Original Creation Date: 10/30/95
Last Update Date: 05/07/04
Last Major Revision Date: 08/21/96
MN100325-X REV 1B0 MICROCIRCUIT DATA SHEET
HEX ECL-to-TTL TRANSLATOR
General Description
The 100325 is a hex translator for converting F100K logic level to TTL logic levels.
Differential inputs allow each circuit to be used as an inverting, non-inverting or
differential receiver. An internal reference voltage generator provides VBB for
single-ended operation or for use in Schmitt trigger applications. All inputs have 50K
ohms pull-down resistors; therefore, the outputs will go LOW when the inputs are left
unconnected. When used in the differential mode, the inputs have a common mode rejection
of +1V, making this device tolerant of ground offsets and translents between the signal
source and the translator. The VEE and VTTL power may be applied in either order.
NS Part Numbers
100325DMQB
100325FMQB
100325J-QMLV
100325W-QMLV
100325WFQMLV
Industry Part Number
100325
Prime Die
F325
Controlling Document
SEE FEATURES SECTION
Processing
MIL-STD-883, Method 5004
Quality Conformance Inspection
MIL-STD-883, Method 5005
Subgrp Description Temp ( C)
o
1 Static tests at +25
2 Static tests at +125
3 Static tests at -55
4 Dynamic tests at +25
5 Dynamic tests at +125
6 Dynamic tests at -55
7 Functional tests at +25
8A Functional tests at +125
8B Functional tests at -55
9 Switching tests at +25
10 Switching tests at +125
11 Switching tests at -55
1
MICROCIRCUIT DATA SHEET
MN100325-X REV 1B0
Features
- Pin/function compatible with 100125
- 50% power reduction of the 100125
- Differential inputs with built in offset
- 2000V ESD protection
- -4.2V to -5.7V operating range
- Available to industrial grade temperature range
- Available to MIL-STD-883
CONTROLLING DOCUMENTS:
100325DMQB 5962-9153101MXA
100325FMQB 5962-9153101MYA
100325J-QMLV 5962-9153101VXA
100325W-QMLV 5962-9153101VYA
100325WFQMLV 5962F9153101VYA
2
MICROCIRCUIT DATA SHEET
MN100325-X REV 1B0
(Absolute Maximum Ratings)
(Note 1)
Storage Temperature (Tstg) -65 C to +150 C
Maximum Junction Temperature (Tj) +175 CCeramic +150 CPlastic
Vee Pin Potential to Ground Pin -7.0V to +0.5V
Input Voltage (DC) -0.5V to +6.0V
Output Current (DC Output HIGH) -50mA
ESD
(Note 2) > 2000V
VTTL Pin Potential to Ground Pin -0.5V to +6.0V
Note 1: Absolute maximum ratings are those values beyond which the device may be damaged or
have its useful life impaired. Functional operation under these conditions is not
implied.
Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
Recommended Operating Conditions
Case Temperature (Tc) 0 C to +85 CCommercial -55 C to +125 CMilitary -40 C to +85 CIndustrial
Supply Voltage (Vee) -5.7V to -4.2V
3
MN100325-X REV 1B0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: Vee Range: -4.2V to -5.7V, VTTL RANGE:4.5V to 5.5V,Tc=-55c to +125c, VCC=GND
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
IIH Input HIGH
Current VEE=-5.7V, VTTL=5.0V, VM=-0.87V 1, 3 INPUTS 350 uA 1, 2
1, 3 INPUTS 500 uA 3
IIL Input Low Current VEE=-4.2V, VTTL=5.0V, VM=-1.83V 1, 3 INPUTS 0.5 uA 1, 2,
3
VOH Output HIGH
Voltage VEE=-4.2V/-5.7V, VTTL=4.5V,
VIH=-0.87V, VIL=-1.83V, IOH=-2.0mA 1, 3 OUTPUTS 2.5 V 1, 2
1, 3 OUTPUTS 2.4 V 3
VOL Output LOW
Voltage Vee=-4.2V/-5.7V, VTTL=4.5V,
VIH=-0.87V, VIL=-1.83V, IOL=20.0mA 1, 3 OUTPUTS 0.5 V 1, 2,
3
IOS Short-Circuit
Current VEE=-4.5V, VTTL=5.5V, VM=0.0V 1, 3 OUTPUTS -60 -150 mA 1, 2,
3
ICEX Output HIGH
Leakage Current VEE=-4.5V, VTTL=5.5V, VM=5.5V 1, 3 OUTPUTS 250 uA 1, 2,
3
VBBX Output Reference
Voltage VEE=-4.5V, VTTL=5.0V, IM=-3uA 1, 3 VBB -1260 mV 1, 2,
3
VBBN Output Reference
Voltage VEE=-5.7V, VTTL=5.0V, IM=-2.1mA 1, 3 VBB -1380 mV 1, 2
VEE= -5.7V, VTTL=5.0V, IM=-3mA 1, 3 VBB -1396 mV 3
VIH Input HIGH
Voltage OTHER INPUT AT VBB 1,
3, 7 INPUTS -1165 -870 mV 1, 2,
3
VIL Input LOW Voltage OTHER INPUT AT VBB 1,
3, 7 INPUTS -1830 -1475 mV 1, 2,
3
VCM Common Mode
Voltage VEE= -4.2/-5.7V, VTTL=4.5V 1,
3, 7 INPUTS -2000 -500 mV 1, 2,
3
VDIF Input Voltage
Differential VEE= -4.2/-5.7V, VTTL=4.5V 1,
3, 7 INPUTS 150 mV 1, 2,
3
IEE Power Supply
Current VEE=-4.2/-5.7V, VTTL=5.0V, VIN=VBB 1, 3 VEE -35 -12 mA 1, 2,
3
ITTL Power Supply
Current VEE=-4.5V, VTTL=5.5V, VIN=VBB 1, 3 VTTL 65 mA 1, 2,
3
4
MN100325-X REV 1B0 MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: Vee Range: -4.2V to -5.7V, VTTL Range: 4.5V to 5.5V, VCC=GND, LOADING: 50 pF/500 Ohms
SYMBOL PARAMETER CONDITIONS NOTES PIN-
NAME MIN MAX UNIT SUB-
GROUPS
tpLH/tpHL Propagation Delay VEE=-4.2/-5.7V, VTTL=4.5/5.5V, VCC=GND 2, 4 Dn to
Qn 1.6 4.7 ns 9
2, 4 Dn to
Qn 1.7 5.7 ns 10
2, 4 Dn to
Qn 1.5 5.0 ns 11
tTLH/tTHL Transistion Time VEE=-4.2/-5.7V, VTTL=4.5/5.5V, VCC=GND 6 Qn 0.5 2.5 ns 9, 10
6 Qn 0.5 3.0 ns 11
Note 1: Screen tested 100% on each device at -55 C, +25 C and +125 C temp., subgroups 1, 2,
3, 7 & 8.
Note 2: For QB devices, screen tested 100% on each device at +25C temperature only, subgroup
A9. For QMLV devices, screen tested 100% on each device at +25C, +125C & -55C
temperature, subgroup A9, 10 & 11.
Note 3: Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C, +125 C & -55 C temp.,
subgroups A1, 2, 3, 7 & 8.
Note 4: Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C, subgroup A9, and at
+125 C & -55 C temp., subgroups A10 & 11.
Note 5: Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C temp. only, subgroup
A9.
Note 6: Not tested at +25 C, +125 C & -55 C temp. (DESIGN CHARACTERIZATION DATA).
Note 7: Guaranteed by applying specified input condition and testing VOH/VOL.
5
MICROCIRCUIT DATA SHEET
MN100325-X REV 1B0
Graphics and Diagrams
GRAPHICS# DESCRIPTION
J24ERJ CERDIP (J), 24LD, .400 CENTERS (P/P DWG)
P000054A CERDIP (J), 24LD .400 CENTERS (PIN OUT)
P000055A CERPACK, QUAD, 24 LEAD (PIN OUT)
W24BRE CERPACK, QUAD, 24 LEAD (P/P DWG)
See attached graphics following this page.
6
MICROCIRCUIT DATA SHEET
MN100325-X REV 1B0
Revision History
Rev ECN # Rel Date Originator Changes
1B0 M0004382 05/07/04 Rose Malone Update MDS: MN100325-X, Rev. 1A0 to 1B0. Added NSID
100325WFQMLV to Main Table and to Features Section.
7
