3KRWRHOHFWULF6HQVRUZLWK%XLOWLQ$PSOLILHU2LO5HVLVWDQW(=.
3KRWRHOHFWULF6HQVRUZLWK%XLOWLQ$PSOLILHU2LOUHVLVWDQW0RGHOV
(=.
/LQHXSLQFOXGHVRLOUHVLVWDQWPRGHOVWKDW
HQDEOHVWDEOHVHQVLQJLQHQYLURQPHQWV
VXEMHFWWRRLOPLVW
6SHFLDOFRDWLQJUHVLVWVHIIHFWVRIKDUVKHQYLURQPHQWV
,336,ZDVKGRZQUDWHG
+LJKQRLVHLPPXQLW\
6HOHFWSUHZLUHGRUSLJWDLOFRQQHFWRUPRGHOV
2UGHULQJ,QIRUPDWLRQ
■/LVWRI0RGHOV
6WRFN1RWH6KDGHGPRGHOVDUHQRUPDOO\VWRFNHG
1RWH 7KHUHIOHFWRULVVROGVHSDUDWHO\6HOHFWWKHUHIOHFWRUPRGHOPRVWVXLWHGWRWKHDSSOLFDWLRQ
7KHVHQVLQJGLVWDQFHVSHFLILHGLVSRVVLEOHZKHQWKH(56LVXVHG)LJXUHLQSDUHQWKHVLVLQGLFDWHWKHPLQLPXPUHTXLUHGGLVWDQFHEH
WZHHQWKHVHQVRUDQGWKHUHIOHFWRU
8VH2PURQVWDQGDUG;6)FRQQHFWRUVHWVWRPDWHZLWK0SLJWDLOFRQQHFWRUYHUVLRQ
6HQVLQJPHWKRG $SSHDUDQFH &RQQHFWLRQPHWKRG 6HQVLQJGLVWDQFH 0RGHO
131RXWSXW 313RXWSXW
7KURXJKEHDP 3UHZLUHGP (=7. (=7.
3UHZLUHG0SLQ
FRQQHFWRUP
(=7.0- (=7.0-
5HWURUHIOHFWLYH
3RODUL]HG
3UHZLUHGP (=5. (=5.
3UHZLUHG0SLQ
FRQQHFWRUP
(=5.0- (=5.0-
'LIIXVHUHIOHFWLYH 3UHZLUHGP (='. (='.
3UHZLUHG0SLQ
FRQQHFWRUP
(='.0- (='.0-
3UHZLUHGP (='. (='.
3UHZLUHG0SLQ
FRQQHFWRUP
(='.0- (='.0-
,QIUDUHG%HDP
9LVLEOH%HDP
5 to 100 mm (wide view)
,QIUDUHG%HDP
,QIUDUHG%HDP
2Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K
Reflectors for Retroreflective Models
Stock Note: Shaded models are normally stocked.
Note: The actual sensing distance may be reduced to approximately 70% of the typical sensing distance when using a reflector other than the E39-
R1 or the E39-R1S.
Mounting Brackets
Stock Note: Shaded models are normally stocked.
Name Sensing distance (typical) Model
Reflector 100 mm to 2 m E39-R1
100 mm to 3 m E39-R1S
100 mm to 5 m E39-R2
100 mm to 2.5 m E39-R9
100 mm to 3.5 m E39-R10
Miniature reflector 50 mm to 1.5 m E39-R3
Tape reflector 150 mm to 700 mm E39-RS1
150 mm to 1.1 m E39-RS2
150 mm to 1.4 m E39-RS3
Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 3
Specifications
■Ratings/Characteristics
* Figures in parentheses indicate the minimum required distances between the sensors and reflectors.
Sensing method Through-beam Retroreflective
(Polarized)
Diffuse-reflective
Model NPN output E3Z-T61K (-M3J) E3Z-R16K (-M3J) E3Z-D61K (-M3J) E3Z-D62K (-M3J)
Item PNP output E3Z-T81K (-M3J) E3Z-R81K (-M3J) E3Z-D81K (-M3J) E3Z-D82K (-M3J)
Sensing distance 15 m 3 m (100 mm)*
(when using E39-R1S)
2 m (100 mm)*
(when using E39-R1)
White paper
(100 × 100 mm):
100 mm
White paper
(300 × 300 mm): 1 m
Standard sensing object Opaque:12 mm dia. min. Opaque: 75 mm dia. min. ---
Hysteresis --- 20% max. of sensing distance
Directional angle Both emitter and receiver:
3° to 15°
2° to 10°---
Light source (wave length) Infrared LED (870 nm) Red LED (660 nm) Infrared LED (860 nm)
Power supply voltage 12 to 24 VDC±10% including 10% (p-p) max. ripple
Current consumption Emitter: 15 mA
Receiver: 20 mA
30 mA max.
Control output Load power supply voltage: 26.4 VDC max.
Load current: 100 mA max.
(Residual voltage: 1 V max. for a load currents less than 10 mA. and 2 V max. for load currents between
10 mA and 100 mA)
Open collector output (NPN or PNP depending on model)
L-ON/D-ON selectable
Circuit protection Protection from reversed
power supply connection,
output short-circuit, and re-
versed output connection
Protection from reversed power supply connection, output short-circuit, mutual
interference, and reversed output connection
Response time Operation or reset: 1 ms max.
Sensitivity adjustment One-turn adjuster
Ambient illumination
(receiver side)
Incandescent lamp: 3,000 &x max.
Sunlight: 10,000 &x max.
Ambient temperature Operating: −25°C to 55°C/Storage: −40°C to 70°C (with no icing or condensation)
Ambient humidity Operating: 35% to 85%/Storage: 35% to 95% (with no condensation)
Insulation resistance 20 MΩ min. at 500 VDC between charged parts and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between charged parts and case
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude or 300 m/s2 for 2 hours each in X, Y, and Z directions
Shock resistance Destruction: 500 m/s2 3 times each in X, Y, and Z directions
Degree of protection IEC60529: IP67
Connection method Pre-wired cable (standard length: 2 m) or Pre-wired M8 4-pin connector (standard length: 0.3 m)
Indicator Operation indicator (orange)
Stability indicator (green)
Emitter has power indicator (orange) only.
Weight
(packed
state)
Pre-wired cable Approx. 120 g Approx. 65 g
Pre-wired M8 4-pin
connector
Approx. 50 g Approx. 30 g
Material Case PBT (polybutylene terephthalate)
Lens Denatured polyarylate
Accessories Instruction manual (The Mounting Bracket is not provided with any of the above models.)
4Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K
Oil Resistance
•Although the E3Z-###K Sensors have oil-resistant specifications,
performance may be affected by certain types of oil. Refer to the
table on the right.
•E3Z-###K Sensors are tested for resistance to the oils given in
the table on the right. Refer to the information in the table when
deciding which type of oil to use.
Note 1. The E3Z-###K maintained a minimum insulation resistance
of 100 MΩ after the sensors were dripped in all the above oils
for 240 hours.
2. When using the Sensors in environments subject to oils other
than those listed above, use the figures for kinetic viscosity
and pH as rough guides. Consideration of the effects of addi-
tives in the oil may also be required.
3. JIS: Japanese Industrial Standards
Output Circuit Diagram
■NPN Output
Testing oil
classification
JIS classifi-
cation
Product
name
Dynamic viscosity
(mm2/s) at 40 °C
pH
Lubricant --- Velocity
No. 3 2.02 ---
Water insolu-
ble coolant Class 2, No.5 Daphne Cut
AS-30D No less than 10 to
less than 50
Class 2,
No.11 Yushiron
Oil No. 2 ac Less than 10
Water soluble
coolant Class W1,
No. 1 Yushiroken
EC50T-3 --- 7 to 9.5
Yushiron
Lubic
HWC68
7 to 9.9
Class W1,
No. 2
Gryton
1700D
7 to 9.2
Class W2 ,
No. 1
Yushiroken
S50N
7 to 9.8
Model Operating
mode
Timing chart Mode selector Output circuit
E3Z-T61K (-M3J)
E3Z-R61K (-M3J)
E3Z-D61K (-M3J)
E3Z-D62K (-M3J)
Light ON L (Light ON)
Dark ON D (Dark ON)
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between brown and black)
Output
transistor
Load
(relay)
(Through-beam receiver) (Retroreflective model) (Diffuse-reflective model)
Connector Pin Arrangement
Pin 2 is not used.
4
1
24
3
3
1
12 to 24 VDC
Brown
Black
(Control output)
Blue
100 mA
max.
Operation
indicator
Stability
indicator
(Green)(Orange)
0 V
Z
D
Load
(Relay)
Main
circuit
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between brown and black)
Output
transistor
Load
(relay)
(Through-beam emitter)
Connector Pin Arrangement
Pins 2 and 4 are not used.
1
24
3
3
1
12 to 24 VDC
Power
indicator
(orange)
Main
circuit
Brown
Blue
Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 5
■PNP Output
Structure of Sensor I/O Connector
Note:Pin 2 is not used.
Model Operating
mode
Timing chart Mode selector Output circuit
E3Z-T81K (-M3J)
E3Z-R81K (-M3J)
E3Z-D81K (-M3J)
E3Z-D82K (-M3J)
Light-ON L (Light ON)
Dark ON D (Dark ON)
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between blue and black)
Output
transistor
Load
(relay)
(Through-beam receiver) (Retroreflective model) (Diffuse-reflective model)
Connector Pin Arrangement
Pin 2 is not used.
4
1
24
3
1
3
12 to 24 VDC
Brown
Black
Blue
100 mA
max.
(Control output)
Operation
indicator
Stability
indicator
(Green)
(Orange)
0 V
ZD
Load
(Relay)
Main
circuit
Incident light
No incident light
ON
OFF
ON
OFF
Operate
Reset
Operation
indicator
(orange)
(Between blue and black)
Output
transistor
Load
(relay)
(Through-beam emitter)
Connector Pin Arrangement
Pins 2 and 4 are not used.
1
24
3
3
1
12 to 24 VDC
Power
indicator
(orange)
Main
circuit
Brown
Blue
Classification Wire color Connector
pin No.
Use
DC Brown APower supply (+V)
White B---
Blue CPower supply (0 V)
Black DOutput
2
4
1
3
1
2
3
4
Brown
White
Blue
Black
Wire colors
XS3F-M421-402-A
XS3F-M421-405-A
XS3F-M422-402-A
XS3F-M422-405-A
6Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K
Dimensions
Units: mm (inch)
■Sensor
Through-beam
E3Z-T61K (-M3J)
E3Z-T81K (-M3J)
Retroreflective Models
E3Z-R61K (-M3J)
E3Z-R81K (-M3J)
Diffuse-reflective Models
E3Z-D61K (-M3J)
E3Z-D62K (-M3J)
E3Z-D81K (-M3J)
E3Z-D82K (-M3J)
20 8
17
2.1
25.4
Vinyl-insulated round cable with two
conductors, 4 dia. (0.2 mm2 with
1.1-dia. insulator); standard length: 2 m
Two, M3
31
15.5
Optical axis
11
18
10.410.8
Power indicator (orange)
Lens
7.2
Emitter
Connector Models
(E3Z-T@1K-M3J)
Pre-wired Models
Terminal Specifications
1+V
2 ---
30 V
4 ---
Terminals 2 and 4 are not used.
Vinyl-insulated round cable
4 dia.; standard length: 0.3 m
3
4
2
1
M8
Stability indicator
(green) Sensing adjuster
Operation selector
Receiver
Terminal Specifications
1+V
2 ---
30 V
4 Output
Terminal 2 is not used.
Vinyl-insulated round cable
4 dia.; standard length: 0.3 m
3
4
2
1
M8
Optical axis
Operation indicator (orange)
Lens
Connector Models
(E3Z-T@1K-M3J)
Pre-wired Models
17
2.1
25.4
Two, M3
31
15.5
11
18
20
12.45
8.8
3.2
10.410.8
4.3
7.2
Vinyl-insulated round cable with three
conductors, 4 dia. (0.2 mm2 with
1.1-dia. insulator
)
; standard len
g
th: 2 m
20
12.45
8.8
3.2
Stability indicator (green)
Operation indicator (orange)
17
2.1
25.4
Two, M3
31
15.5
Two, 7-dia.
lenses
Receiver
Optical axis
Emitter
4
18 4
10.410.8
4.3
Sensing adjuster
Operation selector
Pre-wired Models
Connector Models
(E3Z-D@@K-M3J)
(E3Z-R@@K-M3J) Terminal Specifications
1+V
2 ---
30 V
4 Output
Terminal 2 is not used.
Vinyl-insulated round cable
4 dia.; standard length: 0.3 m
M8
3
4
2
1
Vinyl-insulated round cable with three
conductors, 4 dia. (0.2 mm2 with
1.1-dia. insulator); standard length: 2 m
Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 7
■Mounting Brackets
E39-L104
E39-L43
E39-L44
8Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K
E39-L144
E39-L142
E39-L98
Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 9
E39-L93FH
E39-L93FV
10 Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K
E39-L93H
E39-L93V
Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 11
E39-L93XY
Precautions
Be sure to abide by the following precautions for the safe operation
of the Sensor.
■Wiring
Power Supply Voltage
Make sure that the power supply to the Sensor is within the rated
voltage range and do not apply 100 VAC or more if the Sensor is a
DC model, or otherwise the Sensor may explode or burn.
Load Short-circuiting
Do not short-circuit the load, otherwise the Sensor may be damaged.
Wiring Mistakes
Do not make mistakes in wiring, such as mistakes in polarity, other-
wise the Sensor may be damaged.
Connection without Load
Do not connect power supply to the Sensor with no load connected,
otherwise the internal elements may explode or burn.
Operating Environment
Do not use the Sensor in locations with explosive or flammable gas.
■Precautions for Safe Use
Settings
Power Reset Time
The Sensor is ready to operate 100 ms after the Sensor is turned
ON. If the load and Sensor are connected to independent power sup-
plies respectively, be sure to turn ON the Sensor before turning the
load ON.
Connections
M8 Metal Connector
•Be sure to connect or disconnect the metal connector after turning
OFF the Sensor.
•Hold the connector cover to connect or disconnect the metal con-
nector.
•Secure the connector cover by hand. Do not use any pliers, other-
wise the connector may be damaged.
•The proper tightening torque range is between 0.3 and 0.4 N • m.
Be sure to tighten the connector securely, otherwise the specified
degree of protection may not be maintained or the connector may
be disconnected due to vibration.
Mounting
Sensor Mounting
Use M3 screws to mount the sensor and tighten each screw to a
maximum torque of 0.5 N • m.
E3Z-@@@ E39-L104 Mounting Bracket
(sold separately)
12 Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K
■Precautions for Safe Use
Sensors
The sensor has a special coating that makes it more oil resistant.
Handle it with care to avoid scratching the coating.
If you attach adhesive tape to the sensor, the coating may be dam-
aged when you remove the tape.
Part of the coating around the adjuster may peel off when you adjust
the sensitivity. This does not reduce the oil resistance of the sensor.
Cables
Part of the cable is coated and may wrinkle when bent.
Observe the following precautions when handling the cable because
it is made of the same polyvinyl chloride (PVC) material as the cables
for standard E3Z sensors.
•Keep the cable from direct contact with oil.
If the cable is used in oily environments, provide a cover or other
protective measure to keep the cable from direct contact with oil.
•Do not subject the cable to mechanical movements in oily environ-
ments.
The sheath will lose its elasticity and harden over time. The cable
may break as a result and cause faulty operation, or there may be
damage to the sheath that leads to a short circuit.
Lens
The oil-resistant treatment on the lens may cause slight blurring, but
this does not affect detection.
Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K 13
Certain Terms and Conditions of Sale
1. Offer; Acceptance. These terms and conditions (these "Terms") are deemed
part of all catalogs, manuals or other documents, whether electronic or in writ-
ing, relating to the sale of goods or services (collectively, the "Goods") by
Omron Electronics LLC and its subsidiary companies ("Seller"). Seller hereby
objects to any terms or conditions proposed in Buyer's purchase order or other
documents which are inconsistent with, or in addition to, these Terms. Please
contact your Omron representative to confirm any additional terms for sales
from your Omron company.
2. Prices. All prices stated are current, subject to change without notice by
Seller. Buyer agrees to pay the price in effect at time of shipment.
3. Discounts. Cash discounts, if any, will apply only on the net amount of
invoices sent to Buyer after deducting transportation charges, taxes and
duties, and will be allowed only if (i) the invoice is paid according to Seller's
payment terms and (ii) Buyer has no past due amounts owing to Seller.
4. Orders. Seller will accept no order less than $200 net billing.
5. Governmental Approvals. Buyer shall be responsible for, and shall bear all
costs involved in, obtaining any government approvals required for the impor-
tation or sale of the Goods.
6. Taxes. All taxes, duties and other governmental charges (other than general
real property and income taxes), including any interest or penalties thereon,
imposed directly or indirectly on Seller or required to be collected directly or
indirectly by Seller for the manufacture, production, sale, delivery, importation,
consumption or use of the Goods sold hereunder (including customs duties
and sales, excise, use, turnover and license taxes) shall be charged to and
remitted by Buyer to Seller.
7. Financial. If the financial position of Buyer at any time becomes unsatisfactory
to Seller, Seller reserves the right to stop shipments or require satisfactory
security or payment in advance. If Buyer fails to make payment or otherwise
comply with these Terms or any related agreement, Seller may (without liability
and in addition to other remedies) cancel any unshipped portion of Goods sold
hereunder and stop any Goods in transit until Buyer pays all amounts, includ-
ing amounts payable hereunder, whether or not then due, which are owing to it
by Buyer. Buyer shall in any event remain liable for all unpaid accounts.
8. Cancellation; Etc. Orders are not subject to rescheduling or cancellation
unless Buyer indemnifies Seller fully against all costs or expenses arising in
connection therewith.
9. Force Majeure. Seller shall not be liable for any delay or failure in delivery
resulting from causes beyond its control, including earthquakes, fires, floods,
strikes or other labor disputes, shortage of labor or materials, accidents to
machinery, acts of sabotage, riots, delay in or lack of transportation or the
requirements of any government authority.
10. Shipping; Delivery. Unless otherwise expressly agreed in writing by Seller:
a. Shipments shall be by a carrier selected by Seller;
b. Such carrier shall act as the agent of Buyer and delivery to such carrier
shall constitute delivery to Buyer;
c. All sales and shipments of Goods shall be FOB shipping point (unless oth-
erwise stated in writing by Seller), at which point title to and all risk of loss of
the Goods shall pass from Seller to Buyer, provided that Seller shall retain a
security interest in the Goods until the full purchase price is paid by Buyer;
d. Delivery and shipping dates are estimates only.
e. Seller will package Goods as it deems proper for protection against normal
handling and extra charges apply to special conditions.
11. Claims. Any claim by Buyer against Seller for shortage or damage to the
Goods occurring before delivery to the carrier must be presented in writing to
Seller within 30 days of receipt of shipment and include the original transporta-
tion bill signed by the carrier noting that the carrier received the Goods from
Seller in the condition claimed.
12. Warranties. (a) Exclusive Warranty. Seller's exclusive warranty is that th
e
Goods will be free from defects in materials and workmanship for a period o
f
twelve months from the date of sale by Seller (or such other period expresse
d
in writing by Seller). Seller disclaims all other warranties, express or implied
.
(b) Limitations. SELLER MAKES NO WARRANTY OR REPRESENTATION
,
EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABIL
-
ITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE GOODS
.
BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT TH
E
GOODS WILL SUITABLY MEET THE REQUIREMENTS OF THEI
R
INTENDED USE. Seller further disclaims all warranties and responsibility o
f
any type for claims or expenses based on infringement by the Goods or other
-
wise of any intellectual property right. (c) Buyer Remedy. Seller's sole obliga
-
tion hereunder shall be to replace (in the form originally shipped with Buye
r
responsible for labor charges for removal or replacement thereof) the non
-
complying Good or, at Seller's election, to repay or credit Buyer an amoun
t
equal to the purchase price of the Good; provided that in no event shall Selle
r
be responsible for warranty, repair, indemnity or any other claims or expense
s
regarding the Goods unless Seller's analysis confirms that the Goods wer
e
properly handled, stored, installed and maintained and not subject to contami
-
nation, abuse, misuse or inappropriate modification. Return of any goods b
y
Buyer must be approved in writing by Seller before shipment. Seller shall no
t
be liable for the suitability or unsuitability or the results from the use of Good
s
in combination with any electrical or electronic components, circuits, syste
m
assemblies or any other materials or substances or environments. An
y
advice, recommendations or information given orally or in writing, are not to b
e
construed as an amendment or addition to the above warranty.
13. Damage Limits; Etc. SELLER SHALL NOT BE LIABLE FOR SPECIAL, INDI
-
RECT OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRO
-
DUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH TH
E
GOODS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANT
Y,
NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability o
f
Seller exceed the individual price of the Good on which liability is asserted.
14. Indemnities. Buyer shall indemnify and hold harmless Seller, its affiliates an
d
its employees from and against all liabilities, losses, claims, costs an
d
expenses (including attorney's fees and expenses) related to any claim, inves
-
tigation, litigation or proceeding (whether or not Seller is a party) which arise
s
or is alleged to arise from Buyer's acts or omissions under these Terms or i
n
any way with respect to the Goods. Without limiting the foregoing, Buyer (a
t
its own expense) shall indemnify and hold harmless Seller and defend or settl
e
any action brought against Seller to the extent that it is based on a claim tha
t
any Good made to Buyer specifications infringed intellectual property rights o
f
another party.
15. Property; Confidentiality. The intellectual property embodied in the Goods i
s
the exclusive property of Seller and its affiliates and Buyer shall not attempt t
o
duplicate it in any way without the written permission of Seller. Notwithstand
-
ing any charges to Buyer for engineering or tooling, all engineering and toolin
g
shall remain the exclusive property of Seller. All information and material
s
supplied by Seller to Buyer relating to the Goods are confidential and propri
-
etary, and Buyer shall limit distribution thereof to its trusted employees an
d
strictly prevent disclosure to any third party.
16. Miscellaneous. (a) Waiver. No failure or delay by Seller in exercising any righ
t
and no course of dealing between Buyer and Seller shall operate as a waive
r
of rights by Seller. (b) Assignment. Buyer may not assign its rights hereunde
r
without Seller's written consent. (c) Amendment. These Terms constitute th
e
entire agreement between Buyer and Seller relating to the Goods, and no pro
-
vision may be changed or waived unless in writing signed by the parties.
(d) Severability. If any provision hereof is rendered ineffective or invalid, suc
h
provision shall not invalidate any other provision. (e) Setoff. Buyer shall hav
e
no right to set off any amounts against the amount owing in respect of thi
s
invoice. (f) As used herein, "including" means "including without limitation".
Certain Precautions on Specifications and Use
1. Suitability of Use. Seller shall not be responsible for conformity with any stan-
dards, codes or regulations which apply to the combination of the Good in the
Buyer's application or use of the Good. At Buyer's request, Seller will provide
applicable third party certification documents identifying ratings and limitations
of use which apply to the Good. This information by itself is not sufficient for a
complete determination of the suitability of the Good in combination with the
end product, machine, system, or other application or use. The following are
some examples of applications for which particular attention must be given.
This is not intended to be an exhaustive list of all possible uses of this Good,
nor is it intended to imply that the uses listed may be suitable for this Good:
(i) Outdoor use, uses involving potential chemical contamination or electrical
interference, or conditions or uses not described in this document.
(ii) Energy control systems, combustion systems, railroad systems, aviation
systems, medical equipment, amusement machines, vehicles, safety
equipment, and installations subject to separate industry or government
regulations.
(iii) Systems, machines and equipment that could present a risk to life or
property. Please know and observe all prohibitions of use applicable to
this Good.
NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS
RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM
AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT
THE SELLER'S PRODUCT IS PROPERLY RATED AND INSTALLED FOR
THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM.
2. Programmable Products. Seller shall not be responsible for the user's pro
gramming of a programmable Good, or any consequence thereof.
3. Performance Data. Performance data given in this catalog is provided as
a
guide for the user in determining suitability and does not constitute a warrant
y
It may represent the result of Seller's test conditions, and the user must corre
late it to actual application requirements. Actual performance is subject to th
e
Seller's Warranty and Limitations of Liability.
4. Change in Specifications. Product specifications and accessories may b
e
changed at any time based on improvements and other reasons. It is our pra
c
tice to change part numbers when published ratings or features are change
d
or when significant construction changes are made. However, some specific
a
tions of the Good may be changed without any notice. When in doubt, speci
a
part numbers may be assigned to fix or establish key specifications for you
application. Please consult with your Seller's representative at any time t
o
confirm actual specifications of purchased Good.
5. Errors and Omissions. The information in this catalog has been carefull
y
checked and is believed to be accurate; however, no responsibility is assume
d
for clerical, typographical or proofreading errors, or omissions.
14 Photoelectric Sensor with Built-in Amplifier (Oil Resistant) E3Z-K
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.omron.com/oei
Canada - http://www.omron.ca
Cat. No. E343-E3-01 Printed in USA
OMRON CANADA, INC.
885 Milner Avenue
Toronto, Ontario M1B 5V8
416-286-6465
OMRON ELECTRONICS LLC
One Commerce Drive
Schaumburg, IL 60173
847-843-7900
For US technical support or other inquiries:
800-556-6766
2/04 Specifications subject to change without notice
Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website
at www.omron.com/oei – under the “About Us” tab, in the Legal Matters section.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
