PLTT www.vishay.com Vishay Dale Thin Film Precision Low TCR High Temperature Thin Film Resistor, Surface Mount Chip, 5 ppm/C TCR, 0.02 % Tolerance FEATURES * PLTT0603 case size is qualified to AEC-Q200 for automotive applications * -55 C to 215 C operating temperature range * TCR of 5 ppm/C standard Available * Tolerances to 0.02 % * Anti corrosion resistant film with (SPM) special passivation method * Stable film and performance characteristics * 0.5 % max. at 2000 h, 215 C, 25 % rated power * Non-standard resistance values available * Very low noise and voltage coefficient (< -30 dB, 0.1 ppm/V) * UL 94 V-0 flame resistant * Gold terminations (10 " to 20 ") * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 Vishay's proven precision thin film wraparound resistors will meet your exact requirements. These resistors are ideal for use in oil industry precision applications requiring low noise, long term stability under high temperature, ultra low temperature coefficient of resistance, and low voltage coefficient. The chip resistors are available in any resistance ohmic value in the range specified below. CONSTRUCTION SPM Passivation Enhancement Available Passivated Nichrome Resistive Film Plated Gold (10 " to 20 ") TYPICAL PERFORMANCE ABSOLUTE Nickel Barrier High Purity Alumina Substrate Adhesion Layer TCR 5 TOL. 0.02 STANDARD ELECTRICAL SPECIFICATIONS TEST Material SPECIFICATIONS CONDITIONS Passivated nichrome - 50 to 3 M - 5 ppm/C -55 C to +215 C 0.1 % to 0.02 % +25 C R 0.5 % 2000 h at 215 C, 25 % rated power - - 0.1 ppm/V (typical) - Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage 100 V to 200 V - Operating Temperature Range -55 C to +215 C - Storage Temperature Range -55 C to +215 C - Noise < - 35 dB (typical) - R 0.01 % 1 year at +25 C Shelf Life Stability: Absolute COMPONENT RATINGS CASE SIZE POWER RATING AT 70 C (mW) WORKING VOLTAGE (V) RESISTANCE RANGE () 0603 150 75 75 to 130K 0805 250 100 250 to 260K 1206 400 200 500 to 775K 2010 800 200 500 to 2M 2512 1000 200 500 to 3M Note * Consult factory for additional case size Revision: 08-Jul-16 Document Number: 60082 1 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PLTT www.vishay.com Vishay Dale Thin Film DIMENSIONS in inches D W T E L CASE SIZE TERM L W T D E 0603 G 0.064 0.006 0.032 0.005 0.015 to 0.033 0.012 0.005 0.015 0.005 0805 G 0.080 0.006 0.050 0.005 0.015 to 0.033 0.016 0.008 0.015 0.005 1206 G 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010 2010 G 0.209 0.009 0.098 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2512 G 0.259 0.009 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 ENVIRONMENTAL TESTS - MIL-PRF-55342 CONDITIONS TYPICAL VISHAY PERFORMANCE Thermal Shock MIL-STD-202 method 107 Cond F, -65 C to +150 C 0.02 % Short Time Overload MIL-PRF-55342 Para 4.8.6, 2.5x rated working voltage 0.01 % ENVIRONMENTAL TEST Low Temperature Operation MIL-PRF-55342 Para 4.8.5, -65 C 0.01 % Resistance to Soldering Heat MIL-STD-202 method 210 0.01 % Moisture Resistance MIL-STD-202 method 106, no power applied 0.02 % MIL-PRF-55342 Para 4.8.7, at 150 C for 100 h 0.02 % Life MIL-STD-202 method 108, 25 % rated power for 2000 h at 215 C 0.50 % TCR MIL-STD-202 method 304 5 ppm/C High Temperature Exposure ENVIRONMENTAL TESTS - AEC-Q200 PLTT0603 Case Size Only ENVIRONMENTAL TEST CONDITIONS TYPICAL VISHAY PERFORMANCE High temperature storage MIL-STD-202 method 108, 1000 h at 125 C 0.10 % Temperature cycling JESD22 method JA-104, 1000 cycles, -55 C to +155 C 0.25 % Moisture resistance MIL-STD-202 method 106, no power applied 0.10 % Biased humidity MIL-STD-202 method 103, 1000 h at 85 C, 85 % RH, 10 % rated power 0.20 % MIL-STD-202 method 108, 1000 h at 175 C, 50 % rated power 0.50 % MIL-STD-202 method 213, condition C 0.02 % Life Mechanical shock Vibration MIL-STD-202 method 204, 10 Hz to 2 kHz 0.02 % MIL-STD-202 method 210, condition B 0.02 % Electrostatic discharge AEC-Q200-002, human body (< 1 k: 1 kV; > 1 k: 2 kV) < 1 k: 1 kV; > 1 k: 2 kV Solderability MIL-STD-883 method 2003 para 2.3.1 and J-STD-002 Pass MIL-STD-202 method 304 5 ppm /C MIL-PRF-55342, 0.5 kg for 30 s minimun Pass AEC-Q200-001 para 4.0 Pass Resistance to soldering heat TCR Die shear Flame retardance Revision: 08-Jul-16 Document Number: 60082 2 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 PLTT www.vishay.com Vishay Dale Thin Film DERATING CURVE Percent of Rated Power 100 75 50 25 0 0 70 175 215 230 Ambient Temperature C PLTT0805 50 k STABILITY TEST RESULTS 0.50 0.50 0.40 0.40 0.30 0.30 Maximum (%) Maximum (%) PLTT0805 500 STABILITY TEST RESULTS 0.20 0.10 0.00 - 0.10 - 0.30 - 0.40 - 0.50 0 0.10 0.00 - 0.10 Test Conditions: Case Size: 0805 Resistance Value: 500 Applied Power: 25 % of rated power Test Chamber Temperature: 215 C - 0.20 0.20 Test Conditions: Case Size: 0805 Resistance Value: 50 k Applied Power: 25 % of rated power Test Chamber Temperature: 215 C - 0.20 - 0.30 - 0.40 - 0.50 125 250 425 500 750 1000 1100 1250 1525 1775 2000 0 125 250 425 500 750 1000 1100 1250 1525 1775 2000 Time on Test (h) Time on Test (h) Note * Performance obtained with following mounting conditions PCB: Polymide IPC-7831A STD land patterns Solder paste: PbSnAg (93.5/5/1.5) GLOBAL PART NUMBER INFORMATION P L T T 0 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PLTT 0603 0805 1206 2010 2512 Z = 5 ppm/C 8 0 5 Z 1 0 0 1 Q G T 1 RESISTANCE TOLERANCE TERMINATION PACKAGING The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. "R" designates the decimal point. Example: 1001 = 1 k 2500 = 250 Special values with more than 4 significant figures, use a R for value below 1 k and a K for values greater than 1 k to signify a decimal point. 982R6 = 982.6 532R41 = 532.41 Q= 0.02 % (1) A = 0.05 % B = 0.1 % D = 0.5 % F=1% G=2% G = Wraparound Gold over Ni barrier (10 " min. Au) WS = WAFFLE WI = 100 min./1mult (item single lot date code) WP = 100 min./1mult (package unit single lot date code) TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult T5 = 500 min., 500 mult TF = Full reel TS = 100 min., 1 mult TI = 100 min./1mult (item single lot date code) TP = 100 min., 1 mult (package unit single lot date code) Note Q tolerances are available only for resistance values 250 . (1) Revision: 08-Jul-16 Document Number: 60082 3 For technical questions, contact: thinfilm@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: PLTT0805Z2520QGT5 PLTT0805Z2550QGT5 PLTT0805Z2580QGT5 PLTT0805Z2610QGT5 PLTT0805Z2800QGT5 PLTT0805Z2840QGT5 PLTT0805Z2870QGT5 PLTT0805Z3010QGT5 PLTT0805Z3050QGT5 PLTT0805Z3090QGT5 PLTT0805Z3160QGT5 PLTT0805Z3200QGT5 PLTT0805Z3240QGT5 PLTT0805Z3360QGT5 PLTT0805Z3400QGT5 PLTT0805Z3440QGT5 PLTT0805Z3570QGT5 PLTT0805Z3610QGT5 PLTT0805Z3700QGT5 PLTT0805Z3790QGT5 PLTT0805Z3830QGT5 PLTT0805Z3920QGT5 PLTT0805Z3970QGT5 PLTT0805Z4070QGT5 PLTT0805Z4120QGT5 PLTT0805Z4170QGT5 PLTT0805Z4220QGT5 PLTT0805Z4270QGT5 PLTT0805Z4320QGT5 PLTT0805Z4370QGT5 PLTT0805Z4420QGT5 PLTT0805Z4640QGT5 PLTT0805Z4810QGT5 PLTT0805Z4870QGT5 PLTT0805Z4930QGT5 PLTT0805Z5050QGT5 PLTT0805Z5110QGT5 PLTT0805Z5170QGT5 PLTT0805Z5360QGT5 PLTT0805Z5420QGT5 PLTT0805Z5620QGT5 PLTT0805Z5690QGT5 PLTT0805Z5760QGT5 PLTT0805Z5830QGT5 PLTT0805Z5900QGT5 PLTT0805Z6120QGT5 PLTT0805Z6190QGT5 PLTT0805Z6260QGT5 PLTT0805Z6490QGT5 PLTT0805Z6570QGT5 PLTT0805Z6650QGT5 PLTT0805Z7150QGT5 PLTT0805Z7500QGT5 PLTT0805Z7590QGT5 PLTT0805Z7770QGT5 PLTT0805Z7870QGT5 PLTT0805Z7960QGT5 PLTT0805Z8060QGT5 PLTT0805Z8160QGT5 PLTT0805Z8250QGT5 PLTT0805Z8450QGT5 PLTT0805Z8560QGT5 PLTT0805Z8660QGT5 PLTT0805Z8760QGT5 PLTT0805Z8870QGT5 PLTT0805Z8980QGT5 PLTT0805Z9420QGT5 PLTT0805Z9530QGT5 PLTT0805Z9650QGT5 PLTT0805Z9760QGT5 PLTT0805Z9880QGT5 PLTT0805Z2520AGT5 PLTT0805Z2610AGT5 PLTT0805Z2640AGT5 PLTT0805Z2770AGT5 PLTT0805Z2800AGT5 PLTT0805Z2870AGT5 PLTT0805Z2980AGT5 PLTT0805Z3010AGT5 PLTT0805Z3160AGT5 PLTT0805Z3200AGT5 PLTT0805Z3240AGT5 PLTT0805Z3280AGT5 PLTT0805Z3320AGT5 PLTT0805Z3360AGT5 PLTT0805Z3400AGT5 PLTT0805Z3520AGT5 PLTT0805Z3650AGT5 PLTT0805Z3700AGT5 PLTT0805Z3790AGT5 PLTT0805Z3880AGT5 PLTT0805Z4170AGT5 PLTT0805Z4220AGT5 PLTT0805Z4420AGT5 PLTT0805Z4480AGT5 PLTT0805Z4530AGT5 PLTT0805Z4590AGT5 PLTT0805Z4640AGT5 PLTT0805Z4750AGT5 PLTT0805Z4810AGT5