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to 100 mm (wide view) ,QIUDUHG%HDP ,QIUDUHG%HDP 1RWH 7KHUHIOHFWRULVVROGVHSDUDWHO\6HOHFWWKHUHIOHFWRUPRGHOPRVWVXLWHGWRWKHDSSOLFDWLRQ 7KHVHQVLQJGLVWDQFHVSHFLILHGLVSRVVLEOHZKHQWKH(56LVXVHG)LJXUHLQSDUHQWKHVLVLQGLFDWHWKHPLQLPXPUHTXLUHGGLVWDQFHEH WZHHQWKHVHQVRUDQGWKHUHIOHFWRU 8VH2PURQVWDQGDUG;6)FRQQHFWRUVHWVWRPDWHZLWK0SLJWDLOFRQQHFWRUYHUVLRQ 3KRWRHOHFWULF6HQVRUZLWK%XLOWLQ$PSOLILHU2LO5HVLVWDQW (=. Reflectors for Retroreflective Models Stock Note: Shaded models are normally stocked. Name Sensing distance (typical) Model Reflector 100 mm to 2 m E39-R1 100 mm to 3 m E39-R1S 100 mm to 5 m E39-R2 100 mm to 2.5 m E39-R9 100 mm to 3.5 m E39-R10 Miniature reflector 50 mm to 1.5 m E39-R3 Tape reflector 150 mm to 700 mm E39-RS1 150 mm to 1.1 m E39-RS2 150 mm to 1.4 m E39-RS3 Note: The actual sensing distance may be reduced to approximately 70% of the typical sensing distance when using a reflector other than the E39R1 or the E39-R1S. Mounting Brackets Stock Note: Shaded models are normally stocked. 2 Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K Specifications Ratings/Characteristics Sensing method Model Item Through-beam Retroreflective (Polarized) Diffuse-reflective NPN output E3Z-T61K (-M3J) E3Z-R16K (-M3J) E3Z-D61K (-M3J) PNP output E3Z-T81K (-M3J) E3Z-R81K (-M3J) E3Z-D81K (-M3J) Sensing distance 3 m (100 mm)* (when using E39-R1S) 15 m 2 m (100 mm)* (when using E39-R1) Standard sensing object Opaque:12 mm dia. min. Hysteresis --- Directional angle White paper (100 x 100 mm): 100 mm E3Z-D62K (-M3J) E3Z-D82K (-M3J) White paper (300 x 300 mm): 1 m Opaque: 75 mm dia. min. --- Both emitter and receiver: 3 to 15 2 to 10 --- Light source (wave length) Infrared LED (870 nm) Red LED (660 nm) Infrared LED (860 nm) Power supply voltage 12 to 24 VDC10% including 10% (p-p) max. ripple Current consumption Emitter: 15 mA Receiver: 20 mA Control output Load power supply voltage: 26.4 VDC max. Load current: 100 mA max. (Residual voltage: 1 V max. for a load currents less than 10 mA. and 2 V max. for load currents between 10 mA and 100 mA) Open collector output (NPN or PNP depending on model) L-ON/D-ON selectable Circuit protection Protection from reversed power supply connection, output short-circuit, and reversed output connection Response time Operation or reset: 1 ms max. Sensitivity adjustment One-turn adjuster Ambient illumination (receiver side) Incandescent lamp: 3,000 &x max. Sunlight: 10,000 &x max. Ambient temperature Operating: -25C to 55C/Storage: -40C to 70C (with no icing or condensation) Ambient humidity Operating: 35% to 85%/Storage: 35% to 95% (with no condensation) 20% max. of sensing distance 30 mA max. Protection from reversed power supply connection, output short-circuit, mutual interference, and reversed output connection Insulation resistance 20 M min. at 500 VDC between charged parts and case Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between charged parts and case Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude or 300 m/s2 for 2 hours each in X, Y, and Z directions Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions Degree of protection IEC60529: IP67 Connection method Pre-wired cable (standard length: 2 m) or Pre-wired M8 4-pin connector (standard length: 0.3 m) Indicator Operation indicator (orange) Stability indicator (green) Emitter has power indicator (orange) only. Weight (packed state) Pre-wired cable Material Case PBT (polybutylene terephthalate) Lens Denatured polyarylate Accessories Approx. 120 g Pre-wired M8 4-pin Approx. 50 g connector Approx. 65 g Approx. 30 g Instruction manual (The Mounting Bracket is not provided with any of the above models.) * Figures in parentheses indicate the minimum required distances between the sensors and reflectors. Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 3 Oil Resistance * Although the E3Z-###K Sensors have oil-resistant specifications, performance may be affected by certain types of oil. Refer to the table on the right. * E3Z-###K Sensors are tested for resistance to the oils given in the table on the right. Refer to the information in the table when deciding which type of oil to use. Testing oil classification JIS classification Product name Velocity No. 3 Dynamic viscosity (mm2/s) at 40 C Lubricant --- Water insoluble coolant Class 2, No.5 Daphne Cut No less than 10 to AS-30D less than 50 Class 2, No.11 2.02 pH --- Yushiron Less than 10 Oil No. 2 ac Water soluble Class W1, coolant No. 1 Yushiroken --EC50T-3 7 to 9.5 Yushiron Lubic HWC68 7 to 9.9 Class W1, No. 2 Gryton 1700D 7 to 9.2 Class W2 , No. 1 Yushiroken S50N 7 to 9.8 Note 1. The E3Z-###K maintained a minimum insulation resistance of 100 M after the sensors were dripped in all the above oils for 240 hours. 2. When using the Sensors in environments subject to oils other than those listed above, use the figures for kinetic viscosity and pH as rough guides. Consideration of the effects of additives in the oil may also be required. 3. JIS: Japanese Industrial Standards Output Circuit Diagram NPN Output Model Operating mode E3Z-T61K (-M3J) Light ON E3Z-R61K (-M3J) E3Z-D61K (-M3J) E3Z-D62K (-M3J) Dark ON Timing chart Incident light No incident light Operation ON indicator OFF (orange) ON Output transistor OFF Operate Load (relay) Reset (Between brown and black) L (Light ON) Output circuit (Through-beam receiver) (Retroreflective model) (Diffuse-reflective model) 1 Operation indicator (Orange) (Green) (Control output) 4 Main circuit ZD 3 12 to 24 VDC 100 mA Black max. Load (Relay) Blue 0V Connector Pin Arrangement 2 1 Reset (Between brown and black) 1 Power indicator (orange) 4 3 Pin 2 is not used. (Through-beam emitter) Brown Connector Pin Arrangement 12 to 24 VDC Main circuit 3 4 Brown Stability indicator D (Dark ON) Incident light No incident light Operation ON indicator OFF (orange) ON Output transistor OFF Operate Load (relay) Mode selector Blue Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 2 1 4 3 Pins 2 and 4 are not used. PNP Output Model Operating mode E3Z-T81K (-M3J) Light-ON E3Z-R81K (-M3J) E3Z-D81K (-M3J) E3Z-D82K (-M3J) Timing chart L (Light ON) Incident light No incident light Operation indicator (orange) Output transistor Load (relay) Dark ON Mode selector Output circuit (Through-beam receiver) (Retroreflective model) (Diffuse-reflective model) 1 ON OFF ON Operation indicator (Orange) Stability indicator Main circuit 3 Blue 100 mA max. Load (Relay) 0V D (Dark ON) Incident light No incident light ON OFF Connector Pin Arrangement 2 ON OFF Operate Output transistor Load (relay) Black (Control output) Reset (Between blue and black) Operation indicator (orange) 12 to 24 VDC ZD (Green) 4 OFF Operate Brown 1 4 3 Pin 2 is not used. Reset (Between blue and black) (Through-beam emitter) 1 Brown Power indicator (orange) Connector Pin Arrangement 12 to 24 VDC Main circuit 3 Blue 2 1 4 3 Pins 2 and 4 are not used. Structure of Sensor I/O Connector Wire colors 4 3 2 1 Brown White Blue Black 1 2 3 4 XS3F-M421-402-A XS3F-M421-405-A XS3F-M422-402-A XS3F-M422-405-A Classification Wire color DC Connector pin No. Use Brown A Power supply (+V) White B --- Blue C Power supply (0 V) Black D Output Note: Pin 2 is not used. Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 5 Dimensions Units: mm (inch) Sensor Through-beam E3Z-T61K (-M3J) E3Z-T81K (-M3J) Pre-wired Models 20 10.8 10.4 Emitter Power indicator (orange) 17 7.2 Lens Optical axis 18 8 Connector Models (E3Z-T@1K-M3J) 2.1 31 25.4 11 Terminal Specifications 1 +V 2 --3 0V 4 --Terminals 2 and 4 are not used. 15.5 Vinyl-insulated round cable 4 dia.; standard length: 0.3 m Two, M3 Vinyl-insulated round cable with two conductors, 4 dia. (0.2 mm2 with 1.1-dia. insulator); standard length: 2 m Pre-wired Models Operation indicator (orange) 4 2 3 1 M8 20 12.45 8.8 4.3 3.2 10.8 10.4 Receiver Stability indicator (green) 7.2 Optical axis Lens Connector Models (E3Z-T@1K-M3J) 17 2.1 Terminal Specifications 1 +V 2 --3 0V 4 Output Terminal 2 is not used. 31 25.4 11 18 Operation selector Sensing adjuster Vinyl-insulated round cable 4 dia.; standard length: 0.3 m 15.5 2 Two, M3 Vinyl-insulated round cable with three conductors, 4 dia. (0.2 mm2 with 1.1-dia. insulator); standard length: 2 m 1 4 3 M8 Retroreflective Models E3Z-R61K (-M3J) E3Z-R81K (-M3J) Diffuse-reflective Models E3Z-D61K (-M3J) E3Z-D62K (-M3J) E3Z-D81K (-M3J) E3Z-D82K (-M3J) Pre-wired Models Operation indicator (orange) 20 12.45 8.8 Connector Models 4.3 3.2 (E3Z-D@@K-M3J) (E3Z-R@@K-M3J) 10.8 10.4 Operation selector Sensing adjuster Stability indicator (green) Receiver Optical axis Two, 7-dia. lenses 2.1 17 Terminal Specifications 1 +V 2 --3 0V 4 Output Terminal 2 is not used. Vinyl-insulated round cable 4 dia.; standard length: 0.3 m 2 4 18 4 31 25.4 M8 15.5 Emitter 6 Two, M3 Vinyl-insulated round cable with three conductors, 4 dia. (0.2 mm2 with 1.1-dia. insulator); standard length: 2 m Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 1 4 3 Mounting Brackets E39-L104 E39-L43 E39-L44 Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 7 E39-L144 E39-L142 E39-L98 8 Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K E39-L93FH E39-L93FV Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 9 E39-L93H E39-L93V 10 Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K E39-L93XY Precautions Be sure to abide by the following precautions for the safe operation of the Sensor. Connections Wiring M8 Metal Connector Do not short-circuit the load, otherwise the Sensor may be damaged. * Be sure to connect or disconnect the metal connector after turning OFF the Sensor. * Hold the connector cover to connect or disconnect the metal connector. * Secure the connector cover by hand. Do not use any pliers, otherwise the connector may be damaged. * The proper tightening torque range is between 0.3 and 0.4 N * m. Be sure to tighten the connector securely, otherwise the specified degree of protection may not be maintained or the connector may be disconnected due to vibration. Wiring Mistakes Mounting Do not make mistakes in wiring, such as mistakes in polarity, otherwise the Sensor may be damaged. Sensor Mounting Connection without Load Use M3 screws to mount the sensor and tighten each screw to a maximum torque of 0.5 N * m. Power Supply Voltage Make sure that the power supply to the Sensor is within the rated voltage range and do not apply 100 VAC or more if the Sensor is a DC model, or otherwise the Sensor may explode or burn. Load Short-circuiting Do not connect power supply to the Sensor with no load connected, otherwise the internal elements may explode or burn. Operating Environment Do not use the Sensor in locations with explosive or flammable gas. Precautions for Safe Use E3Z-@@@ E39-L104 Mounting Bracket (sold separately) Settings Power Reset Time The Sensor is ready to operate 100 ms after the Sensor is turned ON. If the load and Sensor are connected to independent power supplies respectively, be sure to turn ON the Sensor before turning the load ON. Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 11 Precautions for Safe Use Sensors The sensor has a special coating that makes it more oil resistant. Handle it with care to avoid scratching the coating. If you attach adhesive tape to the sensor, the coating may be damaged when you remove the tape. Part of the coating around the adjuster may peel off when you adjust the sensitivity. This does not reduce the oil resistance of the sensor. Cables Part of the cable is coated and may wrinkle when bent. Observe the following precautions when handling the cable because it is made of the same polyvinyl chloride (PVC) material as the cables for standard E3Z sensors. * Keep the cable from direct contact with oil. If the cable is used in oily environments, provide a cover or other protective measure to keep the cable from direct contact with oil. * Do not subject the cable to mechanical movements in oily environments. The sheath will lose its elasticity and harden over time. The cable may break as a result and cause faulty operation, or there may be damage to the sheath that leads to a short circuit. Lens The oil-resistant treatment on the lens may cause slight blurring, but this does not affect detection. 12 Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K Certain Terms and Conditions of Sale 1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed part of all catalogs, manuals or other documents, whether electronic or in writing, relating to the sale of goods or services (collectively, the "Goods") by Omron Electronics LLC and its subsidiary companies ("Seller"). Seller hereby objects to any terms or conditions proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. Please contact your Omron representative to confirm any additional terms for sales from your Omron company. 2. Prices. All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at time of shipment. 3. Discounts. Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (i) the invoice is paid according to Seller's payment terms and (ii) Buyer has no past due amounts owing to Seller. 4. Orders. Seller will accept no order less than $200 net billing. 5. Governmental Approvals. Buyer shall be responsible for, and shall bear all costs involved in, obtaining any government approvals required for the importation or sale of the Goods. 6. Taxes. All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Goods sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 7. Financial. If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Goods sold hereunder and stop any Goods in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 9. Force Majeure. Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller: a. Shipments shall be by a carrier selected by Seller; b. Such carrier shall act as the agent of Buyer and delivery to such carrier shall constitute delivery to Buyer; c. All sales and shipments of Goods shall be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Goods shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Goods until the full purchase price is paid by Buyer; d. Delivery and shipping dates are estimates only. e. Seller will package Goods as it deems proper for protection against normal handling and extra charges apply to special conditions. 11. Claims. Any claim by Buyer against Seller for shortage or damage to the Goods occurring before delivery to the carrier must be presented in writing to Seller within 30 days of receipt of shipment and include the original transportation bill signed by the carrier noting that the carrier received the Goods from Seller in the condition claimed. 12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that the Goods will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). Seller disclaims all other warranties, express or implied. (b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Seller further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Goods or otherwise of any intellectual property right. (c) Buyer Remedy. Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the noncomplying Good or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Good; provided that in no event shall Seller be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Goods unless Seller's analysis confirms that the Goods were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any goods by Buyer must be approved in writing by Seller before shipment. Seller shall not be liable for the suitability or unsuitability or the results from the use of Goods in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. 13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Seller exceed the individual price of the Good on which liability is asserted. 14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Goods. Without limiting the foregoing, Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Good made to Buyer specifications infringed intellectual property rights of another party. 15. Property; Confidentiality. The intellectual property embodied in the Goods is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Goods are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunder without Seller's written consent. (c) Amendment. These Terms constitute the entire agreement between Buyer and Seller relating to the Goods, and no provision may be changed or waived unless in writing signed by the parties. (d) Severability. If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. (e) Setoff. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. (f) As used herein, "including" means "including without limitation". Certain Precautions on Specifications and Use 1. Suitability of Use. Seller shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Good in the Buyer's application or use of the Good. At Buyer's request, Seller will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Good. This information by itself is not sufficient for a complete determination of the suitability of the Good in combination with the end product, machine, system, or other application or use. The following are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible uses of this Good, nor is it intended to imply that the uses listed may be suitable for this Good: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this Good. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products. Seller shall not be responsible for the user's pro gramming of a programmable Good, or any consequence thereof. 3. Performance Data. Performance data given in this catalog is provided as a guide for the user in determining suitability and does not constitute a warranty It may represent the result of Seller's test conditions, and the user must corre late it to actual application requirements. Actual performance is subject to the Seller's Warranty and Limitations of Liability. 4. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our prac tice to change part numbers when published ratings or features are changed or when significant construction changes are made. However, some specifica tions of the Good may be changed without any notice. When in doubt, specia part numbers may be assigned to fix or establish key specifications for you application. Please consult with your Seller's representative at any time to confirm actual specifications of purchased Good. 5. Errors and Omissions. The information in this catalog has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 13 Complete "Terms and Conditions of Sale" for product purchase and use are on Omron's website at www.omron.com/oei - under the "About Us" tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. OMRON ELECTRONICS LLC OMRON CANADA, INC. OMRON ON-LINE One Commerce Drive Schaumburg, IL 60173 885 Milner Avenue Toronto, Ontario M1B 5V8 847-843-7900 416-286-6465 Global - http://www.omron.com USA - http://www.omron.com/oei Canada - http://www.omron.ca For US technical support or other inquiries: 800-556-6766 Cat. No. E343-E3-01 14 2/04 Specifications subject to change without notice Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K Printed in USA