P4SMA18A - Littelfuse - Datasheet.Directory

Transient Voltage Suppression Diodes

Speciﬁcations are subject to change without notice.

Revised: 09/06/17

Surface Mount – 400W > P4SMA series

Description

Agency Approvals

Features

• 400W peak pulse power

capability at 10/1000µs

waveform, repetition rate

(duty cycles):0.01%

• Excellent clamping

capability

• Low incremental surge

resistance

• Typical IR less than 1μA

when VBR min>12V

• Optimized surface mount

footprint for minimal PCB

space impact

• Low proﬁle package

• Typical failure mode due

to exceeding maximum

ratings is a short circuit

condition

• Whisker test conducted

based on Table 4a and 4c

of JEDEC JESD201A

• IEC-61000-4-2 ESD

30kV(Air), 30kV (Contact)

• EFT protection of data

lines in accordance with

IEC 61000-4-4

• Built-in strain relief

• Fast response time:

typically less than 1.0ps

from 0V to BV min

• High temperature

to reﬂow soldering

guaranteed: 260°C/40sec

• VBR @ TJ= VBR@25°C

x (1+αT x (TJ - 25))

(αT:Temperature

Coefﬁcient, typical value

is 0.1%)

• UL Recognized epoxy

meeting ﬂammability

classiﬁcation V-0

• Meet MSL level1, per

J-STD-020, LF maximun

peak of 260°C

• Matte tin lead–free Plated

• Halogen-free and RoHS

compliant

• Pb-free E3 means 2nd

level interconnect is

Pb-free and the terminal

ﬁnish material is tin(Sn)

(IPC/JEDEC J-STD-

609A.01)

Applications

TVS devices are ideal for the protection of I/O Interfaces,

VCC bus and other vulnerable circuits used in Telecom,

Computer, Industrial and Consumer electronic

applications.

The P4SMA series is designed speciﬁcally to protect

sensitive electronic equipment from voltage transients

induced by lightning and other transient voltage events.

Maximum Ratings and Thermal Characteristics

(TA=25OC unless otherwise noted)

Parameter Symbol Value Unit

Peak Pulse Power Dissipation at

TA=25ºC by 10/1000µs Waveform

(Fig.2)(Note 1), (Note 2), (Note 5)

PPPM 400 W

Power Dissipation on Inﬁnite Heat

Sink at TL=50OCPD3.3 W

Peak Forward Surge Current, 8.3ms

Single Half Sine Wave (Note 3) IFSM 60 A

Maximum Instantaneous Forward

Voltage at 25A for Unidirectional

Only (Note 4)

VF3.5/5.0 V

Operating Temperature Range TJ-65 to 150 °C

Storage Temperature Range TSTG -65 to 175 °C

Typical Thermal Resistance Junction

to Lead RθJL 30 °C/W

Typical Thermal Resistance Junction

to Ambient RθJA 120 °C/W

Notes:

1. Non-repetitive current pulse, per Fig.4 and derated above TJ (initial) =25ºC per Fig. 3.

2. Mounted on 5.0x5.0mm copper pad to each terminal.

3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional

device only.

4. VF < 3.5V for single die parts and VF< 5.0V for stacked-die parts.

5. The PPPM of stacked-die parts is 600W and please contact littelfuse for the detail

stacked-die parts.

AGENCY AGENCY FILE NUMBER

E230531

P4SMA Series

Functional Diagram

Bi-directional

Uni-directional

Cathode Anode

Uni-directional

Bi-directional

RoHS

Datasheet

Additional Infomarion

Resources

Samples

Transient Voltage Suppression Diodes

Speciﬁcations are subject to change without notice.

Revised: 09/06/17

Surface Mount – 400W > P4SMA series

Electrical Characteristics (TA=25°C unless otherwise noted)

Part

Number

(Uni)

Part

Number

(Bi)

Marking Reverse

Stand off

Voltage VR

(Volts)

Breakdown

Voltage VBR

(Volts) @ IT

Test

Current

(mA)

Maximum

Clamping

Voltage VC

@ Ipp

(V)

Maximum

Peak

Pulse

Current Ipp

(A)

Maximum

Reverse

Leakage IR

@ VR

(µA)

Maximum

Temperature

Coefﬁcient

of VBR

(%/C)

Agency

Approval

UNI BI MIN MAX

P4SMA6.8A P4SMA6.8CA 6V8A 6V8C 5.80 6.45 7. 1 4 10 10.5 39.0 1000 0.041 X

P4SMA7.5A P4SMA7.5CA 7V5A 7V5C 6.40 7. 1 3 7.88 10 11. 3 36.3 500 0.052 X

P4SMA8.2A P4SMA8.2CA 8V2A 8V2C 7.02 7.79 8.61 10 12.1 33.9 200 0.058 X

P4SMA9.1A P4SMA9.1CA 9V1A 9V1C 7.78 8.65 9.55 1 13.4 30.6 50 0.063 X

P4SMA10A P4SMA10CA 10A 10C 8.55 9.50 10.50 1 14.5 28.3 10 0.066 X

P4SMA11A P4SMA11CA 11 A 11C 9.40 10.50 11.60 1 15.6 26.3 5 0.069 X

P4SMA12A P4SMA12CA 12A 12C 10.20 11.40 12.60 1 16.7 24.6 5 0.071 X

P4SMA13A P4SMA13CA 13A 13C 11. 10 12.40 13.70 1 18.2 22.5 1 0.074 X

P4SMA15A P4SMA15CA 15A 15C 12.80 14.30 15.80 1 21.2 19.3 1 0.076 X

P4SMA16A P4SMA16CA 16A 16C 13.60 15.20 16.80 1 22.5 18.2 1 0.080 X

P4SMA18A P4SMA18CA 18A 18C 15.30 1 7. 1 0 18.90 1 25.5 16.1 1 0.083 X

P4SMA20A P4SMA20CA 20A 20C 1 7. 1 0 19.00 21.00 1 27.7 14.8 1 0.085 X

P4SMA22A P4SMA22CA 22A 22C 18.80 20.90 23.10 1 30.6 13.4 1 0.088 X

P4SMA24A P4SMA24CA 24A 24C 20.50 22.80 25.20 1 33.2 12.3 1 0.091 X

P4SMA27A P4SMA27CA 27A 27C 23.10 25.70 28.40 1 37.5 10.9 1 0.092 X

P4SMA30A P4SMA30CA 30A 30C 25.60 28.50 31.50 1 41.4 9.9 1 0.093 X

P4SMA33A P4SMA33CA 33A 33C 28.20 31.40 34.70 1 45.7 9.0 1 0.094 X

P4SMA36A P4SMA36CA 36A 36C 30.80 34.20 37.80 1 49.9 8.2 1 0.096 X

P4SMA39A P4SMA39CA 39A 39C 33.30 37.10 41.00 1 53.9 7.6 1 0.097 X

P4SMA43A P4SMA43CA 43A 43C 36.80 40.90 45.20 1 59.3 6.9 1 0.098 X

P4SMA47A P4SMA47CA 47A 47C 40.20 44.70 49.40 1 64.8 6.3 1 0.099 X

P4SMA51A P4SMA51CA 51A 51C 43.60 48.50 53.60 1 70.1 5.8 1 0.100 X

P4SMA56A P4SMA56CA 56A 56C 47.80 53.20 58.80 1 77.0 5.3 1 0.101 X

P4SMA62A P4SMA62CA 62A 62C 53.00 58.90 65.10 1 85.0 4.8 1 0.102 X

P4SMA68A P4SMA68CA 68A 68C 58.10 64.60 71.40 1 92.0 4.5 1 0.103 X

P4SMA75A P4SMA75CA 75A 75C 64.10 71.30 78.80 1 103.0 4.0 1 0.104 X

P4SMA82A P4SMA82CA 82A 82C 70.10 77.90 86.10 1 113.0 3.6 1 0.105 X

P4SMA91A P4SMA91CA 91A 91C 77.80 86.50 95.50 1 125.0 3.3 1 0.106 X

P4SMA100A P4SMA100CA 100A 100C 85.50 95.00 105.00 1 137.0 3.0 1 0.106 X

P4SMA110A P4SMA110CA 110 A 110C 94.00 105.00 116.00 1 152.0 2.7 1 0.107 X

P4SMA120A P4SMA120CA 120A 120C 102.00 114.00 126.00 1 165.0 2.5 1 0.107 X

P4SMA130A P4SMA130CA 130A 130C 111.0 0 124.00 137.00 1 179.0 2.3 1 0.107 X

P4SMA150A P4SMA150CA 150A 150C 128.00 143.00 158.00 1 207.0 2.0 1 0.108 X

P4SMA160A P4SMA160CA 160A 160C 136.00 152.00 168.00 1 219.0 1.9 1 0.108 X

P4SMA170A P4SMA170CA 170A 170C 145.00 162.00 179.00 1 234.0 1.8 1 0.108 X

P4SMA180A P4SMA180CA 180A 180C 154.00 171.00 189.00 1 246.0 1.7 1 0.108 X

P4SMA200A P4SMA200CA 200A 200C 171.00 190.00 210.00 1 274.0 1.5 1 0.108 X

P4SMA220A P4SMA220CA 220A 220C 185.00 209.00 231.00 1 328.0 1.3 1 0.110

P4SMA250A - 250A - 214.00 237.00 263.00 1 344.0 1.2 1 0.110

P4SMA250CA* 250C 214.00 237.00 263.00 1 344.0 2.2 1 0.110

P4SMA300A - 300A - 256.00 285.00 315.00 1 414.0 1.0 1 0.110

P4SMA300CA* 300C 256.00 285.00 315.00 1 414.0 1. 8 1 0.110

P4SMA350A* P4SMA350CA* 350A 350C 300.00 332.00 368.00 1 482.0 0.9 1 0.112

P4SMA400A* P4SMA400CA* 400A 400C 342.00 380.00 420.00 1 548.0 0.8 1 0.112

P4SMA440A* P4SMA440CA* 440A 440C 376.00 418.00 462.00 1 602.0 0.7 1 0.112

P4SMA480A* P4SMA480CA* 480A 480C 408.00 456.00 504.00 1 658.0 0.6 1 0.112

P4SMA510A* P4SMA510CA* 510A 510C 434.00 485.00 535.00 1 698.0 0.6 1 0.112

P4SMA530A* P4SMA530CA* 530A 530C 451.00 503.50 556.50 1 725.0 0.6 1 0.112

P4SMA540A* P4SMA540CA* 540A 540C 460.00 513.00 567.00 1 740.0 0.5 1 0.112

P4SMA550A* P4SMA550CA* 550A 550C 468.00 522.50 577.50 1 760.0 0.5 1 0.112

For parts without A , the VBR is ± 10% and VC is 5% higher than with A parts

For bidirectional type having VR of 10 volts and less, the IR limit is double.

Transient Voltage Suppression Diodes

Speciﬁcations are subject to change without notice.

Revised: 09/06/17

Surface Mount – 400W > P4SMA series

I-V Curve Characteristics

Ratings and Characteristic Curves (TA=25°C unless otherwise noted)

Voltage Transients

Time

Voltage Across TVS

Current Through TVS

Voltage or Current

Figure 1 - TVS Transients Clamping Waveform

Vc VBR VR

Ipp

Uni-directional

Vc VBR VR

Ipp

VBR

Ipp

Bi-directional

PPPM Peak Pulse Power Dissipation -- Max power dissipation

VR Stand-off Voltage -- Maximum voltage that can be applied to the TVS without operation

VBR Breakdown Voltage -- Maximum voltage that ﬂows though the TVS at a speciﬁed test current (IT)

VC Clamping Voltage -- Peak voltage measured across the TVS at a speciﬁed Ippm (peak impulse current)

IR Reverse Leakage Current -- Current measured at VR

VF Forward Voltage Drop for Uni-directional

continues on next page.

Figure 2 - Peak Pulse Power Rating Curve

-Pulse Width (ms)

PPM

-Peak Pulse Power (kW)

0.1

100

0.0010.010.1 110

Single die,400W

at 10/1000

µs, 25°C

stacked-die, 600W

at 10/1000

µs, 25°C

TJ initial = Tamb

Transient Voltage Suppression Diodes

Speciﬁcations are subject to change without notice.

Revised: 09/06/17

Surface Mount – 400W > P4SMA series

Ratings and Characteristic Curves (TA=25°C unless otherwise noted) (Continued)

100

0255075100 125175

Peak Pulse Power (P

PP) or Current (IPP)

Derating in Percentage

150

TJ - Initial Junction Temperature (ºC)

Figure 3 - Peak Pulse Power Derating Curve

PPM

- Peak Pulse Current, % I

RSM

100

150

1.0 2.0 3.0 4.0

tr=10µsec

Peak Value

IPPM

TJ=25°C

Pulse Width(td) is deﬁned

as the point where the peak

current decays to 50% of IPPM

10/1000µsec. Waveform

as deﬁned by R.E.A

t-Time (ms)

Half Value

IPPM

( )

Figure 4 - Pulse Waveform

Figure 5 - Typical Junction Capacitance

0.1

100

1000

0.0010.010.1 110100 1000

Transient Thermal Impedance (

C/W)

T -Pulse Duration (s)

Figure 6 - Typical Transient Thermal Impedance

110100

IFSM-Peak Forward Surve Current (A)

Number of Cycles at 60 Hz

Figure 7 - Maximum Non-Repetitive Forward Surge

Current Uni-Directional Only

Cj (pF)

VBR - Reverse Breakdown Voltage (V)

Uni/Bi-direconal

Uni

-direconal V=0V

Bi-direconal V=0V

100

1000

10000

110100 1000

0.1

1.0

10.0

100.0

0.01.0 2.03.0 4.05.0 6.07.0 8.09.0

IF-Peak Forward Current (A)

VF-Peak Forward Voltage

(V)

Single die

Stacked-die

Figure 8 - Peak Forward Voltage Drop vs Peak Forward

Current (Typical Values)

Transient Voltage Suppression Diodes

Speciﬁcations are subject to change without notice.

Revised: 09/06/17

Surface Mount – 400W > P4SMA series

Physical Speciﬁcations

Weight 0.002 ounce, 0.061 gram

Case JEDEC DO-214AC. Molded plastic body

over glass passivated junction

Polarity Color band denotes positive end

(cathode) except bidirectional

Terminal Matte Tin-plated leads, Solderable per

JESD22-B102

Dimensions

Soldering Parameters

Temperature (T)

Time (t)

Ts(min)

Ts(max)

Preheat

Ramp-up Critical Zone

TL to TP

Ramp-down

t 25˚C to Peak

25˚C

Reﬂow Condition Lead–free

assembly

Pre Heat

- Temperature Min (Ts(min)) 150°C

- Temperature Max (Ts(max)) 200°C

- Time (min to max) (ts) 60 – 180 secs

Average ramp up rate (Liquidus Temp (TA)

to peak 3°C/second max

TS(max) to TA - Ramp-up Rate 3°C/second max

Reﬂow - Temperature (TA) (Liquidus) 217°C

- Time (min to max) (ts) 60 – 150 seconds

Peak Temperature (TP) 260+0/-5 °C

Time within 5°C of actual peak

Temperature (tp)20 – 40 seconds

Ramp-down Rate 6°C/second max

Time 25°C to peak Temperature (TP) 8 minutes Max.

Do not exceed 260°C

DO-214AC (SMA)

Cathode Band

(for uni-directional products only)

(all dimensions in mm)

Solder Pads

Environmental Speciﬁcations

High Temp. Storage JESD22-A103

HTRB JESD22-A108

Temperature Cycling JESD22-A104

MSL JEDEC-J-STD-020, Level 1

H3TRB JESD22-A101

RSH JESD22-A111

Dimensions

Inches Millimeters

Min Max Min Max

A 0.049 0.065 1.250 1.650

B 0.157 0.181 3.990 4.600

C 0.095 0.110 2.400 2.790

D 0.075 0.090 1.900 2.290

E 0.030 0.060 0.780 1.520

F - 0.008 - 0.203

G 0.189 0.208 4.800 5.280

H 0.006 0.012 0.152 0.305

I 0.070 - 1.800 -

J 0.082 - 2.100 -

K - 0.090 - 2.300

L 0.082 - 2.100 -

Transient Voltage Suppression Diodes

Speciﬁcations are subject to change without notice.

Revised: 09/06/17

Surface Mount – 400W > P4SMA series

Part Numbering System

VBR

VOLTAGE

BI-DIRECTIONAL

VBR

VOLTAGE TOLERANCE

SERIES

P4SMA XXX CA

Packaging

Part number Component

Package Quantity Packaging

Option

Packaging

Speciﬁcation

P4SMAxxxXX DO-214AC 5000 Tape & Reel - 12mm tape/13” reel EIA STD RS-481

Part Marking System

Tape and Reel Speciﬁcation

0.47

(12.0)

0.157

(4.0)

0.157

(4.0)

0.49

(12.5)

0.80 (20.2)

Arbor Hole Dia.

13.0 (330)

Dimensions are in inches

(and millimeters).

Direction of Feed

0.059 DIA

(1.5) Cover tape

Cathode

YMXXX

Marking Code

Trace Code Marking

Y:Year Code

M: Month Code

XXX: Lot Code

Littelfuse Logo

Cathode Band

(for uni-directional products only)

Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and

test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications.

Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.

Mouser Electronics
  
Authorized Distributor
 
  
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
 
 
 
 Littelfuse:   
  P4SMA15CA  P4SMA160C  P4SMA20CA  P4SMA6.8CA  P4SMA130A  P4SMA440CA  P4SMA110CA  P4SMA24A 
P4SMA100  P4SMA43CA  P4SMA51CA  P4SMA10A  P4SMA10CA  P4SMA300C  P4SMA400CA  P4SMA510CA 
P4SMA12A  P4SMA180CA  P4SMA30CA  P4SMA480  P4SMA550CA  P4SMA68CA  P4SMA33C  P4SMA47C 
P4SMA530C  P4SMA56C  P4SMA9.1  P4SMA13  P4SMA22A  P4SMA540A  P4SMA550C  P4SMA7.5CA  P4SMA10C
  P4SMA120C  P4SMA160  P4SMA530A  P4SMA7.5A  P4SMA9.1CA  P4SMA30A  P4SMA62A  P4SMA7.5  P4SMA16
  P4SMA39  P4SMA51A  P4SMA6.8A  P4SMA110A  P4SMA170CA  P4SMA36C  P4SMA24  P4SMA33  P4SMA540C 
P4SMA91C  P4SMA22C  P4SMA100A  P4SMA130  P4SMA15A  P4SMA68A  P4SMA82  P4SMA82A  P4SMA480CA 
P4SMA91A  P4SMA91CA  P4SMA12CA  P4SMA56  P4SMA11CA  P4SMA150C  P4SMA150CA  P4SMA18CA 
P4SMA350C  P4SMA18  P4SMA350  P4SMA15  P4SMA33CA  P4SMA39C  P4SMA550A  P4SMA180C  P4SMA250 
P4SMA510C  P4SMA220C  P4SMA480A  P4SMA75CA  P4SMA540  P4SMA56CA  P4SMA150  P4SMA250CA 
P4SMA62  P4SMA8.2CA  P4SMA9.1A  P4SMA82C  P4SMA9.1C  P4SMA160CA  P4SMA170A  P4SMA200A 
P4SMA100CA  P4SMA13A  P4SMA20C  P4SMA22  P4SMA30C  P4SMA62C  P4SMA10