Operating Temperature Range -40C to +130C Temperature Rise, Maximum +50C Operating Frequency Up to 3MHz RoHS Compliant NOT SUPPORTED FOR NEW DESIGN FOR AUTOMOTIVE DESIGNS, PLEASE REFER TO HA72L FOR INDUSTRIAL DESIGNS, PLEASE REFER TO HM72L Specification @ 25C Inductance(1) H20% Part Number HM72B-06R10LF HM72B-06R15LF HM72B-06R20LF HM72B-06R33LF HM72B-06R47LF HM72B-06R68LF HM72B-06R82LF HM72B-061R0LF HM72B-061R5LF HM72B-062R2LF HM72B-063R3LF HM72B-064R7LF HM72B-066R8LF HM72B-06100LF HM72B-06220LF HM72B-06330LF 0.10 0.20 0.20 0.33 0.47 0.68 0.82 1.00 1.50 2.20 3.30 4.70 6.80 10.0 33.0 33.0 DCR (m) Hea Current(2) (Adc) Isat(3) (Adc) Typ. Max. 26.2 23.3 20.3 18.0 16.1 14.4 12.0 10.3 8.4 8.3 6.6 5.4 4.1 3.2 1.8 2.2 1.8 45.0 52.0 30.0 22.0 20.0 16.5 14.0 14.0 8.5 10.0 8.0 8.5 6.5 8.0 6.5 5.0 4.0 2.5 3.0 2.5 1.5 1.9 2.5 3.2 4.0 5.0 7.2 9.0 13.0 15.0 26.5 35.0 62.0 100.0 302.0 219.0 302.0 1.7 2.5 2.8 3.9 4.2 5.5 8.0 10.0 14.0 20.0 28.0 40.0 68.0 105.0 332.0 241.0 332.0 Notes: (1) Inductance is measured at 100 kHz, 0.1Vac without DC current. (2) The Heating Current is the DC current which causes the component temperature to increase by 50C. This current is determined by soldering the component on a typical application PCB, and then applying the current to the device for 30 minutes. (3) The saturation current (Isat) is the approximate current at which the inductance will be decreased by 20% typical from its initial (zero DC) value. Outline Dimensions (mm) Top View Side View 7.30 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT Electronics plc Bottom View Recommended PCB layout 8.3 BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/magnetics/customer-service-enquiry Rev. 02 10.17 High Power High Performance Molded Surface Mount Inductors Model HM72B-06 Series Electrical Characteristic @ 25C General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT Electronics plc BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/magnetics/customer-service-enquiry Rev. 02 10.17 High Power High Performance Molded Surface Mount Inductors Model HM72B-06 Series General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT Electronics plc BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/magnetics/customer-service-enquiry Rev. 02 10.17 High Power High Performance Molded Surface Mount Inductors Model HM72B-06 Series Packaging / Ordering Information One reel (13") 2000 pcs One shipping carton (6 reels) 12000 pcs Ordering Information HM72B - 06 R33 LF TR13 Model Series Case Size Inductance Code: First 2 digits are significant. Last digit denotes number of trailing zeros. For values below 10-H, "R" denotes the decimal point. General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics' own data and is considered accurate at time of going to print. (c) TT Electronics plc 13" tape & reel packing Lead Free BI Technologies A-1445, Jalan Tanjung Api 25050 Kuantan Pahang Darul Makmur Malaysia Ph: +60 9 565 8888 Fax: +60 9 514 3555 http://www.ttelectronics.com/magnetics/customer-service-enquiry Rev. 02 10.17