR STPS50U100C 2 I PAK For the latest information on available order codes see the product pages on www.st.com. 5 Revision history Table 8. Document revision history Date Revision Changes 17-Nov-2009 1 First release. 04-Nov-2010 2 Added trademark statement for UVLF. Doc ID 16603 Rev 2 7/8 STPS50U100C Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2010 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 16603 Rev 2