WINSTAR Professional LCD Module Manufacture WG240128B 240x128dots Graphic Dimension drawing 152,00.5 144.00.5 128.0 : 14.3 MAX 10.3 MAX 107. | 9.2 [7] 5.2 | 0.45 0.43 a 240*148 DOTS S eee Se Ss eS 99 o|o DOT SIZE SCALE 10/1 20- 1.0 PTH CCFL B/L or LED B/L 2.0 PTH P2.54x19=48.26 138.0 feature Mechanical Data 1. Built-in controller(T6963C ) 2. 1/240 duty cycle Item Standard Value Unit 3. Built-in N/V : - 4. Temperature compensation, optional Module Dimension 144.0x104.0 mm Pin a punet Viewing Area 114.0x64.0 mm 4 oO unction bo SYP Dot Size 0.4x0.4 mm 1 + Vss Power supply (GND) Dot Pitch 0.45x0.45 mm 2 Vdd Powersupply (+5V) Mounting hole 138.0x99.0 mm 3 Vo Power supply for LCD driving Mbsolite Maximum Rating 4 C/D Command/data read/write Standard Value a _| BR _| Batsiees Item Symbol | Unit 6 WR _ Data write min. | typ. | max. 7 DBO Data bus line Power Supply VDD-VSS (4.75) 5.0 5.25| V 8 DB1_ Data bus line Input Voltage vi -0.3|) --- | vop| Vv : Note : VSS=0 Volt, VDD=5.0 Volt. 9 DB2_ Data bus line 10 DB3 Databus line Llectronical Characterfstics 11 DB4_ Data bus line Standard Value Item Symbol] Condition Unit 12 DB5_ Data bus line min.| typ.|max, ; | tVolt VDD L level O.7\pp | --- Vop 13 DB6 Data bus line Npurwolsge VIO H level = aise: 0.3Vpp| V 14 DB7 Data bus line Supply Current | 1pp VDD=5V 0 | 55 | 60 |ma 15 CE Chip enable Recommended LC Driving oc 20.3 | 21.4 | 22.5 16 RESET Reset signal Voltage for Normal Temp. | Woyp.vo 25 18.0} 194/202! y 17 Vee Negative Voltage Yearnee 50c 17.8| 18.9| 20.0 1418 MD2_ Control signal LED Forward Voltage) VF 25C 42 | -- |v 19 FS1__ Font selection LED Forward Current) = IF 25C --- | 900 | 1800|mA cca VF 25.C 250 | 590 |Vms 20 NC No connection I 25 -_| 5.5 | mA EL = _ - | | 5.0 | mA