AS183-92LF - Skyworks Solutions, Inc.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200177 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 6, 2006 1

AS183-92, AS183-92LF: PHEMT GaAs IC SPDT

Switch 300 kHz–2.5 GHz

PRELIMINARY DATA SHEET

Features

●P1 dB 30 dBm typical @ 3 V

●IP3 43 dBm typical @ 3 V

●Low insertion loss (0.3 dB @ 0.9 GHz)

●Low DC power consumption

●Miniature SC-70 6-lead plastic package

●Available lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C

per JEDEC J-STD-020

Description

The AS183-92 is an IC FET SPDT switch in a very small SC-70

6-lead plastic package. The AS183-92 features low insertion

loss and positive voltage operation with very low DC power

consumption. This switch is suitable for handset applications.

Parameter(1) Frequency Min. Typ. Max. Unit

Insertion loss(2) 300 kHz–1.0 GHz 0.30 0.4 dB

300 kHz–2.0 GHz 0.30 0.4 dB

300 kHz–2.5 GHz 0.55 0.6 dB

Isolation 300 kHz–1.0 GHz 18 20 dB

300 kHz–2.0 GHz 12 14 dB

300 kHz–2.5 GHz 11 13 dB

VSWR(3) 300 kHz–2.5 GHz 1.2:1 1.6:1

Electrical Specifications at 25 °C (0, 3 V)

1. All measurements made in a 50 Ωsystem, unless otherwise specified.

2. Insertion loss changes by 0.003 dB/°C.

3. Insertion loss state.

Skyworks offers lead (Pb)-free, RoHS (Restriction of

Hazardous Substances)-compliant packaging.

NEW

Pin Out

12 3

65 4

GND

CBL

J3V2

DC blocking capacitors (CBL) must be supplied externally for positive voltage operation.

CBL = 100 pF for operation >500 MHz.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

December 6, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200177 Rev. C

PRELIMINARY DATA SHEET • AS183-92, AS183-92LF

Typical Performance Data (0, 3 V)

Insertion Loss vs. Frequency

Frequency (GHz)

Insertion Loss (dB)

0.0

0.2

0.4

0.6

0.8

1.0

0 0.5 1.0 1.5 2.0 2.5

VSWR vs. Frequency

Frequency (GHz)

VSWR

1.0

1.1

1.2

1.3

1.4

1.5

0 0.5 1.0 1.5 2.0 2.5

Isolation vs. Frequency

Frequency (GHz)

Isolation (dB)

00.5 1.0 1.5 2.0 2.5

Parameter Condition Frequency Min. Typ. Max. Unit

Switching characteristics

Rise, fall 10/90% or 90/10% RF 10 ns

On, off 50% CTL to 90/10% RF 20 ns

Video feedthru TRISE = 1 ns, BW = 500 MHz 25 mV

Input power for 1 dB compression VCTL = 0/3 V 0.5–2.5 GHz 30 dBm

VCTL = 0/5 V 0.5–2.5 GHz 34 dBm

Intermodulation intercept point (IP3) For two-tone input power 15 dBm

VCTL = 0/3 V 0.5–2.5 GHz 43 dBm

VCTL = 0/5 V 0.5–2.5 GHz 50 dBm

Thermal resistance 25 °C/W

Control voltages VLOW = 0 to 0.2 V @ 20 µA max.

VHIGH = 3 V @ 100 µA max. to 5 V @ 200 µA max.

Operating Characteristics at 25 °C (0, 3 V)

PRELIMINARY DATA SHEET • AS183-92, AS183-92LF

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

200177 Rev. C • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • December 6, 2006 3

V1V2J1–J2J1–J3

High Isolation Insertion loss

VHigh 0 Insertion loss Isolation

Truth Table

All other conditions not recommended.

VHIGH = 3 to 5 V.

Characteristic Value

RF input power 6 W > 500 MHz

0/7 V control

Control voltage -0.2 V, +8 V

Operating temperature -40 °C to +85 °C

Storage temperature -65 °C to +150 °C

Absolute Maximum Ratings

Performance is guaranteed only under the conditions listed in the specifications table and is

not guaranteed under the full range(s) described by the Absolute Maximum specifications.

Exceeding any of the absolute maximum/minimum specifications may result in permanent

damage to the device and will void the warranty.

CAUTION: Although this device is designed to be as robust as

possible, ESD (Electrostatic Discharge) can damage

this device. This device must be protected at all times

from ESD. Static charges may easily produce poten-

tials of several kilovolts on the human body or

equipment, which can discharge without detection.

Industry-standard ESD precautions must be employed

at all times.

0.079 (2.00 mm)

± 0.008 (0.20 mm)

0.049 (1.25 mm)

± 0.004 (0.10 mm)

0.008 (0.20 mm)

± 0.004 (0.10 mm)

0.087 (2.20 mm)

± 0.008 (0.20 mm)

0.035 (0.90 mm)

± 0.004 (0.10 mm)

0.002 (0.005 mm)

± 0.002 (0.005 mm) 0.037 (0.95 mm)

± 0.006 (0.15 mm)

0.010 (0.25 mm)

± 0.006 (0.15 mm)

0.0055

(0.14 mm)

± 0.0015

(0.04 mm)

0.0256 (0.65 mm)

BSC

0.009 (0.23 mm)

Ref

Pin 1 Indicator

SC-70 6-Lead

Recommended Solder Reflow Profiles

Refer to the “Recommended Solder Reflow Profile”

Application Note.

ape and Reel Information

Refer to the “Discrete Devices and IC Switch/Attenuators

Tape and Reel Package Orientation” Application Note.

Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com

December 6, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200177 Rev. C

PRELIMINARY DATA SHEET • AS183-92, AS183-92LF

Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided

by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the

information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to

update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes.

No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or

information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and

Conditions of Sale.

THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A

PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY

DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS

SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION,

LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE

POSSIBILITY OF SUCH DAMAGE.

Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury,

death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any

damages resulting from such improper use or sale.

Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of

products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for

applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters.

Skyworks, the Skyworks symbol, and “Breakthrough Simplicity” are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and

names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are

incorporated by reference.