PLTT0805Z2082AGT5 - Vishay / Thin Film

PLTT

www.vishay.com Vishay Dale Thin Film

Revision: 08-Jul-16 1Document Number: 60082

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Precision Low TCR High Temperature Thin Film Resistor,

Surface Mount Chip, ± 5 ppm/°C TCR, 0.02 % Tolerance

Vishay’s proven precision thin film wraparound resistors will

meet your exact requirements. These resistors are ideal for

use in oil industry precision applications requiring low noise,

long term stability under high temperature, ultra low

temperature coefficient of resistance, and low voltage

coefficient. The chip resistors are available in any resistance

ohmic value in the range specified below.

CONSTRUCTION

FEATURES

• PLTT0603 case size is qualified to AEC-Q200

for automotive applications

• -55 °C to 215 °C operating temperature range

• TCR of ± 5 ppm/°C standard

• Tolerances to ± 0.02 %

• Anti corrosion resistant film with (SPM) special

passivation method

• Stable film and performance characteristics

• 0.5 % max. at 2000 h, 215 °C, 25 % rated power

• Non-standard resistance values available

• Very low noise and voltage coefficient 

(< -30 dB, 0.1 ppm/V)

• UL 94 V-0 flame resistant

• Gold terminations (10 μ" to 20 μ")

• Material categorization: for definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL PERFORMANCE

Note

• Consult factory for additional case size

Adhesion Layer

High Purity

Alumina Substrate

Nickel Barrier

Plated

Gold (10 μ" to 20 μ")

SPM Passivation

Enhancement

Passivated Nichrome

Resistive Film

ABSOLUTE

TCR 5

TOL. 0.02

Available

STANDARD ELECTRICAL SPECIFICATIONS

TEST SPECIFICATIONS CONDITIONS

Material Passivated nichrome -

Resistance Range 50  to 3 M-

TCR: Absolute ± 5 ppm/°C -55 °C to +215 °C

Tolerance: Absolute ± 0.1 % to ± 0.02 % +25 °C

Stability: Absolute R ± 0.5 % 2000 h at 215 °C, 25 % rated power

Stability: Ratio --

Voltage Coefficient ± 0.1 ppm/V (typical) -

Working Voltage 100 V to 200 V -

Operating Temperature Range -55 °C to +215 °C -

Storage Temperature Range -55 °C to +215 °C -

Noise < - 35 dB (typical) -

Shelf Life Stability: Absolute R ± 0.01 % 1 year at +25 °C

COMPONENT RATINGS

CASE SIZE

POWER RATING

AT 70 °C

(mW)

WORKING VOLTAGE

(V)

RESISTANCE RANGE

()

0603 150 75 75 to 130K

0805 250 100 250 to 260K

1206 400 200 500 to 775K

2010 800 200 500 to 2M

2512 1000 200 500 to 3M

PLTT

www.vishay.com Vishay Dale Thin Film

Revision: 08-Jul-16 2Document Number: 60082

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in inches

CASE SIZE TERM L W T D E

0603 G 0.064 ± 0.006 0.032 ± 0.005 0.015 to 0.033 0.012 ± 0.005 0.015 ± 0.005

0805 G 0.080 ± 0.006 0.050 ± 0.005 0.015 to 0.033 0.016 ± 0.008 0.015 ± 0.005

1206 G 0.126 ± 0.008 0.063 ± 0.005 0.015 to 0.033 0.020 + 0.005/- 0.010 0.020 + 0.005/- 0.010

2010 G 0.209 ± 0.009 0.098 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005

2512 G 0.259 ± 0.009 0.124 ± 0.005 0.015 to 0.033 0.020 ± 0.005 0.020 ± 0.005

ENVIRONMENTAL TESTS - MIL-PRF-55342

ENVIRONMENTAL TEST CONDITIONS TYPICAL VISHAY

PERFORMANCE

Thermal Shock MIL-STD-202 method 107 Cond F, -65 °C to +150 °C ± 0.02 %

Short Time Overload MIL-PRF-55342 Para 4.8.6, 2.5x rated working voltage ± 0.01 %

Low Temperature Operation MIL-PRF-55342 Para 4.8.5, -65 °C ± 0.01 %

Resistance to Soldering Heat MIL-STD-202 method 210 ± 0.01 %

Moisture Resistance MIL-STD-202 method 106, no power applied ± 0.02 %

High Temperature Exposure MIL-PRF-55342 Para 4.8.7, at 150 °C for 100 h ± 0.02 %

Life MIL-STD-202 method 108, 25 % rated power

for 2000 h at 215 °C ± 0.50 %

TCR MIL-STD-202 method 304 ± 5 ppm/°C

ENVIRONMENTAL TESTS - AEC-Q200 PLTT0603 Case Size Only

ENVIRONMENTAL TEST CONDITIONS TYPICAL VISHAY

PERFORMANCE

High temperature storage MIL-STD-202 method 108, 1000 h at 125 °C ± 0.10 %

Temperature cycling JESD22 method JA-104, 1000 cycles,

-55 °C to +155 °C ± 0.25 %

Moisture resistance MIL-STD-202 method 106, no power applied ± 0.10 %

Biased humidity MIL-STD-202 method 103, 1000 h at 85 °C,

85 % RH, 10 % rated power ± 0.20 %

Life MIL-STD-202 method 108,

1000 h at 175 °C, 50 % rated power ± 0.50 %

Mechanical shock MIL-STD-202 method 213, condition C ± 0.02 %

Vibration MIL-STD-202 method 204, 10 Hz to 2 kHz ± 0.02 %

Resistance to soldering heat MIL-STD-202 method 210, condition B ± 0.02 %

Electrostatic discharge AEC-Q200-002, human body (< 1 k: 1 kV; > 1 k: 2 kV) < 1 k: 1 kV; > 1 k: 2 kV

Solderability MIL-STD-883 method 2003 para 2.3.1 and J-STD-002 Pass

TCR MIL-STD-202 method 304 ± 5 ppm /°C

Die shear MIL-PRF-55342, 0.5 kg for 30 s minimun Pass

Flame retardance AEC-Q200-001 para 4.0 Pass

PLTT

www.vishay.com Vishay Dale Thin Film

Revision: 08-Jul-16 3Document Number: 60082

For technical questions, contact: thinfilm@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

• Performance obtained with following mounting conditions 

PCB: Polymide IPC-7831A STD land patterns

Solder paste: PbSnAg (93.5/5/1.5)

Note

(1) Q tolerances are available only for resistance values  250 .

DERATING CURVE

Ambient Temperature °C

070 215230

Percent of Rated Power

100

175

PLTT0805 500  STABILITY TEST RESULTS

Time on Test (h)

Maximum Δ (%)

- 0.50

- 0.30

- 0.10

0.10

0.30

0.50

0.00

0.20

0.40

- 0.20

- 0.40

425 1525125011001000750 2000500 17752501250

Test Conditions:

Case Size: 0805

Resistance Value: 500 Ω

Applied Power: 25 % of rated power

Test Chamber Temperature: 215 °C

PLTT0805 50 k STABILITY TEST RESULTS

Time on Test (h)

Maximum Δ (%)

- 0.50

- 0.30

- 0.10

0.10

0.30

0.50

0.00

0.20

0.40

- 0.20

- 0.40

425 1525125011001000750 2000500 17752501250

Test Conditions:

Case Size: 0805

Resistance Value: 50 kΩ

Applied Power: 25 % of rated power

Test Chamber Temperature: 215 °C

GLOBAL PART NUMBER INFORMATION

GLOBAL

MODEL

CASE

SIZE

TCR

CHARACTERISTIC RESISTANCE TOLERANCE TERMINATION PACKAGING

PLTT 0603

0805

1206

2010

2512

Z = ± 5 ppm/°C The first 3 digits are

significant figures and

the last digit specifies

the number of zeros to

follow. “R” designates

the decimal point.



Example:

1001 = 1 k

2500 = 250 



Special values with more

than 4 significant figures,

use a R for value below

1 k and a K for values

greater than 1 k to

signify a decimal point.



982R6 = 982.6 

532R41 = 532.41 

Q =

± 0.02 % (1)

A = ± 0.05 %

B = ± 0.1 %

D = ± 0.5 %

F = ± 1 %

G = ± 2 %

G = Wraparound Gold 

over Ni barrier

(10 μ" min. Au)

WS = WAFFLE 

WI = 100 min./1mult

(item single lot date code)

WP = 100 min./1mult

(package unit single lot

date code)



TAPE AND REEL

T0 = 100 min., 100 mult

T1 = 1000 min., 1000 mult

T5 = 500 min., 500 mult

TF = Full reel

TS = 100 min., 1 mult

TI = 100 min./1mult

(item single lot date code)

TP = 100 min., 1 mult

(package unit single lot

date code)

05Z1 01Q00 GT1TPL 8

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 08-Feb-17 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Vishay:

PLTT0805Z2520QGT5 PLTT0805Z2550QGT5 PLTT0805Z2580QGT5 PLTT0805Z2610QGT5

PLTT0805Z2800QGT5 PLTT0805Z2840QGT5 PLTT0805Z2870QGT5 PLTT0805Z3010QGT5 PLTT0805Z3050QGT5

PLTT0805Z3090QGT5 PLTT0805Z3160QGT5 PLTT0805Z3200QGT5 PLTT0805Z3240QGT5

PLTT0805Z3360QGT5 PLTT0805Z3400QGT5 PLTT0805Z3440QGT5 PLTT0805Z3570QGT5 PLTT0805Z3610QGT5

PLTT0805Z3700QGT5 PLTT0805Z3790QGT5 PLTT0805Z3830QGT5 PLTT0805Z3920QGT5

PLTT0805Z3970QGT5 PLTT0805Z4070QGT5 PLTT0805Z4120QGT5 PLTT0805Z4170QGT5 PLTT0805Z4220QGT5

PLTT0805Z4270QGT5 PLTT0805Z4320QGT5 PLTT0805Z4370QGT5 PLTT0805Z4420QGT5

PLTT0805Z4640QGT5 PLTT0805Z4810QGT5 PLTT0805Z4870QGT5 PLTT0805Z4930QGT5 PLTT0805Z5050QGT5

PLTT0805Z5110QGT5 PLTT0805Z5170QGT5 PLTT0805Z5360QGT5 PLTT0805Z5420QGT5

PLTT0805Z5620QGT5 PLTT0805Z5690QGT5 PLTT0805Z5760QGT5 PLTT0805Z5830QGT5 PLTT0805Z5900QGT5

PLTT0805Z6120QGT5 PLTT0805Z6190QGT5 PLTT0805Z6260QGT5 PLTT0805Z6490QGT5

PLTT0805Z6570QGT5 PLTT0805Z6650QGT5 PLTT0805Z7150QGT5 PLTT0805Z7500QGT5 PLTT0805Z7590QGT5

PLTT0805Z7770QGT5 PLTT0805Z7870QGT5 PLTT0805Z7960QGT5 PLTT0805Z8060QGT5

PLTT0805Z8160QGT5 PLTT0805Z8250QGT5 PLTT0805Z8450QGT5 PLTT0805Z8560QGT5 PLTT0805Z8660QGT5

PLTT0805Z8760QGT5 PLTT0805Z8870QGT5 PLTT0805Z8980QGT5 PLTT0805Z9420QGT5

PLTT0805Z9530QGT5 PLTT0805Z9650QGT5 PLTT0805Z9760QGT5 PLTT0805Z9880QGT5 PLTT0805Z2520AGT5

PLTT0805Z2610AGT5 PLTT0805Z2640AGT5 PLTT0805Z2770AGT5 PLTT0805Z2800AGT5 PLTT0805Z2870AGT5

PLTT0805Z2980AGT5 PLTT0805Z3010AGT5 PLTT0805Z3160AGT5 PLTT0805Z3200AGT5 PLTT0805Z3240AGT5

PLTT0805Z3280AGT5 PLTT0805Z3320AGT5 PLTT0805Z3360AGT5 PLTT0805Z3400AGT5 PLTT0805Z3520AGT5

PLTT0805Z3650AGT5 PLTT0805Z3700AGT5 PLTT0805Z3790AGT5 PLTT0805Z3880AGT5 PLTT0805Z4170AGT5

PLTT0805Z4220AGT5 PLTT0805Z4420AGT5 PLTT0805Z4480AGT5 PLTT0805Z4530AGT5 PLTT0805Z4590AGT5

PLTT0805Z4640AGT5 PLTT0805Z4750AGT5 PLTT0805Z4810AGT5