REV CHANGE Drawn THREAD 4-40 UNC 2B 11/2 THREADS MAX. TO MINOR DIA. DATE DRN CHK 02/08/17 SJ T THREAD 4-40 UNC 2A 1/4 [6.35] HEX 1/4 [6.35] 15/32 [11.91] NOTES: 1. Material : Aluminum 2. Finish : No Plating 3. ASME Y14.5M - 2009 4. All Drawing Dimensions are in Inches [mm] 5. Unless otherwise specified; Edge Breaks, Radii or Countersinks 0.005-0.015 95 Silvermine Rd.,Seymour CT 06483 Tel: 203-888-2133, Fax: 203-888-9860 This Drawing is the Property of RAF. It contains confidential, proprietary information that is RAF property. Do not disclose to or duplicate for others except as authorized by RAF. 3/16 [4.76] COMPONENT STANDOFFS TOLERANCES ALL DIMENSIONS ARE INCHES (UNLESS OTHERWISE SPECIFIED) METALLIC LENGTHS </=: 6 INCHES 0.005 LENGTH >: 6 INCHES 0.010 DIAMETERS: 0.005 NON-METALLIC LENGTH: 0.010 DIAMETERS: 0.010 INTERNAL THREADS: MINIMUM THREAD DEPTH 4533T-440-AL 1/4 HEX MALE FEMALE STANDOFFS SCALE N.T.S. SHEET 1 of 1