SPEC NO: DSAA8159 REV NO: V.11 DATE: NOV/01/2010 PAGE: 1 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1338000004
20mm BIG LAMP
Part Number: DLA/6ID High Efficiency Red
Features
z12 pins.
zHigh luminous intensity.
zLow power consumption.
zWide viewing angle.
zCategorized for luminous intensity.
zExcellent on/off contrast.
zEasy mounting on P.C. board or sockets.
zSolid state reliability.
zRoHS compliant.
Description
The High Efficiency Red source color devices are made with
Gallium Arsenide Phosphide on Gallium Phosphide Orange
Light Emitting Diode.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the leads emerge from the package.
4. Specifications are subject to change without notice.
SPEC NO: DSAA8159 REV NO: V.11 DATE: NOV/01/2010 PAGE: 2 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1338000004
Selection Guide
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Absolute Maximum Ratings at TA=25°C
Electrical / Optical Characteristics at TA=25°C
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Notes:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
2. 2mm below package base.
Part No. Dice Lens Type
V
iewing
Angle [1]
Min. Typ. 2θ1/2
DLA/6ID High Efficiency Red (GaAsP/GaP) RED DIFFUSED 20 49
120°
Iv (mcd) [2]
@ 10mA
Symbol Parameter Device Typ. Max. Units Test Conditions
λpeak Peak Wavelength High Efficiency Red 627 nm IF=20mA
λD [1] Dominant Wavelength High Efficiency Red 625 nm IF=20mA
Δλ1/2 Spectral Line Half-width High Efficiency Red 45 nm IF=20mA
C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz
VF [2] Forward Voltage High Efficiency Red 2 2.5 V IF=20mA
IR Reverse Current High Efficiency Red 10 uA VR = 5V
Parameter High Efficiency Red Units
Power dissipation 75 mW
DC Forward Current 30 mA
Peak Forward Current [1] 160 mA
Reverse Voltage 5 V
Operating/Storage Temperature -40°C To +85°C
Lead Solder Temperature [2] 260°C For 3-5 Seconds
SPEC NO: DSAA8159 REV NO: V.11 DATE: NOV/01/2010 PAGE: 3 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1338000004
High Efficiency Red DLA/6ID
SPEC NO: DSAA8159 REV NO: V.11 DATE: NOV/01/2010 PAGE: 4 OF 4
APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1338000004
PACKING & LABEL SPECIFICATIONS DLA/6ID
