1500 series Toggle switches - insulated lever and bushing Distinctive features and specifications UL and VDE (EN 61058-1) approved A Variety of actuator styles and colours ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : 6A 250VAC (10.000 cycles) 10A 125VAC (6.000 cycles) 5A 12VDC (10.000 cycles) * Initial contact resistance : 10 m max. * Insulation resistance : 1.000M min. at 500VDC * Dielectric strength : 2.000 Vrms 50 Hz min. between terminals and between terminals and metal panel MATERIALS * Case : polyamide * Actuator : polyamide * Bushing : polyamide * Contacts : silver GENERAL SPECIFICATIONS * Torque : 0,95 Nm (.700 Ft.lb) max. applied to nut * Panel thickness : 4,5 mm (.177) between 2 nuts * Operating temperature : -20C to +55C AGENCY APPROVALS EN 61058-1 Availability : all models Marking : To order switches marked UL and/or VDE, complete appropriate box of ordering format. ABOUT THIS SERIES Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. Sealing boots are available to protect the switches against dust and water. They are presented in section H. Mounting accessories : standard hardware supplied with all models : 1 hex nut U166 and 1 knurled nut U411. Standard and special hardware available are presented in section I. Packaging unit : 50 pieces per type and colour. A-88 www.apem.com APEM 1500 series Toggle switches - insulated lever and bushing Solder lug or quick-connect terminals 7.00 (.275) 5.20 (.204) 1.30 (.051) 3.10 (.122) * 2 and 3 maintained positions * Silver contacts standard * Single pole configurations Keyway 4.70x0.80 (.185x.031) 2.80x0.80 (.11x.031) MODEL STRUCTURE Keyway Solder lug terminals I O6.00 (.236DIA) OFF ON ON 15.00 (.59) 9.50 (.374) OFF (.472) 12.00 7.00 (.275) I O6.00 (.236DIA) OFF OFF ON ON III 15.00 (.59) 10.50 (.413) III II 30 7.00 9.50 (.275) (.374) ON ON ON 1531A8 1536A8 1539A8 II O12.00x0.75 SI (.472DIAx0.75 IS) I 7.00 (.275) 18.80 (.74) Keyway Quick-connect terminals 4,7 x 0,8 (.185 x .031) III 10.50 (.413) III 5.20 (.204) ON ON ON 1531A2 1536A2 1539A2 II O12.00x0.75 SI (.472DIAx0.75 IS) I II 30 12.00 (.472) 7.00 (.275) 7.00 (.275) 18.80 (.74) PANEL CUT-OUT O12.20 (.48DIA) O12.50 (.492DIA) 5.10 (.20) O3.50 (.137DIA) APEM 9.60 (.377) O12.20 (.48DIA) 1.70 (.066) www.apem.com A-89 A 1500 series Toggle switches - insulated lever and bushing ACTUATORS Polyamide A Black Red White Orange Polyamide L12 L16 L17 L19 Black Red White Orange Polyamide L22 L26 L27 L29 Black Red White Orange L32 L36 L37 L39 Brass, nickel plated L1N Standard Flat Dual cone Polyamide Black Red White Orange L42 L46 L47 L49 Cylindrical AGENCY APPROVALS UL VDE Availability : all models. Marking : to order switches marked UL and/or VDE, complete above box with desired approvals. A-90 www.apem.com APEM