1N4001GP-1N4007GP 1N4001GP - 1N4007GP Features * Low forward voltage drop. * High surge current capability. * High reliability. * High current capability. DO-41 COLOR BAND DENOTES CATHODE 1.0 Ampere Glass Passivated Rectifiers Absolute Maximum Ratings* Symbol IF(AV) TA = 25C unless otherwise noted Parameter Value Units 1.0 A 30 A 3.0 20 50 W mW/C C/W RJA Average Rectified Current .375 " lead length @ TA = 75C Non-repetitive Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25C Thermal Resistance, Junction to ambient Tstg Storage Temperature Range -65 to +175 C TJ Operating Junction Temperature -65 to +175 C IFSM PD *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Electrical Characteristics Symbol TA = 25C unless otherwise noted Parameter Device 4001GP 4002GP 4003GP 4004GP Units 4005GP 4006GP 4007GP VRRM Maximum Repetitive Reverse Voltage 50 100 200 400 600 800 1000 V VRMS Maximum RMS Voltage 35 70 140 280 420 560 700 V VR DC Reverse Voltage (Rated VR) Maximum Instantaneous Reverse Current @ rated VR TA = 25C TA = 125C Maximum Instantaneous Forward Voltage @ 1.0 A Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz 50 100 200 400 600 800 1000 V IRM VFM C 2001 Fairchild Semiconductor Corporation 5.0 50 1.1 A A V 8.0 pF 1N4001GP-1N4007GP, Rev. A1 (continued) Typical Characteristics Forward Current Derating Curve 1.6 FORWARD CURRENT (A) PEAK FORWARD SURGE CURRENT (A) Non-Repetitive Surge Current 40 30 20 10 1.4 1.2 1 0.8 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD .375" 9.0 mm LEAD LENGTHS 0.6 0.4 0.2 0 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 0 Typical Junction Capacitance 175 Forward Characteristics 50 FORWARD CURRENT (A) JUNCTION CAPACITANCE (pF) 50 75 100 125 150 AMBIENT TEMPERATURE ( C) 10 100 20 10 5 2 1 0.1 25 0.5 1 2 REVERSE VOLTAGE (V) 5 10 1 0.1 TA J = 25 C S Pulse Width = 300 200 2% Duty Cycle 1% 0.01 0.4 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 1N4001GP-1N4007GP, Rev. A1 1N4001GP-1N4007GP Glass Passivated Rectifiers DO-41 (Glass) Tape and Ammo Data DO-41 (Glass) Packaging Configuration: Figure 1.0 Soabar Label Corrugated Outer Liner White (Anode) Red/Blue (Cathode) T50R Kraft Paper Wound Between Layers TNR Options 283mm x 257mm x 203mm Intermediate Box (6,000 cap) DO-41 (Glass) Packaging Information Table : Figure 2.0 DO-41 (Glass) Packaging Information Packaging Option T50R T50A Packaging type TNR Ammo Standard (no flow code) Bag Qty per Reel/Tube/Bag 3,000 3,000 250 Reel Size (inch diameter) 10.5 - - 52 52 - Inside Tape Spacing (mm) Int Box Dimension (mm) 283x257x203 406x267x184 381x203x127 Soabar Label sample TM 1N4744A MARK REV A2 PART No. PKG Max qty per Box 6,000 30,000 5,000 Weight per unit (gm) 0.320 0.320 0.320 QTY - Q.C. Weight per Reel (kg) 1.356 1.077 P.O. No. TYPE BLK-BRN EC No. 3,000 M.O. No. OX5046F035 DATE D9903 MFD. UNDER US PAT 3.025.589 & OTHER US PATS & APPLICATIONS Bulk Note/Comments DO-41 (Glass) Bulk Packing Configuration: Figure 3.0 102mm x 76mm x 127mm Immediate Box (1,000 cap) 133mm x 95mm Anti-static bag (250/bag) 381mm x 203mm x 127mm Intermediate Box (5,000 cap) (c)2000 Fairchild Semiconductor International August 2000, Rev. B DO-41 (Glass) Tape and Ammo Data, continued DO-41 (Glass) Ammo Packing Configuration: Figure 4.0 254mm x 79mm x 79mm Immediate Container (3,000 cap) T50A Option 406mm x 267mm x 184mm Intermediate Container (50,000 cap) for T50A option DO-41 (Glass) Taping Dimension: Figure 5.0 H TAPING DIMENSIONS G L1 INCH MM MILS NOTES A 2.520 +0.066/ -0.027 64.00 +1.69/ -0.69 2519 +66.5/ -27.0 Overall width B 2.0470.027 52 0.69 204727 Inside Tape Spacing C 0.200 0.0157 5.08 0.40 200 15.7 Component Pitch D 0.047(max) 1.2(max) 47(max) Component Misalignment E 0.022(max) 0.55(max) 22(max) Tape Mismatch F 0.027(max) 0.69 27 Units in line w/ one another G 0.126(min) 3.2(min) 126(min) Lead amount between tapes H 0 0 0 Lead amount beyond tapes L1-L2 0.027 0.69 27 Delta between two leads F B A L2 E D C DO-41 (Glass) Reel Dimension: Figure 6.0 REEL DIMENSIONS ITEM DESCRIPTION SYMBOL MINIMUM MAXIMUM Reel Diameter D1 10.375 10.625 Arbor Hole Diameter (Standard) D2 1.245 1.255 Core Diameter D3 3.190 3.310 Flange to Flange Outer Width W1 D1 D2 3.400 Note: All Dimensions are in inches W1 D3 August 2000, Rev. B DO-41 (Glass) Package Dimensions DO-41 (FS PKG Code D4) 1:1 Scale 1:1 on letter size paper Dimensions shown below are in: inches [millimeters] Part Weight per unit (gram): 0.32 1.0 min (25.4) 0.205 (5.21) 0.160 (4.06) (c)2000 Fairchild Semiconductor International 0.107 (2.72) 0.080 (2.03) 0.034 (0.86) 0.028 (0.71) July 2000, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM BottomlessTM CoolFETTM CROSSVOLTTM DOMETM E2CMOSTM EnSignaTM FACTTM FACT Quiet SeriesTM FAST FASTrTM GlobalOptoisolatorTM GTOTM HiSeCTM ISOPLANARTM MICROWIRETM OPTOLOGICTM OPTOPLANARTM PACMANTM POPTM PowerTrench QFETTM QSTM QT OptoelectronicsTM Quiet SeriesTM SILENT SWITCHER SMART STARTTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TinyLogicTM UHCTM VCXTM DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. G