MICROCIRCUIT DATA SHEET Original Creation Date: 10/30/95 Last Update Date: 05/07/04 Last Major Revision Date: 08/21/96 MN100325-X REV 1B0 HEX ECL-to-TTL TRANSLATOR General Description The 100325 is a hex translator for converting F100K logic level to TTL logic levels. Differential inputs allow each circuit to be used as an inverting, non-inverting or differential receiver. An internal reference voltage generator provides VBB for single-ended operation or for use in Schmitt trigger applications. All inputs have 50K ohms pull-down resistors; therefore, the outputs will go LOW when the inputs are left unconnected. When used in the differential mode, the inputs have a common mode rejection of +1V, making this device tolerant of ground offsets and translents between the signal source and the translator. The VEE and VTTL power may be applied in either order. Industry Part Number NS Part Numbers 100325 100325DMQB 100325FMQB 100325J-QMLV 100325W-QMLV 100325WFQMLV Prime Die F325 Controlling Document SEE FEATURES SECTION Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MICROCIRCUIT DATA SHEET MN100325-X REV 1B0 Features - Pin/function compatible with 100125 50% power reduction of the 100125 Differential inputs with built in offset 2000V ESD protection -4.2V to -5.7V operating range Available to industrial grade temperature range Available to MIL-STD-883 CONTROLLING DOCUMENTS: 100325DMQB 5962-9153101MXA 100325FMQB 5962-9153101MYA 100325J-QMLV 5962-9153101VXA 100325W-QMLV 5962-9153101VYA 100325WFQMLV 5962F9153101VYA 2 MICROCIRCUIT DATA SHEET MN100325-X REV 1B0 (Absolute Maximum Ratings) (Note 1) Storage Temperature (Tstg) -65 C to +150 C Maximum Junction Temperature (Tj) Ceramic Plastic Vee Pin Potential to Ground Pin +175 C +150 C -7.0V to +0.5V Input Voltage (DC) -0.5V to +6.0V Output Current (DC Output HIGH) -50mA ESD (Note 2) > 2000V VTTL Pin Potential to Ground Pin -0.5V to +6.0V Note 1: Note 2: Absolute maximum ratings are those values beyond which the device may be damaged or have its useful life impaired. Functional operation under these conditions is not implied. ESD testing conforms to MIL-STD-883, Method 3015. Recommended Operating Conditions Case Temperature (Tc) Commercial Military Industrial Supply Voltage (Vee) 0 C to +85 C -55 C to +125 C -40 C to +85 C -5.7V to -4.2V 3 MICROCIRCUIT DATA SHEET MN100325-X REV 1B0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vee Range: -4.2V to -5.7V, VTTL RANGE:4.5V to 5.5V,Tc=-55c to +125c, VCC=GND SYMBOL IIH PARAMETER Input HIGH Current CONDITIONS NOTES VEE=-5.7V, VTTL=5.0V, VM=-0.87V PINNAME MIN MAX UNIT SUBGROUPS 1, 3 INPUTS 350 uA 1, 2 1, 3 INPUTS 500 uA 3 uA 1, 2, 3 IIL Input Low Current VEE=-4.2V, VTTL=5.0V, VM=-1.83V 1, 3 INPUTS 0.5 VOH Output HIGH Voltage VEE=-4.2V/-5.7V, VTTL=4.5V, VIH=-0.87V, VIL=-1.83V, IOH=-2.0mA 1, 3 OUTPUTS 2.5 V 1, 2 1, 3 OUTPUTS 2.4 V 3 VOL Output LOW Voltage Vee=-4.2V/-5.7V, VTTL=4.5V, VIH=-0.87V, VIL=-1.83V, IOL=20.0mA 1, 3 OUTPUTS 0.5 V 1, 2, 3 IOS Short-Circuit Current VEE=-4.5V, VTTL=5.5V, VM=0.0V 1, 3 OUTPUTS -60 -150 mA 1, 2, 3 ICEX Output HIGH Leakage Current VEE=-4.5V, VTTL=5.5V, VM=5.5V 1, 3 OUTPUTS 250 uA 1, 2, 3 VBBX Output Reference Voltage VEE=-4.5V, VTTL=5.0V, IM=-3uA 1, 3 VBB -1260 mV 1, 2, 3 VBBN Output Reference Voltage VEE=-5.7V, VTTL=5.0V, IM=-2.1mA 1, 3 VBB -1380 mV 1, 2 VEE= -5.7V, VTTL=5.0V, IM=-3mA 1, 3 VBB -1396 mV 3 VIH Input HIGH Voltage OTHER INPUT AT VBB 1, INPUTS 3, 7 -1165 -870 mV 1, 2, 3 VIL Input LOW Voltage OTHER INPUT AT VBB 1, INPUTS 3, 7 -1830 -1475 mV 1, 2, 3 VCM Common Mode Voltage VEE= -4.2/-5.7V, VTTL=4.5V 1, INPUTS 3, 7 -2000 -500 mV 1, 2, 3 VDIF Input Voltage Differential VEE= -4.2/-5.7V, VTTL=4.5V 1, INPUTS 3, 7 150 mV 1, 2, 3 IEE Power Supply Current VEE=-4.2/-5.7V, VTTL=5.0V, VIN=VBB 1, 3 VEE -35 -12 mA 1, 2, 3 ITTL Power Supply Current VEE=-4.5V, VTTL=5.5V, VIN=VBB 1, 3 VTTL 65 mA 1, 2, 3 4 MICROCIRCUIT DATA SHEET MN100325-X REV 1B0 Electrical Characteristics AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vee Range: -4.2V to -5.7V, VTTL Range: 4.5V to 5.5V, VCC=GND, LOADING: 50 pF/500 Ohms SYMBOL tpLH/tpHL tTLH/tTHL PARAMETER CONDITIONS Propagation Delay VEE=-4.2/-5.7V, VTTL=4.5/5.5V, VCC=GND Transistion Time Note 1: Note 2: Note 3: Note 4: Note 5: Note 6: Note 7: NOTES VEE=-4.2/-5.7V, VTTL=4.5/5.5V, VCC=GND PINNAME MIN MAX UNIT 2, 4 Dn to Qn 1.6 4.7 ns 9 2, 4 Dn to Qn 1.7 5.7 ns 10 2, 4 Dn to Qn 1.5 5.0 ns 11 6 Qn 0.5 2.5 ns 9, 10 6 Qn 0.5 3.0 ns 11 Screen tested 100% on each device at -55 C, +25 C and +125 C temp., subgroups 1, 2, 3, 7 & 8. For QB devices, screen tested 100% on each device at +25C temperature only, subgroup A9. For QMLV devices, screen tested 100% on each device at +25C, +125C & -55C temperature, subgroup A9, 10 & 11. Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C, +125 C & -55 C temp., subgroups A1, 2, 3, 7 & 8. Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C, subgroup A9, and at +125 C & -55 C temp., subgroups A10 & 11. Sample tested (Method 5005, Table 1) on each MFG. lot at +25 C temp. only, subgroup A9. Not tested at +25 C, +125 C & -55 C temp. (DESIGN CHARACTERIZATION DATA). Guaranteed by applying specified input condition and testing VOH/VOL. 5 SUBGROUPS MICROCIRCUIT DATA SHEET MN100325-X REV 1B0 Graphics and Diagrams GRAPHICS# DESCRIPTION J24ERJ CERDIP (J), 24LD, .400 CENTERS (P/P DWG) P000054A CERDIP (J), 24LD .400 CENTERS (PIN OUT) P000055A CERPACK, QUAD, W24BRE CERPACK, QUAD, 24 LEAD (P/P DWG) 24 LEAD (PIN OUT) See attached graphics following this page. 6 MICROCIRCUIT DATA SHEET MN100325-X REV 1B0 Revision History Rev ECN # 1B0 M0004382 05/07/04 Rel Date Originator Changes Rose Malone Update MDS: MN100325-X, Rev. 1A0 to 1B0. Added NSID 100325WFQMLV to Main Table and to Features Section. 7