Document Number: 36020 For technical questions contact: connectors@vishay.com www.vishay.com
Revision: 14-Feb-07 22
Rack and Panel Connectors Side Mount
G20
Vishay Dale
APPLICATIONS
Broad - limited only by those applications requiring physical,
electrical and/or materials specifications exceeding those
indicated.
ELECTRICAL SPECIFICATIONS
Breakdown Voltage (Contact to Contact):
At sea level: 5000 VRMS
At 70 000 feet [21 336 meters]: 650 VRMS
Current Rating: 7.5 A
FEATURES
• Body components available with any desired pin and
socket combination
• Contacts float in molding to aid in aligning and in
withstanding vibration
• Polarization accomplished by reversed pin and socket
combination
• Barriers for increased creepage distance
• Thru hold permits use of building block technique or flat
mounting
MATERIAL SPECIFICATIONS
Standard Body: Glass-filled diallyl phthalate per ASTM
D 5948-96 green, flame retardant
Pin Contacts: Brass
Socket Contacts: Phosphor bronze
Contact Plating: Gold, 10 micro-inches
PHYSICAL SPECIFICATIONS
Minimum Creepage Path between Contacts:
0.25" [6.35 mm]
Minimum Air Space between Contacts: 0.19" [4.76 mm]
Maximum Wire Size: #20 AWG
G20S-A
G20P-A
DIMENSIONS in inches [millimeters]
G20P-A
0.750
[19.05]
0.180
[4.57]
0.218
[5.54]
0.040
Dia.
[1.02]
Socket
Contact
“C”
Ring
0.359
[9.13]
0.440
[11.1]
0.265
[6.73]
Body
A
B
0.125
[3.17]
0.093 [2.36]
Dia.
Pin Contact,
0.046 [1.17] Dia.
Solder Cup for
#20 AWG Wire Typ.
G20S-A 0.125
[3.17]
0.440
[11.1]
Body
0.265
[6.73]
A
B
0.359
[9.13]
0.093 [2.36]
Dia.
0.218
[5.54]
Pin Contact
“C” Ring
0.750
[19.05]
0.180
[4.57]
0.200
[5.08]
0.040
[1.02]
Dia.
Socket Contact
0.046 [1.17] Dia.
Solder Cup for
#20 AWG Wire
Typ.
ORDERING INFORMATION
EXAMPLE 1:
G20P-A = Connector with pin contact
in position “A” and socket contact in
position “B”
G20
MODEL
G20 - Side Mount with 2 positions
for #20 AWG contacts
AB
B
A
CONTACT VARIATIONS
Designates pin contact positions in a
G20P connector or socket contact
positions in a G20S connector
EXAMPLE 3:
G20P-AB = Connector with
pin contacts in both positions
(would mate with G20S-AB)
S
P
BODY STYLE
P - Pin style body. S - Socket style body.
These designators are used to identify mating
connectors. If designator 3 is the same, a
connector designated G20P will mate with a
connector designated G20S
EXAMPLE 2:
G20S-A = Connector with socket contact in
position “A” and pin contact in position “B”
(would mate with example 1 at left)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 08-Feb-17 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED
