MINI-BEAM(R) SM2A312CV and SM2A312CV2 Self-contained AC-operated Convergent Mode Sensors * Compact, modulated, self-contained convergent mode sensors for 24-240V ac operation * Produces a precise 1.3 mm (0.05 in) diameter sensing spot at a focus point 16 mm (0.65 in) from the lens surface (model SM2A312CV) or a 3.0 mm (0.12 in) sensing spot at 43 mm (1.70 in) focus (model SM2A312CV2) * Switch-selectable for light operate or dark operate * SPST SCR solid-state output switches up to 300mA; low leakage current and saturation voltage * Rugged, epoxy-encapsulated construction: meets NEMA standards 1, 2, 3, 3S, 4, 4X, 12 and 13; IEC IP67 * Physically and electrically interchangeable with 18 mm barrel-type photoelectrics Visible red, 650 nm MINI-BEAM Convergent Mode Models Range Cable Supply Voltage Output Type Excess Gain Beam Pattern Performance based on 90% reflectance white test card 1000 SM2A312CV 16 mm (0.65 in) SM2A312CV SM2A312CVQD Spot Size at Focus: 1.3 mm (0.05 in) 2 m (6.5 ft) 3-Pin Micro QD 24-240V ac SPST Solid-state 2-Wire E X C E S S G A I N SM2A312CV 3.0 mm Convergent Mode 100 0.12 in Convergent Mode 2.0 mm 0.08 in 1.0 mm 0.04 in 0 10 0 1.0 mm 0.04 in 2.0 mm 0.08 in 3.0 mm 1 1 mm .04 in 0.12 in 0 10 mm .4 in 100 mm 4 in 1000 mm 40 in 7.5 mm 0.3 in 15 mm 22.5 mm 30 mm 37.5 mm 0.6 in 0.9 in 1.2 in 1.5 in DISTANCE DISTANCE 1000 43 mm (1.7 in) SM2A312CV2 SM2A312CV2QD Spot Size at Focus: 3.0 mm (0.12 in) SM2A312CV2 2 m (6.5 ft) 3-Pin Micro QD 24-240V ac SPST Solid-state 2-Wire E X C E S S G A I N Convergent Mode SM2A312CV2 3.0 mm 100 0.12 in Convergent Mode 2.0 mm 0.08 in 1.0 mm 0.04 in 0 10 0 1.0 mm 0.04 in 2.0 mm 0.08 in 3.0 mm 1 1 mm .04 in 0.12 in 0 10 mm .4 in 100 mm 4 in 1000 mm 40 in DISTANCE 25 mm 1 in 50 mm 2 in 75 mm 3 in 100 mm 125 mm 4 in 5 in DISTANCE For Standard MINI-BEAMs: i) 9 m (30 ft) cables are available by adding suffix "W/30" to the model number of any cabled sensor (e.g. - SM2A312CV W/30). ii) A 150 mm (6 in.) long pigtail cable with attached QD connector is available by adding suffix "QDP" to the model number of any MINI-BEAM sensor (e.g. - SM2A312CVQDP). See page 5 for more information. iii) A model with a QD connector requires an accessory mating cable. See page 5 for more information. Printed in USA P/N 03402L7H MINI-BEAM(R) Sensors SM2A312CV and SM2A312CV2 MINI-BEAM Installation and Alignment Proper operation of the SM2A312CV or SM2A312CV2 sensor requires that it be mounted securely and aligned properly. In some applications, excessive movement or vibration can result in intermittent or false operation caused by loss of alignment. For best results, final-mount the sensor in an 18mm-hole by its threaded barrel or use a mounting bracket (see page 6). Begin with the sensor at the approximate position where it will be mounted. With power applied to the circuit and with the sensor set for "light operate", direct the sensor's visible red spot at the object approximately 16 mm (0.65 in) (for model SM2A312CV) or 43 mm (1.7 in) (for model SM2A312CV2) directly in front of the lens. Move the sensor very slightly toward or away from the object while observing the red LED indicator on the back of the sensor. Note the near and far points at which sensing occurs (the range of distance over which the LED remains lit). Mount the sensor at a point approximately midway in the range. This should correspond to the point at which the red sensing spot on the object appears most sharply defined. Mount the sensor at this position and distance. CONVERGENT MODE ALIGNMENT nd rou g ck w Lo vit cti fle Re a yB t jec Ob SM2A312CV or SM2A312CV2 Up ft Le Distance from Sensor lens to object: 16 mm (0.65 in) for SM2A312CV 43 mm (1.7 in) for SM2A312CV2 wn Do SM2A312CV OR CV2 15 Turn Gain Adjustment and Light/Dark Operate Switch* Gasketed Acrylic Cover Red LED lights when the sensor's output is conducting * Note regarding Light/Dark operate switch: * Turn switch fully clockwise for light operate (sensor outputs conduct when object is present) * Turn switch fully counterclockwise for dark operate (sensor outputs conduct when object is absent) page 2 t gh Ri MINI-BEAM(R) Sensors SM2A312CV and SM2A312CV2 MINI-BEAM AC Product Specifications Supply Voltage and Current 24 to 240V ac (50/60 Hz), 250V ac max Supply Protection Circuitry Protected against transient voltages Output Configuration SPST SCR solid-state relay with either normally closed or normally open contact (light/dark operate selectable); 2-wire hookup Output Rating Minimum load current 5 mA; maximum steady-state load capability 300 mA to 50C ambient (122F) 100 mA to 70C ambient (158F) Inrush capability 3 amps for 1 second (non-repetitive); 10 amps for 1 cycle (non-repetitive) Off-state leakage current less than 1.7 mA rms On-state voltage drop 5 volts at 300 mA load, 10 volts at 15 mA load Output Protection Circuitry Protected against false pulse on power-up Output Response Time 4 milliseconds on and off "OFF" response time specification does not include load response of up to 1/2 ac cycle (8.3 milliseconds). Response time specification of load should be considered when important. (NOTE: 300 millisecond delay on power-up.) Repeatability 1.3 milliseconds; Response time and repeatability specifications are independent of signal strength. Adjustments LIGHT/DARK OPERATE select switch, and 15-turn slotted brass screw GAIN (sensitivity) adjustment potentiometer (clutched at both ends of travel). Both controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover. Indicators Red indicator LED on rear of sensor is "ON" when the load is energized Construction Reinforced VALOX(R) housing, totally encapsulated, o-ring sealing, acrylic lenses, and stainless steel screws Environmental Rating Meets NEMA standards 1, 2, 3, 3S, 4, 4X, 12, and 13; IEC IP67 Connections PVC-jacketed 2-conductor 2 m (6.5ft) or 9 m (30ft) cables, or 3-pin micro-style quick disconnect (QD) fitting are available. QD cables are ordered separately. See page 5. Operating Temperature Temperature: -20 to +70C (-4 to +158F) Maximum Relative Humidity: 90% at 50C (non-condensing) Application Notes i) ac MINI-BEAMs may be destroyed from overload conditions ii) Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load iii) The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts Certifications VALOX(R) is a registered trademark of General Electric Company page 3 MINI-BEAM(R) Sensors SM2A312CV and SM2A312CV2 MINI-BEAM AC Hookup Diagrams AC Sensors with Attached Cable AC Sensors with Quick Disconnect (3-Pin Micro-Style) rd/bk bn rd/wh 24-240V ac bu Load 24-240V ac Load gn 3-Pin Micro-Style Pin-out (Cable Connector Shown) Quick Disconnect (QD) Option Green Wire AC MINI-BEAM sensors are sold with either a 2 m (6.5 ft) or a 9 m (30 ft) attached PVC-covered cable, or with a 3-pin micro-style QD cable fitting. Red/Black Wire Red/White Wire AC QD sensors are identified by the letters "QD" in their model number suffix. For more information on mating QD cables, see page 5. MINI-BEAM Dimension Information MINI-BEAM AC Sensor with Integral Cable 3.2 mm (0.13 in) 12.2 mm (0.48 in) 30.7 mm (1.21 in) o 3 mm Clearance (2) 24.1 mm (0.95 in) M18 x 1 x 15 mm Thread (Mounting Nut Supplied) 1/2-20 UNF Thread Quick Disconnect 2 m (6.5 ft) Cable Mounting Peg (o 6.3 mm x 2.5 mm) 20.0 mm (0.79 in) 19.1 mm (0.75 in) 66.0 mm (2.60 in) page 4 MINI-BEAM AC Sensor with Quick-Disconnect 27.4 mm (1.08 in) MINI-BEAM(R) Sensors SM2A312CV and SM2A312CV2 MINI-BEAM MODIFICATIONS Model Suffix Modification Description Example of Model Number W/30 9 meter (30 ft) cable All MINI-BEAM sensors may be ordered with an integral 9 m (30 ft) cable in place of the standard 2 m (6.5 ft) cable SM2A312CV W/30 QDP Pigtail Quick Disconnect All MINI-BEAMs may be built with a 150 mm (6 in) long integral cable which is terminated with the appropriate QD connector. SM2A312CVQDP Replacement Lens Assemblies MINI-BEAM lens assemblies are field-replaceable. Model Description UC-300C.7 Replacement lens for CV UC-300C2 Replacement lens for CV2 Micro-Style Quick Disconnect Cables Cable: PVC jacket, polyurethane connector body, nickel-plated brass coupling nut Conductors: 22 or 20 AWG high-flex stranded, PVC insulation, gold-plated contacts Temperature: -40 to +80C (-40 to +176F) Voltage Rating: 250V ac/300V dc (3-pin), 125V ac/150V dc (4-pin) Style 3-Pin Straight Model MQDC-306 MQDC-315 MQDC-330 Length 2 m (6.5 ft) 5 m (15 ft) 9 m (30 ft) Dimensions Pin-out o15 mm (0.6 in) 44 mm max. (1.7 in) o1/2-20UNF-2B Green Wire Red/White Wire 38 mm max. (1.5 in) 3-Pin Right-angle MQDC-306RA MQDC-315RA MQDC-330RA 2 m (6.5 ft) 5 m (15 ft) 9 m (30 ft) Red/Black Wire 38 mm max. (1.5 in) 1/2-20UNF-2B o15 mm (0.6 in) page 5 MINI-BEAM(R) Sensors SM2A312CV and SM2A312CV2 Extension Cables (without connectors) The following cables are available for extending the length of existing sensor cable. These are 30 m (100 ft) lengths of MINI-BEAM cable. This cable may be spliced to existing cable. Connectors, if used, must be customer-supplied. Type Model EC312A-100 Used with: 2-conductor All MINI-BEAM SM2A312 ac models Mounting Brackets Model Description R 24.1 mm (0.95 in) R 5.1 mm (0.20 in) 10 (TYP) 15 (2) CL 31.8 mm (1.25 in) 4.32 mm (0.170 in) Slot (2) 20.3 mm (0.80 in) 20 SMB312S Stainless steel 2-axis, side mounting bracket o 3.05 mm Slot (0.120 in) o 3.05 mm (0.120 in) 20.1 mm (0.79 in) 90 2.5 mm (0.10 in) R 3.1 mm (0.12 in) (2) 45.5 mm (1.79 in) R 24.1 mm (0.95 in) R 5.1 mm (0.20 in) 15.2 mm (0.60 in) 15 (2) CL 31.8 mm (1.25 in) 20 SMB312PD Stainless steel 18 mm barrelmounting bracket o 4.6 mm Slot (0.18 in) o 4.6 mm (0.18 in) R 3.1 mm (0.12 in) (2) 18.42 mm (0.725 in) 40.6 mm (1.60 in) 90 2.5 mm (0.10 in) 45.5 mm (1.79 in) 4.3 mm Slot (2) (0.17 in) 10 (2) 90 9.1 mm (0.36 in) 10 (2) SMB312B Stainless steel 2-axis, bottom mounting bracket Includes SMB12F (below) 2.5 mm (0.10 in) 3.1 mm Slot (2) (0.12 in) 24.1 mm (0.95 in) 8.6 mm (2) (0.34 in) 17.3 mm (2) (0.68 in) o 6.9 mm (0.27 in) 23.4 mm 11.4 mm (0.92 in) (0.45 in) 35.0 mm (2) (1.38 in) 50.8 mm (2.00 in) CL 6 mm (0.2 in) 6 mm (0.2 in) 5 mm (0.2 in) (2x) SMB46L 15 mm (0.6 in) o36 mm (1.4 in) o6.5 mm (0.26 in) (6x) 8 mm (0.3 in) 16 mm (0.6 in) * "L" bracket * 14 ga 316 stainless steel 65 mm (2.6 in) 54 mm (2.1 in) page 6 2 mm (.1 in) 27 mm (1.1 in) MINI-BEAM(R) Sensors SM2A312CV and SM2A312CV2 Mounting Brackets Model Description Dimensions CL 10 mm (0.4 in) 34 mm (1.3 in) 17 mm (0.7 in) 6 mm (0.2 in) 6 mm (0.2 in) SMB46S * "S" bracket o36 mm (1.4 in) o6.5 mm (0.26 in) (6x) 8 mm (0.3 in) 5 mm (0.2 in) (4x) 3.5 mm (0.14 in) 15 mm (0.6 in) 16 mm (0.6 in) * 14 ga 316 stainless steel 65 mm (2.6 in) 2 mm (.1 in) 54 mm (2.1 in) 27 mm (1.1 in) 16 mm (0.6 in) 34 mm (1.3 in) CL 17 mm (0.7 in) 13 mm (0.5 in) 3.5 mm (0.14 in) 6 mm (0.2 in) SMB46U * "U" bracket * 14 ga 316 stainless steel 6 mm (0.2 in) 5 mm (0.2 in) (4x) 15 mm (0.6 in) 8 mm (0.3 in) 16 mm (0.6 in) o36 mm (1.4 in) o6.5 mm (0.26 in) (6x) 16 mm (0.6 in) 65 mm (2.6 in) 54 mm (2.1 in) 2 mm (.1 in) 40.0 mm (1.60 in) SMB18C * 18 mm split clamp black VALOX(R) bracket * Stainless steel mounting hardware included 42.4 mm (1.67 in) 13 mm (0.5 in) 14.0 mm (0.55 in) 2.5 mm (0.10 in) 46.0 mm (1.81 in) SMB18S * Stainless steel mounting hardware included 70 mm (2.8 in) 21.1 mm (0.83 in) 30.0 mm (1.18 in) * 18 mm swivel, black VALOX(R) bracket 27 mm (1.1 in) 44.5 mm (1.75 in) M5 x 0.8 x 60 mm Screw (2) 10.9 mm (0.43 in) 25.4 mm (1.00 in) 13.0 mm (0.50 in) 36.0 mm (1.42 in) Nut Plate 2.5 mm (0.10 in) Spacer (If Required) Nut Plate 6.4 mm (0.25 in) M5 x 0.8 x 60 mm Screw (2) page 7 MINI-BEAM(R) Sensors SM2A312CV and SM2A312CV2 WARRANTY: Banner Engineering Corporation warrants it products to be free from defects for one year. Banner Engineering Corporation will repair or replace, free of charge, any product of its manufacture found to be defective at the time it is returned to the factory during the warranty period. This warranty does not cover damage or liability for the improper application of Banner products. This warranty is in lieu of any other warranty either expressed or implied. ! WARNING These photoelectric presence sensors do NOT include the self-checking redundant circuitry necessary to allow their use in personnel safety applications. A sensor failure or malfunction can result in either an energized or a de-energized sensor output condition. Never use these products as sensing devices for personnel protection. Their use as a safety device may create an unsafe condition which could lead to serious injury or death. Only MINI-SCREEN(R), MULTI-SCREEN(R), MICRO-SCREENTM, MACHINE-GUARDTM and PERIMETER-GUARDTM Systems, and other systems so designated, are designed to meet OSHA and ANSI machine safety standards for point-of-operation guarding devices. No other Banner sensors or controls are designed to meet these standards, and they must NOT be used as sensing devices for personnel protection. Banner Engineering Corp., 9714 Tenth Ave. No., Minneapolis, MN 55441 Telephone: (612) 544-3164 FAX (applications) (612) 544-3573