MP2143 3A, 5.5V, 1.2MHz, 40A IQ, COT Synchronous Step Down Switcher The Future of Analog IC Technology DESCRIPTION FEATURES The MP2143 is a monolithic, step-down, switchmode converter with internal power MOSFETs. It can achieve up to 3A continuous output current from a 2.5V-to-5.5V input voltage with excellent load and line regulation. The output voltage can be regulated as low as 0.6V. * * * * * * Constant-on-time control provides fast transient response and eases loop stabilization. Faultcondition protections include cycle-by-cycle current limiting and thermal shutdown. * * * * * * The MP2143 is available in small TSOT23-8 package and requires only a minimal number of readily-available standard external components. The MP2143 is ideal for a wide range of applications including high-performance DSPs, FPGAs, smartphones, portable instruments, and DVD drivers. * Wide 2.5V-to-5.5V Operating Input Range Output Voltage as Low as 0.6V 100% Duty Cycle in Dropout Up to 3A Output Current Low IQ: 40A 80m and 40m Internal Power MOSFET Switches Default 1.2MHz Switching Frequency EN and Power-Good for Power Sequencing Cycle-by-Cycle Over-Current Protection Auto Discharge at Power Off Short-Circuit Protect with Hiccup Mode Stable with Low-ESR Output Ceramic Capacitors Available in a TSOT23-8 Package APPLICATIONS * * * Low Voltage I/O System Power Handheld/Battery-powered Systems Wireless/Networking Cards All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Quality Assurance. "MPS" and "The Future of Analog IC Technology" are Registered Trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION VIN 2.5V to 5.5V 2 SW VIN C1 10 F OUT 3 PG 8 1 EN R1 200k FB PG GND VOUT 1.2V/3A 5 MP2143 EN L1 1 H C2 10 F 7 R2 200k 4, 6 MP2143 Rev. 1.05 10/17/2012 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 1 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER ORDERING INFORMATION Part Number* MP2143DJ Package TSOT23-8 Top Marking ACE * For Tape & Reel, add suffix -Z (e.g. MP2143DJ-Z); For RoHS compliant packaging, add suffix -LF (e.g. MP2143DJ-LF-Z) PACKAGE REFERENCE TOP VIEW PG 1 8 EN VIN 2 7 FB SW 3 6 AGND PGND 4 5 OUT SOT23-8 ABSOLUTE MAXIMUM RATINGS (1) Thermal Resistance Supply Voltage VIN ......................................... 6V VSW ........................ (-3V for < 5ns) to (VIN+0.3V) All Other Pins .................................-0.3V to +6 V Junction Temperature ...............................150C Lead Temperature ....................................260C (2) Continuous Power Dissipation (TA = 25C) ............... ............................................... 1.25W Storage Temperature............... -65C to +150C TSOT23-8.............................. 100 ..... 55... C/W Recommended Operating Conditions (3) Supply Voltage VIN ..........................2.5V to 5.5V Output Voltage VOUT ................. 0.6V to VIN -0.5V Operating Junction Temp. (TJ). -40C to +125C MP2143 Rev. 1.05 10/17/2012 (4) JA JC Notes: 1) Exceeding these ratings may damage the device. 2) The maximum allowable power dissipation is a function of the maximum junction temperature TJ (MAX), the junction-toambient thermal resistance JA, and the ambient temperature TA. The maximum allowable continuous power dissipation at any ambient temperature is calculated by PD (MAX) = (TJ (MAX)-TA)/JA. Exceeding the maximum allowable power dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal shutdown circuitry protects the device from permanent damage. 3) The device is not guaranteed to function outside of its operating conditions. 4) Measured on JESD51-7, 4-layer PCB. www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 2 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER ELECTRICAL CHARACTERISTICS (5) VIN = 5V, TA = 25C, unless otherwise noted. Parameter Symbol Feedback Voltage VFB Feedback Current PFET Switch ON Resistance NFET Switch ON Resistance IFB Condition 2.5V VIN 5.5V o o TA=-40 C to +85 C Min Typ Max -1.5% 0.600 +1.5% -2% VFB = 0.63V 10 80 40 RDSON_P RDSON_N VEN = 0V, VIN = 5V VSW = 0V and 5V Switch Leakage PFET Current Limit NFET Switch Sinking Current INSW ON Time tON Switching frequency Minimum OFF Time Soft-Start Time Soft-Stop Time Power-Good Upper Trip Threshold Power-Good Lower Trip Threshold Power-Good Delay Power-Good Sink Current Capability Power-Good Logic High Voltage Power-Good Internal Pull-Up Resistor Under-Voltage Lockout Threshold Rising Under-Voltage Lockout Threshold Hysteresis EN Input Logic Low Voltage EN Input Logic High Voltage EN Input Current Supply Current (Shutdown) Supply Current (Quiescent) Thermal Shutdown Thermal Hysteresis 0.1 4.2 fs VOUT=1.2V, VFB=0.7V VIN=5V, VOUT=1.2V VIN=3.6V, VOUT=1.2V VIN=5V, VOUT=1.2V, IOUT=1A TA=-40oC to +85oC +2% -20% -25% tMIN-OFF tSS-ON tSS-OFF FB voltage respect to the regulation 4.8 100 200 277 1200 1200 50 1.3 1 Units V/% nA m m 2 A A A nS +20% +25% kHz kHz ns ms ms +10% % PGL -10% % PGD 110 s PGH VPG-L Sink 1mA VPG-H VIN=5V, VFB=0.6V 0.4 4.9 V 500 RPG 2.0 2.2 k 2.4 150 V mV 0.4 2 0.1 0.1 V V A A A 40 A 150 30 C C 1.2 VEN=2V VEN=0V VEN=0V VEN=2V, VFB=0.63V, VIN=3.6V V Notes: 5) Guaranteed by design. MP2143 Rev. 1.05 10/17/2012 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 3 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER TYPICAL PERFORMANCE CHARACTERISTICS VIN = 5V, VOUT = 1.2V, L = 1.0H, COUT=22F, TA = 25C, unless otherwise noted. 0.01 0.1 1 10 0.001 0.01 0.1 1 10 2 2.5 3 3.5 4 4.5 5 5.5 6 4.0 5.0 6.0 0.60% 0.40% ERROR 0.20% 0.00% -0.20% -0.40% 0 2 2.5 3 3.5 4 4.5 5 5.5 6 0 0.5 1 1.5 2 2.5 3 3.5 -0.60% 0 0.5 1 1.5 2 2.5 3 3.5 2.0 3.0 80 70 60 50 40 30 20 10 0 MP2143 Rev. 1.05 10/17/2012 4 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 4 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER TYPICAL PERFORMANCE CHARACTERISTICS (continued) VIN = 5V, VOUT = 1.2V, L = 1.0H, COUT=22F, TA = 25C, unless otherwise noted Output Ripple Output Ripple IOUT=0A Vout 50.0mV/div. Vsw 2.00V/div. IL 1.00A/div. Vout 10.0mV/div. Vsw 2.00V/div. Vsw 2.00V/div. IL 1.00A/div. IL 2.00A/div. VIN = 6V, VOUT = 0.6V, IOUT=3A Vout 100mV/div. Vout 20.0mV/div. Vsw 5.00V/div. Vsw 5.00V/div. Vout 500mV/div. Vin 5.00V/div. Vsw 5.00V/div. IL 2.00A/div. IL 2.00A/div. IL 2.00A/div. VIN Power Up with 3A Load Vsw 5.00V/div. IL 2.00A/div. MP2143 Rev. 1.05 10/17/2012 VIN Power Up without Load Output Ripple VIN = 6V, VOUT = 0.6V, IOUT=0A Vin 5.00V/div. IOUT=3A Vout 10.0mV/div. Output Ripple Vout 500mV/div. Output Ripple IOUT=1A VIN Shut Down without Load Vout 500mV/div. Vin 2.00V/div. Vsw 2.00V/div. VIN Shut Down with 3A Load Vout 500mV/div. Vin 2.00V/div. Vsw 2.00V/div. IL 2.00A/div. www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 5 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER .TYPICAL PERFORMANCE CHARACTERISTICS (continued) VIN = 5V, VOUT = 1.2V, L = 1.0H, COUT=22F, TA = 25C, unless otherwise noted. EN Start Up without Load EN Start Up with 3A Load VOUT 500mV/div. VOUT 500mV/div. VEN 2.00V/div. VSW 5.00V/div. VEN 2.00V/div. VSW 5.00V/div. IL 2.00A/div. IL 2.00A/div. EN Shut Down with 3A Load EN Shut Down without Load VOUT 500mV/div. VEN 2.00V/div. VSW 5.00V/div. IL 1.00A/div. Power Good On without Load Power Good On with 3A Load VOUT 1.00V/div. VOUT 500mV/div. VPG 5.00V/div. VSW 5.00V/div. VEN 2.00V/div. VSW 2.00V/div. IL 1.00A/div. IL 2.00A/div. VOUT 500mV/div. VPG 5.00V/div. VSW 5.00V/div. IL 2.00A/div. Power Good Off without Load VOUT 1.00V/div. VPG 5.00V/div. VSW 5.00V/div. IL 1.00A/div. MP2143 Rev. 1.05 10/17/2012 VOUT 500mV/div. VPG 5.00V/div. VSW 5.00V/div. IL 2.00A/div. Power Good Off with 3A Load Load Transient Response VOUT/AC 20.0mV/div. VSW 5.00V/div. IL 2.00A/div. www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 6 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER TYPICAL PERFORMANCE CHARACTERISTICS (continued) VIN = 5V, VOUT = 1.2V, L = 1.0H, COUT=22F, TA = 25C, unless otherwise noted. Short Circuit Entry Short Circuit Short Circuit Recovery VIN= 6V VIN= 6V VIN= 6V VOUT 1.00V/div. VSW 5.00V/div. IL 5.00A/div. MP2143 Rev. 1.05 10/17/2012 VOUT 1.00V/div. VSW 5.00V/div. IL 5.00A/div. VOUT 1.00V/div. VSW 5.00V/div. IL 5.00A/div. www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 7 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER PIN FUNCTIONS TSOT23 Pin # Name 1 PG 2 VIN 3 4 5 6 SW PGND OUT AGND 7 FB 8 EN MP2143 Rev. 1.05 10/17/2012 Description Power-Good Indicator. The pin output is an open drain that connects to VIN by an internal pull-up resistor. PG is pulled up to VIN when the FB voltage is within 10% of the regulation level. If FB voltage is out of that regulation range, it is LOW. Supply Voltage. The MP2143 operates from a 2.5V-to-5.5V unregulated input. C1 prevents large voltage spikes from appearing at the input. Switch Output Power Ground Input Sense. For output voltage feedback Analog ground. Reference for the internal control circuit. Feedback pin. Connect an external resistor divider from the output to GND to set the output voltage. On/Off Control www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 8 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER FUNCTIONAL BLOCK DIAGRAM Figure 1: Functional Block Diagram MP2143 Rev. 1.05 10/17/2012 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 9 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER OPERATION The MP2143 uses constant on-time control with input-voltage feed-forward to stabilize the switching frequency over its full input range. At light load, the MP2143 employs a proprietary control over the low-side MOSFET (LS-FET) and inductor current to eliminate ringing on switching node and to improve efficiency. Constant On-Time Control When compared to fixed-frequency PWM control, constant on-time control offers a simpler control loop and faster transient response. By using input-voltage feed-forward, the MP2143 maintains a nearly constant switching frequency across the entire input and output voltage range. The switching pulse ON time can be estimated as: t ON = VOUT 0.833s VIN To prevent inductor current runaway during the load transient, the MP2143 has a fixed minimum OFF time of 50ns. However, this minimum OFF time limit does not affect the operation of the MP2143 in steady state in any way. Light Load Operation In light load condition, the MP2143 uses a proprietary control scheme to save power and improve efficiency: It gradually ramps down the LS-FET current to its minimum instead of turning off the LS-FET immediately when the inductor current starts to reverse. The gradual current drop avoids ringing at the switching node that always occurs in discontinuous conduction mode (DCM) operation. Enable When the input voltage exceeds the undervoltage lockout (UVLO) threshold--typically 2.2V--the MP2143 is enabled by pulling the EN pin above 1.2V. Leaving the EN pin floating or MP2143 Rev. 1.05 10/17/2012 grounded will disable the MP2143. There is an internal 1M resistor from the EN pin to ground. Soft-Start/Stop MP2143 has a built-in soft-start that ramps up the output voltage at a constant slew rate that avoids overshooting at startup. The soft-start time is typically about 1ms. When disabled, the MP2143 ramps down the internal reference voltage to allow the load to linearly discharge the output. Power GOOD Indictor MP2143 has an open drain with 500k pull-up resistor pin for power good (PG) indication. When the FB pin is within 10% of regulation voltage (0.6V), the PG pin is pulled up to VIN by the internal resistor. If the FB pin voltage is outside the 10% window, the PG pin is pulled to ground by an internal MOSFET. The MOSFET has a maximum Rdson of less than 100. Current limit The MP2143 has a 4.8A current limit for the high side switch (HS-FET). When the HS-FET hits its current limit, the MP2143 enters hiccup mode until the current drops to prevent the inductor current from building and possibly damaging the components. Short Circuit and Recovery The MP2143 also enters short-circuit protection (SCP) mode when it hits the current limit, and tries to recover from the short circuit by entering hiccup mode. In SCP, the MP2143 disables the output power stage, discharges a soft-start capacitor, and then enacts a soft-start procedure. If the short-circuit condition still holds after soft-start ends, the MP2143 repeats this operation until the short circuit ceases and output rises back to regulation level. www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 10 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER APPLICATION INFORMATION COMPONENT SELECTION Where IL is the inductor ripple current. Setting the Output Voltage Choose an inductor current to be approximately 30% of the maximum load current. The maximum inductor peak current is: The external resistor divider sets the output voltage (see the Typical Application schematic on page 1). The feedback resistor R1 must account for both stability and dynamic response, and thus can not be too large or too small. Choose an R1 value between 120k and 200k. R2 is then given by: R2 = R1 Vout -1 0.6 The feedback circuit is shown as Figure 2. Figure 2: Feedback Network Table 1 lists the recommended resistors values for common output voltages. Table 1: Resistor Values for Common Output Voltages VOUT (V) 1.0 1.2 1.8 2.5 3.3 R1 (k) 200(1%) 200(1%) 200(1%) 200(1%) 200(1%) R2 (k) 300(1%) 200(1%) 100(1%) 63.2(1%) 44.2(1%) Selecting the Inductor A 0.82H to 4.7H inductor is recommended for most applications. For highest efficiency, chose an inductor with a DC resistance less than 15m. For most designs, the inductance value can be derived from the following equation. L1 = MP2143 Rev. 1.05 10/17/2012 VOUT x (VIN - VOUT ) VIN x IL x fOSC IL(MAX) = ILOAD + IL 2 Selecting the Input Capacitor The input current to the step-down converter is discontinuous, and requires a capacitor to supply the AC current to the step-down converter while maintaining the DC input voltage. Use low-ESR capacitors for the best performance. Ceramic capacitors with X5R or X7R dielectrics are highly recommended because of their low ESR values and small temperature coefficients. For most applications, a 10F capacitor is sufficient. For higher output voltage, use 47F to improve system stability. Since the input capacitor absorbs the input switching current it requires an adequate ripple current rating. The RMS current in the input capacitor can be estimated by: I C1 = ILOAD x VOUT VOUT x 1- VIN VIN The worse case condition occurs at VIN = 2VOUT, where: IC1 = ILOAD 2 For simplification, choose an input capacitor whose RMS current rating greater than half of the maximum load current. The input capacitor can be electrolytic, tantalum or ceramic. When using electrolytic or tantalum capacitors, use a small high-quality ceramic capacitor (0.1F), placed as close to the IC as possible. When using ceramic capacitors, make sure that they have enough capacitance to prevent excessive voltage ripple at input. The input voltage ripple caused by capacitance can be estimated by: VIN = ILOAD V V x OUT x 1 - OUT fS x C1 VIN VIN www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 11 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER Selecting the Output Capacitor The output capacitor (C2) maintains the output DC voltage. Use ceramic capacitors. Low-ESR capacitors keep the output voltage ripple low. The output voltage ripple can be estimated by: VOUT = VOUT VOUT x 1 - fS x L1 VIN 1 x RESR + 8 x fS x C2 Where L1 is the inductor value and RESR is the equivalent series resistance of the output capacitor. Using ceramic capacitors, the impedance at the switching frequency is dominated by the capacitance. The output voltage ripple is mainly caused by the capacitance. For simplification, the output voltage ripple can be estimated by: VOUT = V VOUT x 1 - OUT VIN 8 x fS x L1 x C2 The high current paths (GND, IN, and SW) should be placed very close to the device using short, direct, and wide traces. The input capacitor needs to be as close as possible to the IN and GND pins. The external feedback resistors should be placed next to the FB pin. Keep the switching node SW short and away from the feedback network. SW R4 VIN OUT R3 1 GND L1 8 2 7 3 6 4 5 C1A C1 Figure 3: Layout Recommendation 2 For tantalum or electrolytic capacitors, the ESR dominates the impedance at the switching frequency. For simplification, the output ripple can be approximated as: VOUT = VOUT V x 1 - OUT fS x L1 VIN x RESR The characteristics of the output capacitor also affect the stability of the regulation system. PCB Recommendation of MP2143 Proper layout of the switching power supplies is very important, and sometimes critical for proper operation. For high-frequency switching converters, poor layout could lead to poor line or load regulation and stability issues. MP2143 Rev. 1.05 10/17/2012 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 12 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER TYPICAL APPLICATION CIRCUITS U1 VIN VIN 2.5-5.5V 2 GND R4 499k EN SW SW IN C2A NS 1206 MP2143 8 VOUT GND OUT 5 EN R1 200k R3 100k PG 1.2V @ 3A 3 1 FB 7 PG GND 4 AGND 6 R2 200k Figure 4: MP2143 Typical Application Circuit MP2143 Rev. 1.05 10/17/2012 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 13 MP2143 - 3A, 5.5V, 1.2MHz, 40A IQ, COT SYNCHRONOUS STEP-DOWN SWITCHER PACKAGE INFORMATION TSOT23-8 See note 7 EXAMPLE TOP MARK PIN 1 ID RECOMMENDED LAND PATTERN TOP VIEW SEATING PLANE SEE DETAIL ''A'' FRONT VIEW SIDE VIEW NOTE: DETAIL ''A'' 1) ALL DIMENSIONS ARE IN MILLIMETERS. 2) PACKAGE LENGTH DOES NOT INCLUDE MOLD FLASH, PROTRUSION OR GATE BURR. 3) PACKAGE WIDTH DOES NOT INCLUDE INTERLEAD FLASH OR PROTRUSION. 4) LEAD COPLANARITY (BOTTOM OF LEADS AFTER FORMING) SHALL BE 0.10 MILLIMETERS MAX. 5) JEDEC REFERENCE IS MO-193, VARIATION BA. 6) DRAWING IS NOT TO SCALE. 7) PIN 1 IS LOWER LEFT PIN WHEN READING TOP MARK FROM LEFT TO RIGHT, (SEE EXAMPLE TOP MARK) NOTICE: The information in this document is subject to change without notice. Please contact MPS for current specifications. Users should warrant and guarantee that third party Intellectual Property rights are not infringed upon when integrating MPS products into any application. MPS will not assume any legal responsibility for any said applications. MP2143 Rev. 1.05 10/17/2012 www.MonolithicPower.com MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. (c) 2012 MPS. All Rights Reserved. 14 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Monolithic Power Systems (MPS): MP2143DJ-LF-Z MP2143DJ-Z MP2143DJ-LF-P MP2143DJ-P