ATC 920 C Series X7R Ceramic RF Power Multilayer Capacitors * Case C Size (.250" x .250") * Capacitance Range 0.01 F to 1 F * Low ESR/ESL * Mid-K * Rugged Construction * High Reliability * Manufactured for ATC ATC's 920C Series MLC capacitors offer superior quality at a competitive price. This MLC Series is manufactured for ATC in accordance with ATC's high quality standards. Ceramic construction provides a rugged and reliable hermetic package. Available termination styles include a standard solder plate over a nickel barrier for most applications and palladium silver for non-magnetic applications commonly used in medical electronics. Typical functional applications: Bypass, Coupling, and DC Blocking. Typical circuit applications: HF Amplifiers, Switching Mode Power Supplies (SMPS), High Frequency SMPS Filters. ELECTRICAL AND MECHANICAL SPECIFICATIONS DISSIPATION FACTOR (DF): 2.5% max. at 1 KHz. TEMPERATURE COEFFICIENT OF CAPACITANCE (TCC): Less than 15% (-55C to +125C) INSULATION RESISTANCE (IR): 0.01 MFd to 1 MFd 1000 megohms min. @ +25C at rated WVDC. 100 megohms min. @ +125C at rated WVDC. WORKING VOLTAGE (WVDC): ENVIRONMENTAL TESTS See Capacitance Values Table, page 2. ATC 920 C Series Capacitors are designed and manufactured to meet and exceed the requirements of EIA-198, MIL-PRF-55681 and MIL-PRF-123. DIELECTRIC WITHSTANDING VOLTAGE (DWV): THERMAL SHOCK: PIEZOELECTRIC EFFECTS: Negligible MIL-STD-202, Method 107, Condition A. MOISTURE RESISTANCE: MIL-STD-202, Method 106. LOW VOLTAGE HUMIDITY: Case C: 250% of rated WVDC for 5 secs. AGING EFFECTS: 3% maximum per decade hour. DIELECTRIC ABSORPTION: 2% typical OPERATING TEMPERATURE RANGE: -55C to +125C (No derating of working voltage). MIL-STD-202, Method 103, Condition A, with 1.5 Volts DC applied while subjected to an environment of 85C with 85% relative humidity for 240 hours min. TERMINATION STYLE: W Termination - Solder Plate. LIFE TEST: TERMINAL STRENGTH: Terminations for chips, withstand a pull of 10 lbs. min., 15 lbs. typical, for 5 seconds in direction perpendicular to the termination surface of the capacitor. Test per MIL-STD-202, method 211. MIL-STD-202, Method 108, for 2000 hours, at 125C. 200% WVDC applied. CN Termination (Non-Magnetic) Palladium Silver See Mechanical Configuration Table, page 2. ATC # 001-959 Rev A; 4/02 ATC 920 C Capacitance Values CAP. CODE CAP. (MFd) 103 153 223 333 473 683 104 154 224 334 474 684 824 105 .010 .015 .022 .033 .047 .068 .10 .15 .22 .33 .47 .68 .82 1.0 TOL. RATED WVDC 300 300 300 250 250 250 200 200 200 150 150 150 100 100 K, M VRMS = 0.707 X WVDC ATC PART NUMBER CODE ATC 920 C 10 5 M W 100 * Series R Packaging R - Tape and Reel S - Strip Tape Case Size Capacitance Code: First 2 significant digits for capacitance. * Indicates number of zeros following digits of capacitance in picofarads except for decimal values. = No Marking CAPACITANCE TOLERANCE M Code K Tol. 10% 20% WVDC Capacitance Tolerance See Table at right Termination Code The above part number refers to a 920 C Series (case size C) 1.0 MFd capacitor, M tolerance (20%), 100 WVDC, with W termination (solder plate) and Tape and Reel Packaging. ATC 920 C Capacitors: Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE 920C W OUTLINES CASE SIZE & TYPE BODY DIMENSIONS - Inches (mm) W/T IS A TERMINATION SURFACE LENGTH (L) W L T THICKNESS (T) OVERLAP (Y) .157 (3.98) max. .045 (1.14) max. MATERIALS SOLDER PLATE 0.22 +.020 -.010 .250 .01 (5.58 (6.35 0.25) +0.51 -0.25) Y C Solder Plate WIDTH (W) LEAD AND TERMINATION DIMENSIONS AND MATERIALS Nickel barrier, solder plated. Rugged high performance termination for lower cost, high volume applications ATC 920 C Capacitors: Non-Magnetic Mechanical Configurations ATC SERIES & CASE SIZE ATC TERM. CODE 920C CN OUTLINES CASE SIZE & TYPE BODY DIMENSIONS - Inches (mm) W/T IS A TERMINATION SURFACE LENGTH (L) 0.22 +.020 -.010 .250 .01 (5.58 (6.35 0.25) +0.51 -0.25) Y W C Non-Mag Chip L WIDTH (W) T LEAD AND TERMINATION DIMENSIONS AND MATERIALS THICKNESS (T) OVERLAP (Y) .157 (3.98) max .045 (1.14) max. MATERIALS NON-MAGNETIC PALLADIUM SILVER TERMINATIONS ATC accepts orders for our parts using designations with or without the "ATC" prefix. Both methods of defining the part number are equivalent, i.e., part numbers referenced with the "ATC" prefix are interchangeable to parts referenced without the "ATC" prefix. Customers are free to use either in specifying or procuring parts from American Technical Ceramics. For additional information and catalogs contact your ATC representative or call direct at (631) 622-4700. ATC has made every effort to have this information as accurate as possible. However, no responsibility is assumed by ATC for its use, nor for any infringements of rights of third parties which may result from its use. ATC reserves the right to revise the content or modify its product line without prior notice. (c) 2002 American Technical Ceramics Corp. ATC # 001-959 Rev. A; 4/02 A M E R I C A N T E C H N I C A L ATC North America 631-622-4700 * sales@atceramics.com w w w C E R A M I C S ATC Europe +46 8 6800410 * sales@atceramics-europe.com . a t c e r a m i c s ATC Asia 631-622-4700 * sales@atceramics.com . c o m 2