DATA SHEET MINIATURE SIGNAL RELAY UC2/UD2 SERIES RoHS Compliant SUPER-COMPACT SIZE, FLAT-PACKAGE DESCRIPTION NEXEM UC2/UD2 relay is a new generation miniature signal relay, super-compact and slim. FEATURES Small mounting size of flat package for dense mounting Telcordia (2500 V) and FCC (1500 V) surge capacity IEC60950/UL1950/EN60950 spacing and high breakdown voltage (Basic insulation class on 200 V working voltage) Low power consumption (100-140 mW) APPLICATIONS Electronic switching systems, PBX, Terminal equipment, Telephone system For Right Use of Miniature Relays DO NOT EXCEED MAXIMUM RATINGS. Do not use relays under exceeding conditions such as over ambient temperature, over voltage and over current. Incorrect use could result in abnormal heating, damage to related parts or cause burning. READ CAUTIONS IN THE SELECTION GUIDE. Read the cautions described in EM Devices' your application. "Miniature Relays" when you choose relays for The information in this document is subject to change without notice. (c) EM Devices Corporation 2017 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES DIMENSIONS AND PAD LAYOUTS UC2 SERIES Unit: mm (inch) (mm) 6.5 (0.256) 10.6 (0.417) (1.5) (1.5) 7.6 3.2 2.2 2.2 8-0.85 5.3 (0.209) 5.08 3.4 (0.134) [1.5] 3.2 (0.126) 2.2 2.2 (0.087) (0.087) [1.5] 5.08 (0.2) neral tolerance tolerance ::0.1 NOTE . Ge General 0.1 (Bottom view) Tolerance of lead pitch is 0.15mm (0.006inch) Other tolerances 0.3mm (0.012inch) Lead size 0.4x0.2 0.1 NJ type: Lead length 2.8mm UD2 SERIES STANDARD (mm) 6.5 (0.256) 10.6 (0.417) 7.6 (1.5) 3.2 (1.5) 2.2 2.2 5.45 max. (0.215) 0.2 [1.5] 3.2 (0.126) 2.2 2.2 (0.087) (0.087) [1.5] Tolerance of lead pitch is 0.15mm (0.006inch) Other tolerances 0.3mm (0.012inch) 6.74 5.08 (0.2) 2.66 8.4 (0.331) 0.8 Lead size 0.4x0.2 0.1 NOTE. General tolerance : 0.1 (Top view) MINIMUM FOOTPRINT TYPE (mm) 6.5 (0.256) 10.6 (0.417) 7.6 (1.5) 3.2 (1.5) 2.2 6.0 max. (0.236) 0 0. [1.5] 2.2 3.2 (0.126) 2.2 2.2 (0.087) (0.087) [1.5] Tolerance of lead pitch is 0.15mm (0.006inch) Other tolerances 0.3mm (0.012inch) 5.94 5.08 (0.2) 1.86 6.8 (0.268) Lead size 0.4x0.2 0.1 0.8 NOTE. General tolerance : 0.1 (Top view) 2 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES PIN CONFIGURATIONS (Bottom view) Direction mark Direction mark 1 2 3 4 1 2 3 4 8 7 6 5 +- + SR - + 8 7 6 5 Non-latch type (Not energized position) S: Coil polarity for Set R: Coil polarity for Reset Single coil latch type (Reset position) MARKINGS (top view) (3) (2) JAPAN UD2-4.5NU (1) Part number (2) Manufacturer (3) Country of origin (4) Date code (5) Direction mark (pin No. 1 and 8) 0501F (5) (4) (1) 3 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES GENERAL SPECIFICATIONS Contact Form 2 Form C Contact Material Silver alloy with gold alloy overlay Contact Ratings Maximum Switching Power 30 W, 37.5 VA Maximum Switching Voltage 220 VDC, 250 VAC Maximum Switching Current 1A Maximum Carrying Current 1A Minimum Contact Ratings 10 m VDC, 10A *1 Initial Contact Resistance 100 m max. (initial) Operate Time (Excluding bounce) Approx. 2 ms Release Time (Excluding bounce) Approx. 1 ms Insulation Resistance 1000 M at 500 VDC Withstanding Voltage Between open contacts Between adjacent contacts Between coil and contacts 1000 VAC (for one minute) 1500 V surge (10x160 s *2) 1000 VAC (for one minute) 1500 V surge (10x160 s *2) 1500 VAC (for one minute) , 2500 V surge (2x10 s *3) Shock Resistance 735 m/s2 (75G) (misoperation) 2 980 m/s (100G) (destructive failure) Vibration Resistance 10 to 55 Hz, double amplitude 3 mm(20G) (misoperation) 10 to 55 Hz, double amplitude 5 mm(30G) (destructive failure) -40 to +85 C Ambient Temperature -40 to +70 C (Low power consumption type) Coil Temperature Rise Non-load Running Specifications Load Weight 18 C at nominal coil voltage (140mW) 5x107 operations (Non-latch type) *4 7 1x10 operations (Latch type) 30 VDC 1A (resistive), 1x105 operations at 20C,1Hz 125 VAC 0.3A (resistive), 1x105 operations at 20C,1Hz Approx. 0.8 g * 1 This value is a reference value in the resistance load. Minimum capacity changes depending on switching frequency and environment temperature and the load. * 2 rise time: 10 s, decay time to half crest: 160 s * 3 rise time: 2 s, decay time to half crest: 10 s 7 * 4 This shows the number of operations with fatal defects. Stable characteristics are maintained for 1x10 operations. 4 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES COIL SPECIFICATIONS Non-latch Type Nominal Coil Voltage (VDC) Coil Resistance ()10% Must Operate Voltage* (VDC) Must Release Voltage* (VDC) at 20C Nominal Operating Power (mW) 3 64.3 2.25 0.3 140 4.5 145 3.38 0.45 140 5 178 3.75 0.5 140 9 579 6.75 0.9 140 12 1028 9.0 1.2 140 Set Voltage* (VDC) Reset Voltage* (VDC) at 20C Nominal Operating Power (mW) Single Coil Latch Type Nominal Coil Coil Voltage Resistance (VDC) ()10% 3 90 2.25 2.25 100 4.5 202.5 3.38 3.38 100 5 250 3.75 3.75 100 9 810 6.75 6.75 100 9.0 100 at 20C Nominal Operating Power (mW) 12 1440 9.0 Non-latch Low Power Consumption Type Nominal Coil Must Operate Coil Voltage Resistance Voltage* (VDC) ()10% (VDC) Must Release Voltage* (VDC) 3 90 2.4 0.3 100 4.5 202.5 3.6 0.45 100 5 250 4.0 0.5 100 Note * Test by pulse voltage SAFETY STANDARD AND RATING UL Recognized (UL508)* File No E73266 30 VDC, 1 A (Resistive) 110 VDC, 0.3 A (Resistive) 125 VAC, 0.5 A (Resistive) * Spacing: UL840, TUV Certificate (EN61810) CSA Certificated (CSA C22.2 No14)** File No LR46266 No. 2050596 Creepage and clearance of coil to contact is more than 2 mm. (According to EN60950) Basic insulation class **Spacing :CSA std950 RECOMMENDED RELAY DRIVE CONDITIONS Drive under conditions. If it is impossible, please inquire to EM Devices. Non-latch type Non-latch type Voltage: within 5% of nominal voltage (Low power consumption Type) Single coil latch type Square pulse (rise and fall time is rapidly) pulse height : within 5% of nominal voltage pulse width : more than 10 ms Ambient temperature - 40 to +85 C Ambient temperature - 40 to +70 C Ambient temperature - 40 to +85 C 5 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES PART NUMBER SYSTEM UC2-3SNU NU: Standard NJ: Trimmed lead type NE: Low power consumption type Nil: Non-latch type S: Single coil latch type Nominal coil voltage (A numerical value of coil voltage) UC2 series UD2-3SNU-L Package Nil: Tube L: Embossed carrying tape NU: Standard NUN: Minimum footprint type NE: Low power consumption type NEN: Low power consumption, Minimum foot print type Nil: Non-latch type S: Single coil latch type Nominal coil voltage (A numerical value of coil voltage) UD2 series ORDERING PART NUMBERS UC2 series Option Terminal Packing Standard Tube Trimmed lead Nominal Coil Voltage (VDC) Coil Type Non-latch Single Coil Latch Non-latch Low Power Consumption 3 UC2-3NU UC2-3SNU UC2-3NE 4.5 UC2-4.5NU UC2-4.5SNU UC2-4.5NE 5 UC2-5NU UC2-5SNU UC2-5NE 9 UC2-9NU UC2-9SNU - 12 UC2-12NU UC2-12SNU - 3 UC2-3NJ UC2-3SNJ 4.5 UC2-4.5NJ UC2-4.5SNJ - 5 UC2-5NJ UC2-5SNJ - 9 UC2-9NJ UC2-9SNJ - 12 UC2-12NJ UC2-12SNJ - 6 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES UD2 series Option Terminal Packing Tube Standard Taping Tube Minimum footprint Taping Nominal Coil Voltage (VDC) Coil Type Non-latch Single Coil Latch Non-latch Low Power Consumption 3 UD2-3NU UD2-3SNU UD2-3NE 4.5 UD2-4.5NU UD2-4.5SNU UD2-4.5NE 5 UD2-5NU UD2-5SNU UD2-5NE 9 UD2-9NU UD2-9SNU - 12 UD2-12NU UD2-12SNU - 3 UD2-3NU-L UD2-3SNU-L UD2-3NE-L 4.5 UD2-4.5NU-L UD2-4.5SNU-L UD2-4.5NE-L 5 UD2-5NU-L UD2-5SNU-L UD2-5NE-L 9 UD2-9NU-L UD2-9SNU-L - 12 UD2-12NU-L UD2-12SNU-L - 3 UD2-3NUN UD2-3SNUN UD2-3NEN 4.5 UD2-4.5NUN UD2-4.5SNUN UD2-4.5NEN 5 UD2-5NUN UD2-5SNUN UD2-5NEN 9 UD2-9NUN UD2-9SNUN - 12 UD2-12NUN UD2-12SNUN - 3 UD2-3NUN-L UD2-3SNUN-L UD2-3NEN-L 4.5 UD2-4.5NUN-L UD2-4.5SNUN-L UD2-4.5NEN-L 5 UD2-5NUN-L UD2-5SNUN-L UD2-5NEN-L 9 UD2-9NUN-L UD2-9SNUN-L - 12 UD2-12NUN-L UD2-12SNUN-L - 7 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES PERFORMANCE DATA COIL TEMPERATURE RISE Temperature is measured by coil resistance Coil Coil temperature temperature 60 rise (C ) rise (C) 30 40 20 20 10 Applied power 0.14W 0 0 100 200 300 0 400 Applied power 0.1W 0 5 Applied power (mW) 10 15 20 Applied time (minute) SWITCHING CAPACITY MAXIMUM COIL VOLTAGE This is allowed maximum value. This is a maximum value of permissible alteration. Inquire with EM Devices under continuous use. Inquire with EM Devices for maximum value under continuous DC(Resistive) 2.0 Contact current (A) 1.0 0.5 Ratio nominal of 150 coil voltage 0.2 0.1 (%) 10 20 50 100 APPLIED VOLTAGE VS. TIMING Operate time (ms) 100 50 -40 -20 250VAC Contact voltage (V) 3 3 Release 2 time (ms) 1 100 150 20 40 60 80 100 (Sample:UC2-5NU) 4 0 0 Ambient temperature (C) 220VDC 4 0 Low power consumption type 200 AC(Resistive) 200 Applied power (mW) 250 (Without coil diode) 2 1 0 0 100 200 300 400 Applied power (mW) 8 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES OPERATE AND RELEASE VOLTAGE VS.AMBIENT TEMPERATURE This shows a typical change of operate (release) voltage. The value of must operate is estimated, so coil voltage must be applied more than this value for safety operation. For hot start operation, please inquire with EM Devices. 100 Must operate voltage 80 Ratio of nominal coil voltage (%) Operate voltage (typical) 60 40 Release voltage (typical) 20 0 -40 -20 0 20 40 60 80 100 Ambient temperature (C) RUNNING TEST (Non-load) (Load: none, Drive:5VDC50Hz50%duty, Ambient temperature :room temperature, Sample:UC2-5NU ,20pieces) 10000 5 Contact 1000 resistance (m) Operate voltage Operate 4 voltage 3 (V) Release 2 100 voltage 1 (V) 0 10 0 20 50 100 500 1000 Release voltage 0 20 50 4 Operations (x10 ) 100 500 1000 4 Operations (x10 ) RUNNING TEST(Load) (Load: 50VDC 0.1A resistive,Drive:5VDC,5Hz,50%duty,Ambient temperature:85 C, Sample:UC2-5NU ,10pieces) 5 10000 Operate voltage 4 Contact 1000 Operate 3 voltage 2 (V) 100 Release 1 resistance (m) Release voltage 0 0 10 0 2 5 10 50 100 2 5 10 50 100 4 Operations (x10 ) 4 Operations (x10 ) 9 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES BREAKDOWN VOLTAGE Sample: UC2-5NU 10peices (a) Between open contacts (b) Between adjacent contacts 100 100 50 Distribution 50 Distribution (%) 0 0.5 0 1.0 1.5 2.0 Breakdown voltage (K V) (C) 1.0 1.5 2.0 2.5 Breakdown voltage (K V) Between coil and 100 Distribution (%) 50 0 1.5 2.0 2.5 2.5over Breakdown voltage (K V) ALTERNATION OF VOLTAGE IN DENSE MOUNTING (Magnetic interference) Alternation of operate voltage Alternation of operate voltage +40 +40 +30 +30 +20 +20 +10 Ratio of +10 Ratio of 0 alternation (%) -10 0 alternation (%) -10 -20 -20 -30 -30 -40 a b c d e -40 f a ON ON OFF OFF 3mm b ON d e f OFF ON 2.5mm OFF ON a c Mounting layout Mounting layout Device under test b c d OFF ON OFF ON OFF e f 10 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES PACKING DIMENSIONS (Unit: mm) TUBE PACKING (UC2/UD2) 50 pieces / Tube (anti-static) 12.1 560 11.0 Rubber stopper (Yellow) Rubber stopper (Green) Direction of relay direction mark TAPE PACKING (UD2) APPEARANCE 1200 pieces / Reel Reel diameter: 380mm Reel Emboss Carrying tape Top cover tape TAPE DIMENSIONS A 1.75 2.0 1.5 12 0.4 4 2.2 A 11.5 11.4 24.0 B UD2-xxNU-L UD2-xxNE-L Max.6.2 9.2 UD2-xxNUN-L UD2-xxNEN-L Max.6.6 7.5 B RELAY DIRECTION AND TAPE CARRYING DIRECTION Sprocket hole Direction mark Direction of unreeling 11 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES SOLDERING TEMPERATURE CONDITION THROUGH-HOLE MOUNTING (UC2/UD2) 1. Automatic soldering Preheating: 110~ 120C /110 sec. (max.) Solder temperature: 260C max. Solder time: 5 seconds max. Note: EM Devices recommends cooling down a printed circuit board less than 110C within 40 seconds after soldering. 2. Manual soldering Solder temperature: 350C max. Solder time: 3 seconds max. SURFACE-MOUNTING TYPE (UD2) IRS Method Temperature () max. 240 220 200 180 45 (max.70) Time (sec.) 70 (max.120) 190 (max.300) Note: 1. Temperature profile shows printed circuit board surface temperature on the relay terminal portion. 2. Check the actual soldering condition to use other method except above mentioned temperature profiles. 12 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES NOTE ON CORRECT USE 1. Notes on contact load used within the specified temperature range. Use of a relay Make sure that the contact load is within the specified range; at a temperature outside this range may adversely affect otherwise, the lifetime of the contacts will be shortened insulation or contact performance. considerably. - If the relay is used for a long period of time in highly humid Note that the running performance shown is an example, (RH 85% or higher) environment, moisture may be absorbed and that it into the relay. This moisture may react with the NOx and varies depending on parameters such as the type of load, switching frequency, driver circuit, and ambient temperature under the actual operating conditions. Evaluate the performance by using the actual circuit before SOx generated by glow discharges that occur when the contacts are opened or closed, producing nitric or sulfuric acid. If this happens, the acid produced may corrode the metallic parts of the relay, causing operational malfunction. using the relay. 2. Driving relays - If the internal connection diagram of a relay shows + and symbols on the coil, apply the rated voltage to the relay in the specified direction. If a rippled DC current source is used, abnormalities such as beat at the coil may occur. - If any material containing silicon (silicon rubber, silicon oil, and silicon based coating material) is used in the neighborhood of relay, there is some possibility that these materials will emit silicon gas that will penetrate the relay. In - The maximum voltage that can be applied to the coil of the this case, the switching contact may generate silicon relay compounds on the surface of contacts. This silicon varies depending on the ambient temperature. Generally, the higher the voltage applied to the coil, the compound may result in contact failure. Avoid use of relay in shorter the operating time. Note, however, that a high such an environment. voltage also increases the bounce of the - contacts and Because the operating temperature range varies the contact opening and closing frequency, which may depending on the humidity, use the relay in the temperature shorten the lifetime of the contacts. range illustrated in the figure below. Prevent the relay from - If the driving voltage waveform of the relay coil rises and being frozen and avoid the generation of condensation. falls gradually, the inherent performance of the relay may not be fully realized. Make sure that the voltage waveform 85 80 instantaneously rises and falls as a pulse. 60 Humidity (%RH) 40 Nominal coil voltage 20 0 5 -60 -40 -20 0 20 40 <1msec. <1msec. 60 80 100 Temperature (C ) - The relay maintains constant sealability under normal atmospheric pressure (810 to 1,200 hpa). Its sealability may - For a latching relay, apply a voltage to the coil according to be degraded or the relay may be deformed and malfunction the polarity specified in the internal connection diagram of if it is used under barometric conditions exceeding the the relay. specified range. - If a current is applied to the coil over a long period of time, - The same applies when the relay is stored or transported. the coil temperature rises, promoting generation of organic Keep the upper-limit value of the temperature to which the gas inside the relay, which may result in faulty contacts. In relay is exposed after it is removed from the carton box to this case, use of a latching relay is recommended. within 50C. - The operating time and release time indicate the time - Permanent magnets are used in polarized relays. For this required for each contact to close after the voltage has been reason, when magnets, transformers, or speakers are applied to or located nearby the relay characteristics may change and removed from the coil. However, because the relay has a mechanical structure, a bounce state exists at faulty operations may result. the end of the operating and release times. Furthermore, - If excessive vibration or shock is applied to the relay, it may because additional time is required until the contact malfunction and the contacts remain closed. Vibration or stabilizes after being in a high-resistance state, care must be shock applied to the relay during operation may cause taken when using the relay at high speeds. considerable damage to or wearing of the contacts. Note that 3. Operating environment operation of a snap switch mounted close to the relay or - Make sure that the relay mounted in the application set is shock due to the operation of magnetic solenoid may also 13 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES cause malfunctioning. Simple relay: 855 C, 48 hours. 4. Notes on mounting relays <2> For MBB packing, please use relays within 2 years after - When mounting a relay onto a PC board using an delivery. automatic chip mounter, if excessive force is applied to the (Storage conditions: 30 C / 60% RH) cover of the relay when the relay is chucked or inserted, the After open MBB packing, please use within 3 months. cover may be damaged or the characteristics of the relay (Storage conditions: 30 C / 60% RH) degraded. Keep the force applied to the relay to within 1 kg. - Avoid bending the pins to temporarily secure the relay to the PC board. Bending the pins may degrade sealability or adversely affect the internal mechanism. - It is recommended to solder the relay onto a PC board under the following conditions: <1> Reflow soldering Refer to the recommended soldering temperature profile. <2> Flow soldering Solder temperature: 260C max., Time: 5 seconds max. Preheating: 110~ 120C /110 sec. (max.) <3> Manual soldering Solder temperature: 350C, Time: 2~3 seconds - Ventilation immediately after soldering is recommended. Avoid immersing the relay in cleaning solvent immediately after soldering due to the danger of thermal shock being applied to the relay. - Use an alcohol-based or water-based cleaning solvent. Never use thinner and benzene because they may damage the relay housing. - Do not use ultrasonic cleaning because the vibration energy generated by the ultrasonic waves may cause the contacts to remain closed. 5. Handling - Relays are packaged in magazine cases for shipment. If a space is created in the case after some relays have been removed, be sure to insert a stopper to secure the remaining relays in the case. If relays are not well secured, vibration during transportation may cause malfunctioning of the contacts. - Exercise care in handling the relay so as to avoid dropping it or allowing it to fall. Do not use a relay that has been dropped. If a relay drops from a workbench to the floor, a shock of 9,800 m/s2 (1,000 G) or more is applied to the relay, possibly damaging its functions. Even if a light shock has been applied to the relay, thoroughly evaluate its operation before using it. - Latching relays are factory-set to the reset state for shipment. A latching relay may be set, however, by vibration or shock applied while being transported. Be sure to forcibly reset the relay before using it in the application set. Also note that the relay may be set by unexpected vibration or shock when it is used in a portable set. - The sealability of a surface-mount (SMT) relay may be lost if the relay absorbs moisture and is then heated during soldering. When storing relays, therefore, observe the following points: <1> For standard packing, please use relays within 12 months after delivery. (Storage conditions: 30 C / 60% RH) If the relays have moisture absorption, dehumidify as follows. Tape packing: 505 C, 200~300 hours. 14 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E UC2/UD2 SERIES No part of this document may be copied or reproduced in any form or by any means without the prior written consent of EM Devices Corporation. EM Devices Corporation assumes no resposibility for any errors which may appear in this document. EM Devices Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of EM Devices Corporation or others. While EM Devices Corporation has been making continuous effort to enhance the reliability of its electronic components, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an EM Devices electronic component, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. EM Devices' products are classified into the following three quality grades: "Standard," "Special, "and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of EM Devices' products are "Standard" unless otherwise specified in EM Devices' Data Sheets or Data Books. If customers intend to use EM Devices' products for applications other than those specified for Standard quality grade, they should contact an EM Devices sales representative in advance. (Note) (1) "EM Devices" as used in this statement means EM Devices Corporation and also includes its majorityowned subsidiaries. (2) "EM Devices electronic component products" means any electronic component product developed or manufactured by or for EM Devices (as defined above). 15 All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact EM Devices for updated product data. Please request for a specification sheet for detailed product data prior to the purchase. Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog. 0894EMDD03VOL03E